Blog topic · 10 / 16

PCB Stencils Explained

Stencil questions that change paste deposit: aperture design, thickness, stepped stencils and coatings, with the checks that belong in an assembly RFQ.

The stencil is a process tool, not a consumable detail. Aperture area ratio, thickness and release coating decide how much paste lands on each pad before the reflow profile matters.

Questions this topic answers

Short answers first. Each one is written to be quoted on its own, and each one says what has to be on record before the answer can be trusted.

  1. 01

    What stencil details should be agreed before production?

    Thickness, aperture reduction or enlargement, nano-coating, frame or frameless mounting and whether one design needs a stepped stencil. Agree them with the assembler rather than a separate vendor, because the operator has to mount and clean it.

  2. 02

    When is a stepped stencil worth the cost?

    When the same board has fine-pitch parts next to large thermal pads that need much more solder. A single thickness either starves the large pads or floods the fine ones. A step solves that at the tool stage instead of through repeated profile tuning.

  3. 03

    Does a nano-coating remove the need for cleaning?

    No. It improves paste release and extends the interval between cleans, but it does not remove residue. Ask for the cleaning interval and how the coating is inspected, because a worn coating produces defects that look like a placement problem.

  4. 04

    Who owns the stencil design file?

    It should be generated from your board data and kept with the production package. If the factory owns it and changes an aperture between orders, your second lot will not match the first and you may not be told why.

Where this meets the directory

These pages answer the commercial question — who can do the work and what is on record. This topic answers the technical question behind it.

Articles filed here

The four questions above are the standing brief for this topic. Dated field notes are published at the blog index as each one is finished.