Rigid PCB manufacturers in China: a ceiling is not a window
A rigid PCB quote turns on three readings of the same capability row: the ceiling a press can reach, the window a line will run between, and the acceptance class that makes two quotes the same product. Most Chinese factories print the first, some print the second, and none of the 63 profiles here prints the third.
Counted across 63 published rigid profiles, last reviewed 2026-11-13. See how evidence levels work.
Rigid PCB: recorded factories
Every published rigid factory profile, ordered by evidence strength and review date. Each card links to a profile with its registered Chinese name, the plant cities it operates, and the capability rows the company publishes — thickness, copper weight, panel size, hole size and aspect ratio where they are stated.
Lanshun Technology (Shenzhen)
Lanshun lists 19 SMT machines and no board-making gear, yet its own table quotes 46 layers. Registered scope stops at assembly. Who makes the bare board?
Huangshi WUS Electronics
Huangshi WUS has 4,017 staff and RMB 2.929bn 2024 revenue, and its licence explicitly says HDI production. Its industry code is C3969.
Jiangmen Suntak Circuit Technology
Suntak's Jiangmen subsidiary has RMB 800m paid-in capital, 2,532 staff and RMB 3.841bn 2025 revenue, with board production in its licence.
Kunshan Dingxin Electronics
Kunshan Dingxin changed its legal representative and most of its board in July 2026, while a hiring page still names the previous one.
Zhuhai Suntak Circuit Technology
Zhuhai Suntak is filed under I6520 IC design, yet its licence names double-sided, multilayer and flexible board production, with 2,201 staff.
Aohong Electronics
Two thirds of Aohong capacity is single-sided, unusual in a directory of multilayer factories. Its 12-layer sample is the highest count it shows.
Aoshikang Technology (Yiyang)
Aoshikang's 2024 output of 6.70 million m2 covers Zhaoqing and Thailand too; the Yiyang 6.00 million m2 is an EIA design limit, not output.
AT&S China (Shanghai)
A Vienna-listed group's volume HDI line in Minhang, licensed for 970,000 m2 a year per a 2022 EIA - but IC substrates are Chongqing and Kulim business.
Benchuan Intelligent Circuit (Nanjing)
Benchuan lists four production bases, but its Zhuhai plant was bought from DSBJ in 2024 for RMB 39.5m. The registry shows one address.
C-Flex (Huangshi Xipu Electronics)
Its single page claims first place in China for camera-module FPC by units shipped in 2024. No second source, no certificate numbers, no product pages.
Camelot Electronics (Qingyuan)
Camelot quotes 4.3m m2 of annual PCB capacity as of end-2025, but two new lines only started in July and September 2026. The figure is a snapshot.
Chengde Electronic (Guangdong Chengde)
Chengde is NEEQ-listed with public financials. Its site quotes capacity in yuan, an industry profile in square metres, and two founding years disagree.
Chengzhiyi Circuit (Ji'an)
The Ji'an entity registered in 2022, but the profile quotes 2008, 30,000 m2 and 100,000 m2 a month as group figures without naming a site.
Cixi Qingbao Electronic Technology
Cixi Qingbao publishes 3 mil line/space; a 2026 Ningbo government article says 0.15 mm. Both are in print, neither is dated, and output figures differ too.
CMK Electronics (Wuxi) - CMK Corporation
CMK's Wuxi plant: 36,000 m2 a month or 480,000 m2 a year, and 670, 700 or 528 staff. The same CMK brand also names a different Dongguan company.
Compeq Huizhou (Boluo)
Compeq's 1995 Boluo plant holds 170,000 m2 and 3,200 staff, but the data-centre products sit with the Thai plant, not with Huizhou.
Delton Technology (Guangzhou)
A Hong Kong listing document says Guangzhou handles high-end server boards while Huangshi takes consumer and industrial work. The order split is written down.
Delton Technology (Huangshi)
A university visit page calls this the largest single PCB plant in the world. The company's own homepage gives 29,500 m2. Both cannot be right.
Dongguan Dingxin Circuit
Dingxin's milestone page ends at a 2018 Hunan plant, but filings show that plant was exited in 2023 and capital was cut in 2025.
Dongguan Lianqiao Electronics (L-Bridge)
A 16,000 m2 appliance-board plant that publishes real dimensions for four boards and dates for four of its five certificates. The fifth is contested.
Dongguan Viafull Circuit Technology
Viafull publishes UL file E466925, a checkable number, yet its own page quotes both 1-14 and 2-16 layers and 180 staff against 41 in filings.
Dongguan Yuejie Circuit Technology
Yuejie lists 64 layers, 10oz copper and IC substrates, yet its registry record shows three staff, four former names and a residential address.
Dynamic Electronics (Huangshi)
Three years get quoted as this plant's founding: the group's 1988, the company's 2015, first output in 2017. Only the last one is a production date.
Gaodeng Electronics (Yiyang)
The brand is a 1991 Hong Kong group, but Hunan Gaodeng is a domestic LLC held by natural persons; its 300,000 m2 a month is a target, not a verified output.
Hangzhou Lin'an Pengyu
Pengyu has 16,807 m2 of site in Lin'an, 4 to 12 layer boards and named appliance customers. It also states its headcount three different ways.
HannStar Board Technology (Jiangyin)
HannStar Jiangyin is listed at 5.5 million ft2 a month; the group quotes 11 million including two other units. Its 34-layer claim is a limited run.
Heshan TTE Circuit
Heshan TTE's published capacity spans six figures, from an existing 130,000 m2/yr to an 800,000 m2/yr full-build target. Only one is a current licence.
Huizhou Glorysky Electronics
Glorysky's process table runs three year columns: 32 layers now, 36 in 2027 and 78 in 2028. Directories quote the last column as if it were today.
Jiangsu Difeida Electronics
The Difeida name covers a 1997 PCB fab and a separate EMS company that carried NEEQ code 873105. Only one of them owns dfd338.com and the drill floor.
Jiangsu Hehong Electronics - Shanghai Hehong
Jiangsu Hehong's Dongtai base is quoted at 100,000 or 60,000 m2 a month, while its NEEQ-listed Shanghai parent reports 75.16% utilisation for 2025.
Jiangsu Xiehe Electronics
The same 2025 turnover appears as RMB 979 million in Chinese and USD 145 million in English; audited FY2024 was RMB 853.5 million on 1.15 million m2.
Jiangsu Yuantai Electronic Technology
Yuantai's 1.8 million m2 a year and RMB 1.5 billion sales are planned or full-production targets, not achieved output. First phase started in late 2023.
Jinhong Electronics (Ji'an)
Jinhong's own pages give three plant areas, three headcounts and four layer counts, and call the site both a quick-turn shop and a volume factory.
JOVEPCB (Zhongfu Circuit)
JOVEPCB describes three production bases in Chinese and five in English, and quotes 34 layers that turn out to be a prototype limit, not a production one.
King Brother (KINGBROTHER)
Kingbrother books 100,000 PCB part numbers a year, while an older page on the same site implies 120,000. Neither figure is in square metres.
Kunshan Huaxin Electronics Group
A private Kunshan group claiming 2.2 or 2.6 million m2 a year, 2,200 or 2,300 staff and three addresses. Its certificates are editions withdrawn before 2010.
Lidebao Electronics (Xiamen)
Lidebao publishes MCPCB specs down to the model, but its only UL file, E480769, covers a high-thermal adhesive film rather than a finished board.
Mankun Technology (Ji'an)
One Mankun page mixes a 2025 product mix of 22.22% with a Thailand design target of 67.27%, and states capacity that is a group total, not a Ji'an one.
Mingzhenghong Electronics (Yiyang)
The English page claims 410,000 m2 a month but its own items sum to 590,000; Shenzhen and Jiangmen are finishing plants under one Yiyang legal person.
Nan Ya PCB (Kunshan)
Nanya's Kunshan entity has 3,931 staff and USD 275.8m in capital, but its 2026 equipment filing says total output stays unchanged.
Ningbo Dongya Circuit Board (Beilun)
Dongya's dypcb.com lands on a domain-parking page and nbdypcb.com returns 502, so every Beilun capacity figure comes from a parent site or a directory card.
Ningbo Kehaoda Electronics
Kehaoda's one spec page quotes a 26:1 aspect ratio and 12 mil laser drills on a 4,500 m² site, while its 2024 environmental filing covers a single-sided line.
Ningbo Zonbo Electrical
Zonbo claims 12,000 m² of PCB fabrication a month, yet its registered scope covers appliances and auto parts and every catalogue item is an assembled board.
Onpress PCB (Guangdong Anbai Circuit)
Onpress dates to 1987 in Hong Kong, 1992 as a relocation and 1993 as a PRC entity. Its published capacity uses four units that cannot be reconciled.
Putian Technology PCB (formerly GCI Jiesai)
Putian Technology is a CETC-controlled listed group whose PCB arm runs two named bases. Its 88-layer claim sits beside a 40-layer design limit.
Q&D Circuits (Qiangda)
Q&D Circuits runs 50-layer builds and 10,000 part numbers a month from Shenzhen, but its own pages disagree on whether it employs 1,200 people or 1,350.
Redboard Technology (Ji'an)
Redboard's sharpest numbers come from two different documents: a 2026 IPO prospectus and a 2023 tax-bureau visit to one Ji'an site.
Reyhelm Electronics (Ji'an)
The Chinese site says 150 staff and 50,000 m2 a month; the English site says 300 staff and 30,000 m2, and neither version is marked as current.
Sanlicheng Technology (Yiyang)
Sanlicheng moved its production from Huizhou to Yiyang, but 700,000 m2 a month is a website plan; a 2025 government note records four lines at 100,000.
Shanghai Jiajietong (Fast-PCB)
Jiajietong's Jiading address runs real etch lines - two plants plus a 2025 expansion - yet the same site prints four plant-area pairs and three age claims.
Shanghai Meadville Electronics (SME, AKM Meadville)
TTM sold Shanghai Meadville and substrate sister SMST to AKM Meadville for US$550m in 2020 - yet recruitment pages still describe SME as a TTM member.
Shenzhen Lianshuo Precision Electronics
Lianshuo's site claims a 2002 founding and 2003 certifications, but its registry date is 2012 and its own certificate page lists only ISO9001.
Shenzhen Xinzhida Electronics
Xinzhida's site claims 1-40 layers and 30,000 m2 a month, but its registered entity has four staff and a wholesale-only business scope.
Stariver Circuit (Huangshi)
Three headcount figures for one plant, falling from 400 to 170, against an unchanged 120,000 m2 a month. Either the count is partial or the lines are quiet.
Tripod Electronics (Wuxi) - Tripod Technology
Tripod's Wuxi site is credited with 500,000 m2 a year of HDI, but that is one approved 2019 project, not the plant. Headcount reads 14,510 or nearly 20,000.
Unimicron Huangshi (Xinyixing)
Two names, two addresses and three investment figures attach to one Unimicron site. No certificate number has been published since output began in 2018.
Unitech PCB (Shanghai Zhanhua)
Production moved to Nantong in 2020 - the Qingpu address is an office. The English site serves a stripped test page; layer counts come from a TPCA directory.
Welgao Electronics (Ji'an)
Welgao's listed Jiangxi parent was formed in 2017, thirteen years after its Huizhou subsidiary that began the PCB business.
Xunjiexing (JXPCB)
Xunjiexing's site gives 2.8 million m2 a year, 2.6 million in an article, and 1.84 million when the four plants are added up one by one.
Yangzhou Elec & Eltek - Elec & Eltek / Kingboard
Yangzhou Elec & Eltek has four conflicting capacity figures spread across five or seven build phases, and only added HDI to the plant in 2025.
Zhaoqing Taihe Electronic
Taihe of Sihui was registered in 2016, but its UL and TS16949 record belongs to a 1992 Guangzhou predecessor. Three capacity figures disagree.
Zhejiang Leuchtek (Roche Tech)
Leuchtek stamps aluminium LED boards in Pan'an at 150,000 m2 a month. Its ISO certificates are withdrawn revisions and its own name appears three ways.
Zhuhai Access Semiconductor
Zhuhai Access builds IC substrates from 1.5 to 20 layers, converted to a joint stock company in 2012, with two shareholders telling different stories.
A rigid board is the shape a board has when nothing about it is unusual, so a list of factories that make one is a list of factories that all make the same product. What separates them is not size. It is which of three readings a capability line supports: the ceiling a press can reach, the window a line will run between, and the signature that makes two quotes the same product.
The same line, read three ways
Each pass reads one capability line from a real profile. The counts beside them are profiles out of 63 that publish that kind of number at all — measured at build time from the capability rows, not copied from a summary.
The largest figure the line will print, with no thickness, quantity or year attached to it.
Max board thickness 10 mm
A ceiling answers one question, "how big can you go", and it is a fact about a press. It is the first thing a capability page prints and the last thing a quote uses: your board is 1.6 mm, not 10 mm, and the press was never the constraint.
The two ends a line will actually run between, plus the tier — sample, volume, advanced — that each end belongs to.
Board thickness 0.3-5.0 mm
A window has a floor as well as a ceiling, and the floor is the half that decides whether a thin board is a normal order or a favour. One profile prints 0.3-5.0 mm beside a 0.1 mm minimum hole and a 16:1 aspect ratio; another prints a minimum core thickness that moves from 4 mil in mass production to 2.5 mil on a limited line.
The clause that makes two quotes the same product: acceptance class, warp limit, who signs the lot.
Acceptance class not printed
A capability page is a menu, not a commitment. The acceptance class is the line that turns a capability into a contract, and it is the line no profile in this directory prints. Without it two quotes are not quoting the same product, and the cheaper one is the one that assumed less testing.
Four of the highest numbers, and what each one is a number about
A leaderboard prints the left column and stops. The right column is on the same profile page, one row away, and it changes what the number means.
Huizhou Glorysky Electronics 惠州市特创电子科技股份有限公司
Huizhou (Huidong) · Huai'an · MalaysiaMaximum panel
1500 x 610 mm
The same row dates itself: 1200 x 610 mm in 2026, 1500 x 610 mm in 2027 and 2028. Board thickness runs the same way, 4.5 / 5.0 / 8.0 mm by year.
The widest panel in the directory is a 2028 panel. A job quoted this year is quoted off a 1200 mm press, and the 8 mm stack belongs to the same future column.
Putian Technology PCB (formerly GCI Jiesai) 中电科普天科技股份有限公司
Yunpu Industrial Zone, Guangzhou · Fushan Industrial Park, Doumen, ZhuhaiMaximum panel
1480 x 450 mm
That row is headed PCBA assembly limits, not board fabrication. The PCB side of the same profile states 40 design layers, a 22,000 m² plant and GJB 9001A certification.
The largest panel number on the page belongs to the assembly line. Copied into a bare-board RFQ it asks for a panel the etcher never offered.
Camelot Electronics (Qingyuan) 金禄电子科技股份有限公司
Qingyuan (Guangdong) · Anlu (Hubei) · Suining (Sichuan)Maximum panel, and where it applies
600 x 1180 mm
The same cell pairs it with 600 x 860 mm for volume, beside a CNC tolerance of ±0.05 mm for samples and ±0.1 mm for volume.
Two windows on one line, and the wider one is the sample window. A broker quoting the left-hand column is quoting a prototype build and calling it a price.
Chengzhiyi Circuit (Ji'an) 江西诚之益科技有限公司
Shenzhen · Dongguan · Ji'anBoard thickness
0.17-6 mm
The profile is filed under metal-based and aluminium as well as rigid, and its product scope opens with aluminium, copper and thermal-separated copper.
The thinnest board in the rigid set is not an FR-4 board. A 0.17 mm floor reached on aluminium does not transfer to the FR-4 stack in your drawing.
One table, three columns, nine moving rows
This is the clearest window in the directory: one factory, one table, and a column for each tier it will quote. Read the headings before the numbers. The left column is the line that runs every day; the right column is the line that runs on a good day, and it is the first one a capability page quotes.
HannStar Board Technology (Jiangyin) 瀚宇博德科技(江阴)有限公司
Jiangyin (Wuxi) · Guanyin (Taoyuan, Taiwan)
| Line | Mass production | Advanced | Limited |
|---|---|---|---|
| Layer count | 2-20 layers | 26 layers | 34 layers |
| Board thickness | 0.6 to 3.5 mm | 0.6 to 3.5 mm | 0.6 to 3.5 mm |
| Minimum core | 4 mil | 3 mil | 2.5 mil |
| Inner copper | 0.5 / 1 / 2 oz | 3 oz | 4 oz |
| Outer copper | 0.5 / 1 oz | 2 oz | 3 oz |
| Maximum shipping size | 495 x 571 mm | 506 x 598 mm | 506 x 621 mm |
| Trace and space at 0.5 oz inner | 3.5/3.5 mil | 3/3 mil | 2.5/2.5 mil |
| Plating aspect ratio | 10.5:1 | 12.5:1 | 20:1 |
| Back-drill stub | 7±5 mil | 6±4 mil | 5±3 mil |
| Impedance tolerance | ±10% | inner +8 / outer +10 | inner +7 / outer +10 |
Nine of these ten rows move between columns. The left column is the line that runs every day; the right column is the line that runs on a good day, and it is the first one a capability page quotes.
Quoted as published. Thickness is the one row the profile keeps identical across all three tiers.
Three numbers almost nobody prints
The record thins out exactly where a purchase order needs it to be thickest. These three are the lines that decide whether two quotes are the same product, and they are the lines a capability page almost never carries.
Acceptance class
No capability row in the rigid set names IPC-6012 Class 2 or Class 3. One profile lists "IPC-2/3" inside a certification row, which is a certificate, not the class the lot will be accepted against.
Warp or bow limit
One profile prints "warpage 0.5% or less", and it sits inside a row about high-frequency laminate, not in a general tolerance row. IPC-6012 caps bow and twist at 0.75% for boards carrying surface-mount devices and 1.5% otherwise; the standard sets a limit, the factory never states which one it works to.
Dynamic Electronics (Huangshi) 超颖电子电路股份有限公司(前身:定颖电子(黄石)有限公司)
Layer-to-layer registration
One profile prints ±50 µm, in the same row as 50/50 µm line and space. Registration is the number that decides whether a 6-layer stack with 0.1 mm vias is repeatable, and 61 profiles leave it unstated.
Dynamic Electronics (Huangshi) 超颖电子电路股份有限公司(前身:定颖电子(黄石)有限公司)
Dongguan Yuejie Circuit Technology 东莞市跃捷电路科技有限公司
Chang'an, Dongguan (registered) · Yanluo, Bao'an, Shenzhen (site contact)
- Up to 64 layers, 10 mm board thickness, 2/2 mil line and space, 0.1 mm vias and 10 oz heavy copper
- IPC-2/3, UL, RoHS, ISO 9001, IATF 16949, AS9100 and ISO 13485 in one certification list
- 99% sample on-time delivery, 24-hour quick turn, 2-hour quotation
- Founded 2012-05-10; USCC 91441900595831304L; RMB 10 m capital with RMB 977 k paid in
- 3 staff in 2024; 0 insured staff in the 2025 annual return
- Registered address is a room in a building on Chang’an Bieshu Street; three renames in its first two years
The two lists are not a contradiction and not a scandal: a 10 mm ceiling can be built on a line that a three-person company does not own. They are two different documents, and only one of them is written by process engineers. Ask which legal person will appear on the contract, and which plant the lot will be drilled in.
The four profiles that carry rigid alone
If a factory only makes plain rigid boards, this directory has not found one. The four profiles that carry the rigid tag without also carrying multilayer are plants whose main line is something else — and each one states which.
Single-sided first
Design capacity is 3,600,000 m² a year for single-sided board against 1,980,000 m² for double-sided and multilayer combined.
Punched LED board
Single-sided rigid board at 150,000 m² a month, LED boards on FR-4, CEM-3 and CEM-1, run on 30 presses from 80 to 200 tonnes.
Metal base first
Over 1,000,000 m² a year of metal-based board, with aluminium substrates in three thermal series from 1.0 to 8.0 W/mK.
Camera-module flex first
580 KK camera-module FPC shipments in 2024, about 18% of the China total by units, with two-stage HDI on the same site.
Tag counts as published in the profiles on 2026-11-13: 63 filed under rigid, 59 of them filed under multilayer as well.
Why a rigid PCB list cannot be a ranking
Rigid is a format, not a specialism. It is the shape a board has when nothing about it is unusual, which means every factory on a “top rigid PCB manufacturers” list already makes the same product, and the ranking is being asked to sort a category that nobody is outside of.
This directory shows the problem in one number. Of the 63 published profiles tagged rigid, 59 are also tagged multilayer. Only four carry rigid alone, and none of those four is a plant whose main line is multilayer: one is single-sided first, one punches LED board, one leads with metal base, one leads with camera-module flex. In other words, there is no such thing here as a factory that only makes plain rigid boards, because the plants that do make them also make something harder and file under that instead.
That is why this page is not ordered by size. The useful comparison is not between factories; it is between three ways of reading one line of a capability table. The same line, “max board thickness 10 mm”, is a fact about a press, a window into a process, or nothing at all, depending on what else the page says beside it.
One capability row, three readings
A ceiling is the largest figure a page will print, with no thickness, quantity or year attached. It answers “how big can you go”, and it is a fact about a press. It is the first thing a capability page publishes and the last thing a quote uses, because your board is 1.6 mm, not 10 mm, and the press was never the constraint.
A window is the two ends a line will actually run between, plus the tier each end belongs to. The floor matters as much as the ceiling: Camelot prints 0.3-5.0 mm board thickness beside a 0.1 mm minimum hole and a 16:1 plated through-hole aspect ratio, which is what makes a 0.6 mm board a normal order rather than a favour. The tier matters just as much: HannStarBoard Jiangyin runs nine parameters at three levels — mass production, advanced, limited — and the left column is the line that runs every day.
A signature is the clause that makes two quotes the same product: the acceptance class, the warp limit, the name of the entity that will appear on the contract. A capability page is a menu, not a commitment. The signature is the line that turns a menu into a contract, and it is the line this directory almost never records.
| The row | A ceiling looks like | A window looks like | A signature would read |
|---|---|---|---|
| Board thickness | Max 10 mm, from a plant whose registry entry lists three staff | 0.3-5.0 mm, with a 0.6 mm board treated as a normal order | Finished thickness to IPC-6012, plus the tolerance the press holds on your stack |
| Copper weight | 12 oz, on three different profiles, one calling it an Asian first | 2-12 oz across a family, tiered by line | Which of those ounces survives etching at your line width |
| Panel size | 1500 x 610 mm, dated 2027 | 600 x 1180 mm sample, 600 x 860 mm volume | The panel the lot will be stepped on, and the utilisation you pay for |
| Layer count | 64 layers, no condition attached | 14 standard and volume, 16 advanced | The count the plant that drills your vias runs every day |
| Minimum hole | 0.1 mm, one line | 0.20 mm mechanical, 0.15 mm advanced | Hole-to-copper registration at that diameter |
| Acceptance class | Not printed anywhere in the category | “IPC-2/3” inside a certificate list | IPC-6012 Class 2 or Class 3, named in the PO |
Ceilings arrive with a year, a sample or an assembly line attached
Four of the highest numbers in the rigid set, and where each one actually applies.
Glorysky Huizhou publishes a 1500 x 610 mm maximum panel. The same row dates it: 1200 x 610 mm in 2026, 1500 x 610 mm in 2027 and 2028. Board thickness runs the same way, 4.5, 5.0 and 8.0 mm by year. The widest panel in the directory is a 2028 panel, and the 8 mm stack is in the same future column.
Putian GCI Guangzhou prints 1480 x 450 mm, which looks like the largest board panel in the category until you read the row heading: PCBA assembly limits. The board side of the same profile states 40 design layers and a 22,000 m² plant. Copied into a bare-board RFQ, the biggest number on the page asks for a panel the etcher never offered.
Camelot puts two windows in one cell: 600 x 1180 mm maximum panel, 600 x 860 mm for volume, beside a CNC tolerance of ±0.05 mm for samples and ±0.1 mm for volume. The wider figure is the sample figure. A broker quoting the left-hand number is quoting a prototype build and calling it a price.
Chengzhiyi Ji’an prints the thinnest board in the rigid set, 0.17-6 mm, alongside 2-12 oz copper foil. But the same profile is filed under metal-based and aluminium, and its product scope opens with aluminium, copper and thermal-separated copper. A 0.17 mm floor reached on aluminium does not transfer to the FR-4 stack in a drawing.
A window has two ends, and usually a tier in the middle
The clearest window in the directory belongs to HannStarBoard Jiangyin: one table, three columns, mass production, advanced, limited, and nine of ten rows moving between them. Layer count goes 2-20, then 26, then 34. Minimum core goes 4 mil, 3 mil, 2.5 mil. Plating aspect ratio goes 10.5:1, 12.5:1, 20:1. Back-drill stub goes 7±5 mil, 6±4 mil, 5±3 mil. A list that copies the right-hand column has copied the column that accepts the fewest jobs.
Stariver Huangshi writes the same distinction in words rather than columns: 14 layers standard and volume, 16 as advanced capability; 0.20 mm minimum mechanical hole, 0.15 mm advanced; 8:1 aspect ratio, 10:1 advanced. Its 1016 x 610 mm panel is a single figure, because panel size is not tiered there.
Windows also move with the product family, not only with the tier. Jinhong Ji’an shows why a window is not a range: its board thickness window is 0.4-3.2 mm, and the same row lists the ten thicknesses it actually stocks, 0.4, 0.6, 0.8, 1.0, 1.2, 1.6, 2.0, 2.4, 3.0 and 3.2 mm. Outer copper is 1-6 oz with 1 oz named as the default and inner copper fixed at 0.5 oz. Its panel line carries three numbers at once, 580 x 550 mm maximum, 400 x 500 mm working panel, and 560 x 530 mm as the usual design envelope.
The three numbers almost nobody prints
The record thins out exactly where a purchase order would need it to be thickest.
No capability row in the rigid set names IPC-6012 Class 2 or Class 3. One profile lists “IPC-2/3” inside a certification row, which is a certificate, not the class a lot will be accepted against. Without that class, two quotes are not the same product: the cheaper one is the one that assumed less testing.
One profile prints a warp limit, Dynamic Huangshi, and it prints “warpage 0.5% or less” inside a row about high-frequency laminate rather than in a general tolerance row. IPC-6012 caps bow and twist at 0.75% for boards carrying surface-mount devices and 1.5% otherwise, so the standard sets a limit and the factory never says which one it works to.
One profile prints layer-to-layer registration, the same one, at ±50 µm beside 50/50 µm line and space. Registration is what decides whether a six-layer stack with 0.1 mm vias is repeatable, and 62 profiles leave it unstated.
The gap is not dishonesty, it is asymmetry. A ceiling can be copied from a machine datasheet. A signature has to be measured per lot, held against copper balance and press cycle, and defended when a customer rejects a panel.
What to put in the RFQ, and what to ask for in writing
Send the stack-up with the laminate named per layer, the drilled hole chart, the copper weight per layer, the surface finish, the panel you expect the board to be stepped on, and the acceptance class. Then add three lines that no capability page here will answer for you: the measured warp limit per lot, the layer-to-layer registration the plant holds, and the registered legal person that will appear on the contract.
The last line is not paperwork. Yuejie Dongguan publishes up to 64 layers, 10 mm board thickness, 10 oz heavy copper, and a certification list running from IPC-2/3 to AS9100 and ISO 13485. Its registry entry records three staff in 2024, no insured staff in the 2025 annual return, and RMB 977 k paid in against RMB 10 m of capital. A 10 mm ceiling can be built on a line the signing entity does not own; that is a reason to name the plant, not a reason to walk away.
The RFQ checklist lists the full package. How we verify explains what this directory can and cannot confirm before you send anything.
Rigid sourcing, answered from the records
- 01 Which Chinese factories make rigid PCBs?
-
In this directory, 63 published profiles carry the rigid tag, and every one of them names a registered Chinese legal person and at least one plant city. The tag on its own is not a specialism: 59 of the 63 are also filed under multilayer, because multilayer is where rigid volume actually sits. The 4 that carry rigid alone are single-sided, LED-board, metal-base and flex camera-module plants.
Aohong Electronics 常州澳弘电子股份有限公司
- 02 Should I shortlist the factory with the highest layer count?
-
No. A layer ceiling is a fact about a press, and the highest ceilings in the directory arrive with a condition: a 2028 column, a sample panel, or a speciality structure. The number that decides whether your board is buildable is the aspect ratio at your finished thickness, which 10 of the 63 print.
Huizhou Glorysky Electronics 惠州市特创电子科技股份有限公司
- 03 What is a process window on a PCB quote?
-
The two ends a line runs between, plus the tier each end belongs to. One profile prints 0.3-5.0 mm thickness, a 0.1 mm minimum hole and 16:1 aspect ratio on one table, and pairs a 600 x 1180 mm sample panel with a 600 x 860 mm volume panel in the next cell. A quote that gives only the wide end is quoting the sample build.
Camelot Electronics (Qingyuan) 金禄电子科技股份有限公司
- 04 Why does the acceptance class decide whether two quotes are comparable?
-
Because it sets how much testing and how many coupons the lot is accepted against. IPC-6012 Class 2 and Class 3 differ in annular ring, plating thickness and inspection sampling, so a quote written to Class 2 and a quote written to Class 3 are not the same product at two prices. None of the 63 rigid profiles states which class it builds to, so it has to be written into the RFQ.
HannStar Board Technology (Jiangyin) 瀚宇博德科技(江阴)有限公司
- 05 Is a 10 mm, 64-layer rigid board really available in China?
-
The ceiling is published, and the same company publishes IPC-2/3 and AS9100 beside it. The registry entry for that company records three staff in 2024 and no insured staff in the 2025 annual return, with RMB 977 k of its RMB 10 m capital paid in. A ceiling can be built on somebody else’s line; the contract has to name whose.
Dongguan Yuejie Circuit Technology 东莞市跃捷电路科技有限公司
- 06 Why does almost no factory publish its warp limit?
-
Because it is a property of the finished panel and it moves with copper balance, stack symmetry and press cycle, so it is easier to promise a number than to hold it per lot. One profile in the rigid set prints 0.5% or less, and it prints it in a row about high-frequency laminate. Ask for the measured value per lot, not the target.
Dynamic Electronics (Huangshi) 超颖电子电路股份有限公司(前身:定颖电子(黄石)有限公司)