Factory profile · Public sources reviewed

Aohong Electronics

常州澳弘电子股份有限公司 · Changzhou, Jiangsu · Founded 2005 · SSE 605058, listed 2020

Two thirds of Aohong capacity is single-sided, unusual in a directory of multilayer factories. Its 12-layer sample is the highest count it shows.

Aohong is the wrong supplier for a 20-layer board and one of the better ones for a single-sided or metal-base board at millions of square metres a year. Read the capacity split before the capability claim: 3.6 million of its 5.58 million m² of Chinese design capacity is single-sided.

Identity and record

Only entries that were checked against a source are shown. A blank field means we have not confirmed it, not that it does not exist.
Registered name (Chinese) 常州澳弘电子股份有限公司
Registered name (English) Changzhou Aohong Electronics Co., Ltd.
Founded 2005
Listed SSE 605058, listed 2020
Headquarters Changzhou, Jiangsu
Production sites Changzhou (Aohong: double-sided, multilayer, HDI) · Changzhou (Haihong: single-sided, thick copper, metal-base) · Chachoengsao, Thailand (trial production from July 2026)
Official website https://www.czaohong.com
Evidence levelPublic sources reviewed
Last reviewed2026-11-11
Registered entity and published production sites Registered entity Aohong Electronics and 3 named production sites, from the disclosures cited on this page. PUBLISHED RECORD Aohong Electronics 常州澳弘电子股份有限公司 Founded 2005 · SSE 605058, listed 2020 Changzhou Aohong: double-s… Changzhou Haihong: single-… Chachoengsao, … trial production… Source: disclosures cited on this page
Entity and footprint map. Aohong Electronics and the production sites named in the disclosures cited above.

The capacity split is the story

Aohong reports 5.58 million m² per year of Chinese design capacity at the end of 2025, and 3.6 million of that is single-sided. Double-sided and multilayer together get 1.98 million. The company’s own total, including Thailand, is stated as 7.6 million m².

Most factories in this directory are multilayer shops that also do simple boards. Aohong is closer to the reverse: a high-volume single-sided producer that also runs a multilayer and HDI operation. That changes who should be talking to it.

What that means for a buyer

If you are buying light bars, power supplies, appliance control boards or metal-base LED boards in hundreds of thousands of pieces, the single-sided economics here are hard to beat, and 80.28% utilisation on that line says there is still room. If you are buying a 12-layer control board with second-order HDI, you are in the other plant, at 91.41% utilisation, which is close to full.

The utilisation gap is worth thinking about. A line above 90% has less scheduling flexibility and less appetite for a small expedited order. The single-sided line has more headroom, which is where a new customer is more likely to be welcomed.

Twelve layers is a sample, not a ceiling

The product pages show a 12-layer board and first- and second-order HDI as examples. No maximum layer count is published anywhere.

That is a legitimate reason to be cautious. A sample gallery tells you what has been built, not what can be built repeatedly, and the difference is the whole point of a capability table. For anything above eight layers, ask for the process capability sheet with a revision date, and for the layer limit of the line that will run the order.

Two plants, two product worlds

Aohong makes double-sided, multilayer and HDI boards. Haihong makes single-sided boards and runs dedicated single-sided wet-film and thick-copper lines, including metal-base and light-bar boards. Thailand adds 1.2 million m² per year across all four families, with trial production from July 2026.

The thick-copper and metal-base lines are the ones that matter for power and lighting customers, and they are in a separate legal entity. If your board is metal-base, the contract may sit with Haihong rather than with the listed company.

A company that started in 1973

The corporate history begins in 1973 as a commune label factory, with single-sided PCB production from 1982 supplying Huanghe TV. That makes it one of the older board businesses in China, and it explains the product mix: single-sided work for consumer appliances, built up before multilayer became the default.

Where the numbers do not reconcile

The official total of 7.6 million m² per year does not equal the disclosed Chinese design capacity of 5.58 million plus 1.2 million in Thailand, which is 6.78 million. There is a gap of about 0.8 million m² and no published bridge for it.

It might be a nameplate figure from a different date, or an allowance for a further phase. Ask which number applies to the current year before you plan capacity around it.

How to use this profile

For single-sided and metal-base work, send the panel drawing, the copper weight, the finish and the annual quantity, and ask for the Haihong line specifically. For multilayer or HDI, ask for the layer limit and the capability sheet, and expect a smaller supplier than the capacity figures suggest.

Ask which entity contracts in each case, and for the IATF certificate that covers the site and the product family. The annual report names the systems but not the sites they cover, and AS9100D on a single-sided plant is a claim worth checking rather than assuming.

What is not established

No UL file number is published. No maximum layer count, minimum line width, minimum drill or panel size is published. Capacity after the Thai plant reaches volume is not restated anywhere. There is no per-plant capacity in square metres per month, only annual design capacity split by product family.

Published limits

Every value below is quoted as published by the company or a public record.

ParameterValue as published
Total production capacity, all bases 7,600,000 m² per year
Design capacity, China, end-2025 5,580,000 m² per year
Single-sided design capacity 3,600,000 m² per year
Double-sided and multilayer design capacity 1,980,000 m² per year
HDI build-up in published samples First-order and second-order
Highest layer count in published samples 12 layers
Thick copper and metal-base lines Dedicated single-sided wet-film and thick-copper lines at Haihong, including metal-base and light-bar boards
Material and finish in samples Tg150 laminate; ENIG, HASL, OSP and immersion tin
2025 capacity utilisation Single-sided 80.28%; double-sided and multilayer 91.41%

Certifications on record

A certificate covers a legal entity and a site, not a brand. Scope and expiry are recorded where published.

StandardWhat the record shows
IATF 16949 Named in the 2025 annual report; no number or site scope
AS9100D Named in the 2025 annual report as an aerospace system held
ISO 9001 Named in the annual report
ISO 14001 and ISO 45001 Named in the annual report

Ask this factory for a quote

Send one technical package and compare the replies. The RFQ checklist lists what to include; the quote specifications say which parameters change the price for the process you are buying.

Request a quote

Source and review conventions are described in how we verify. Corrections can be sent through the contact channel.