Blog topic · 09 / 16

PCB Repair Explained

Rework and repair questions: what can be repaired, what must be scrapped, and which records need to follow a board that has been touched after first pass.

A repaired board needs a record, not a photograph. The question is whether the repair is allowed by your acceptance criteria and whether the touched area was inspected afterwards.

Questions this topic answers

Short answers first. Each one is written to be quoted on its own, and each one says what has to be on record before the answer can be trusted.

  1. 01

    When is rework acceptable and when should a board be scrapped?

    That is a decision for your acceptance document, not the factory. Define which repairs are permitted, how many times a site may be touched and whether a repaired board needs a second full inspection. Without that definition, two factories will make different calls on the same defect.

  2. 02

    What record should follow a repaired board?

    The defect, the method, the operator or station, the reinspection result and the lot number. A brief note on the traveller is enough if it can be traced. A verbal assurance after delivery cannot be audited.

  3. 03

    Does rework on a bare board differ from rework on an assembly?

    Yes. Bare-board repair usually concerns plating or a surface defect, while assembly rework touches solder joints and components and introduces heat cycles. The second can affect reliability in a way a visual check will not show, so define the thermal limit in advance.

  4. 04

    Will a repair show up in the price?

    Often as an allowance rather than a line item. Ask how rework is priced and whether the rate covers only first-pass defects or also damage caused during handling. The distinction matters when a supplier has an incentive to classify the second as the first.

Where this meets the directory

These pages answer the commercial question — who can do the work and what is on record. This topic answers the technical question behind it.

Articles filed here

The four questions above are the standing brief for this topic. Dated field notes are published at the blog index as each one is finished.