PCB Basics Explained
First-order vocabulary for a first board order: layers, stackup, finish, solder mask, drill range and the few fields that actually change a quotation.
Questions this topic answers
Short answers first. Each one is written to be quoted on its own, and each one says what has to be on record before the answer can be trusted.
- 01
Which six fields do I need before I ask for a price?
Layer count, finished thickness, copper weight on each layer, surface finish, smallest drill and quantity. Add the board outline and whether the panel needs to be shared. A quote built on fewer fields is an estimate that will be revised after your design reaches CAM.
- 02
What is a stackup and why does a factory ask for one?
A stackup is the order of copper, core and prepreg layers through the board. It decides thickness, impedance and how the board moves in heat. For controlled impedance or more than four layers, ask the factory to confirm its proposed stackup before tooling.
- 03
Does a heavier copper weight cost more?
Usually, because it changes laminate choice, etch time and the minimum trace the line can hold. One ounce is the common starting point. State the copper weight on each layer rather than one number for the whole board, because inner and outer layers are often different.
- 04
What is the difference between solder mask and surface finish?
Solder mask is the insulating coating that leaves pads exposed. Surface finish is the metal layer on those exposed pads that keeps them solderable. A green board can carry several different finishes, so specifying the mask colour says nothing about the finish.
Where this meets the directory
These pages answer the commercial question — who can do the work and what is on record. This topic answers the technical question behind it.
Articles filed here
The four questions above are the standing brief for this topic. Dated field notes are published at the blog index as each one is finished.