Solder Explained
Solder as a material: alloy choice, paste storage, shelf life and low-alpha claims, separated from the process questions that belong under soldering.
Questions this topic answers
Short answers first. Each one is written to be quoted on its own, and each one says what has to be on record before the answer can be trusted.
- 01
What should I specify for solder paste in an RFQ?
Alloy, powder size, flux classification and whether the assembler or you supply it. Two pastes with the same alloy can print and reflow differently, so an alloy name alone does not make two assembly quotes comparable.
- 02
Why does paste storage matter?
Paste has a shelf life and a limited floor life once the jar is opened. Flux activity changes with temperature and age, which shows up as poor wetting or solder balls rather than as an obvious expiry date. Ask how the assembler tracks opening time.
- 03
What does a low-alpha claim require?
A measurement from the material supplier tied to the specific lot, not a general statement about the alloy. For sensitive devices, ask for the certificate and confirm the unit and test method. The claim is only useful if it can be matched to your lot.
- 04
Can the same alloy be used for rework?
Often, but the flux and powder size may differ from the production paste. Mixing the two in one joint changes the reflow behaviour. Ask what the rework station uses and how it records the material when you are qualifying a supplier.
Where this meets the directory
These pages answer the commercial question — who can do the work and what is on record. This topic answers the technical question behind it.
Articles filed here
The four questions above are the standing brief for this topic. Dated field notes are published at the blog index as each one is finished.