PCB Materials Explained
Material claims checked against records: laminate grade, copper weight, solder mask and finish, and the gap between a brand name and a board construction.
Questions this topic answers
Short answers first. Each one is written to be quoted on its own, and each one says what has to be on record before the answer can be trusted.
- 01
What should a material specification state?
Laminate grade and maker, core and prepreg thickness, copper weight per layer, solder mask type and surface finish. A brand name alone leaves the grade open, and the grade is what carries the electrical and thermal behaviour you are paying for.
- 02
Can a factory substitute the laminate without telling me?
A factory should not, but substitutions happen when a grade is out of stock. Put the approved grade and the written approval step in the purchase order. Without that clause you may receive an equivalent grade with a different Dk or Tg and no record of the change.
- 03
Is a high Tg value enough to choose a material?
No. Tg is one transition point and says nothing by itself about decomposition temperature, thermal expansion or how long the laminate survives repeated reflow. Ask for the full data sheet of the exact grade and confirm the number is a published value rather than a website claim.
- 04
How do I check a material claim on an existing record?
Look for the grade in a purchase record, a coupon log or a cross-section note tied to a production lot. A marketing page that mentions the same brand proves the shop bought it at some point, not that your board used it.
Where this meets the directory
These pages answer the commercial question — who can do the work and what is on record. This topic answers the technical question behind it.
Articles filed here
-
PDN resistance: the half of R that the fab decides
Seven CAD techniques lower PDN resistance. In 131 published factory records, not one names the finished copper thickness those techniques assume.