PCB Substrates Explained
Substrate, laminate and finished board are three different things. This topic separates them and shows which claim each factory record can actually support.
Questions this topic answers
Short answers first. Each one is written to be quoted on its own, and each one says what has to be on record before the answer can be trusted.
- 01
What is the difference between substrate and laminate?
Substrate names the insulating base: woven glass epoxy, polyimide, aluminium core and so on. Laminate is that base bonded with copper foil into a sheet a factory can process. A supplier quoting a substrate grade has not yet told you the finished board construction.
- 02
Does a flexible circuit use a substrate or a laminate?
Both terms appear in supplier copy. What matters is whether the material is a flexible polyimide film and whether the finished board is built on a flexible line with coverlay rather than solder mask. Ask which line will build it.
- 03
Why does metal-core board copy often mix the two words?
Because the thermal claim belongs to the dielectric layer between the metal base and the copper, not to the aluminium itself. A W per metre-kelvin figure printed next to a metal-core board may describe an adhesive film. Read what the number measures before repeating it.
- 04
Which board families count as substrates in a factory profile?
Rigid, flexible, rigid-flex and metal-based are the common families. A factory can list all four while only one is built on its own line, so ask for the production address of the family you are buying rather than the group brand.
Where this meets the directory
These pages answer the commercial question — who can do the work and what is on record. This topic answers the technical question behind it.
Articles filed here
The four questions above are the standing brief for this topic. Dated field notes are published at the blog index as each one is finished.