Factory profile · Public sources reviewed

Kunshan Huaxin Electronics Group

昆山华新电子集团有限公司 · Kunshan, Jiangsu · Founded 1993 · Not listed

A private Kunshan group claiming 2.2 or 2.6 million m2 a year, 2,200 or 2,300 staff and three addresses. Its certificates are editions withdrawn before 2010.

A volume producer of 6- to 16-layer rigid boards, low-order HDI, rigid-flex and LED aluminium, priced for appliance and automotive work. Nothing numeric is published on process capability, and the certificates shown are withdrawn editions, so qualification has to start from samples.

Identity and record

Only entries that were checked against a source are shown. A blank field means we have not confirmed it, not that it does not exist.
Registered name (Chinese) 昆山华新电子集团有限公司
Registered name (English) Kunshan Huaxin Electronics Group Co., Ltd.
Founded 1993
Listed Not listed
Headquarters Kunshan, Jiangsu
Production sites Kunshan (Qiandeng - Huaxin, Huaxing, Huashen plants)
Official website http://www.kshuaxin.com.cn/
Evidence levelPublic sources reviewed
Last reviewed2026-11-11
Registered entity and published production sites Registered entity Kunshan Huaxin Electronics Group and 1 named production sites, from the disclosures cited on this page. PUBLISHED RECORD Kunshan Huaxin Electronics Group 昆山华新电子集团有限公司 Founded 1993 · Not listed Kunshan Qiandeng - Huaxi… Source: disclosures cited on this page
Entity and footprint map. Kunshan Huaxin Electronics Group and the production sites named in the disclosures cited above.

Two output numbers, neither dated

Open the group’s about page and it says 2.2 million m² of PCB a year. Open the homepage and it says 2.6 million. Both are unattributed to any plant, year or product mix, and both are printed in the present tense on a site that has not been re-edited in a coherent pass.

The gap is 400,000 m², roughly the output of a mid-sized board factory. It could be an expansion that reached the homepage but never the about page, or a rounded figure that grew in the retelling. The site does not say, and no filing exists to arbitrate because this is a private group.

Headcount repeats the pattern at a smaller scale: 2,200 on the about page, 2,300-plus on the homepage. Registered capital splits much wider — RMB 97.6 million on the about page against RMB 20 million for the group entity registered on 2009-07-23.

Three addresses, one brand

The about page places the company in the Qiandeng private PCB park. The site footer gives No. 301 Hongyang Road. A registry summary gives No. 686 Qinfeng South Road. Three addresses, one wordmark, no map that reconciles them.

For a supplier audit this is not a trivial inconsistency. You need to know which gate the auditors will walk through, and whether the answer is a registered office, a sales office or a production zone. Qiandeng is where the plants are described as sitting; the other two are administrative strings.

The group is a holding company over older factories

Production began in April 1993 in Qiandeng. The holding company, 昆山华新电子集团有限公司, was registered on 2009-07-23. Between those dates sits the actual business: 昆山市华新电路板公司, 昆山市华兴线路板有限公司 and 江苏华神电子有限公司, organised as two manufacturing zones, three companies, six factories and one machining centre.

So “founded 1993” is the plant’s history and “registered 2009” is the entity’s age. Both are true. A vendor form that asks for years in business will get one answer and a credit report will show another, and neither is wrong.

What the catalogue will tell you

The product pages are specific where the corporate pages are vague. Multilayer runs 6, 8 and 16 layers. HDI is 1st-, 2nd- and 3rd-order on 6-, 8- and 10-layer builds. Rigid-flex is 2, 4 and 6 layers. Aluminium covers single-sided and double-sided LED boards. The site is 220,000 m² of land and 160,000 m² of buildings.

That is a mainstream appliance-and-automotive portfolio. No layer count above 16 appears, and the HDI description stops at third-order, which places the plant in the volume HDI tier rather than the fine-line tier.

Certificates from another decade

ISO 9001 is printed as ISO 9001-2000. That edition was replaced in 2008. QS 9000, listed alongside it, was superseded in 2002 and replaced by ISO/TS 16949, which was itself replaced by IATF 16949. The site shows none of the successors.

UL is claimed as a product mark with no file number and no holder name, which leaves open which laminate and which marking the file actually covers. GB, IPC and MIL compliance are asserted together, without a test report or a scope.

None of this proves the factory lacks current certificates. Chinese plants routinely hold valid certificates and leave a 2009-era compliance page untouched. It does mean the compliance section cannot be used as evidence, and automotive work claimed under QS 9000 needs an IATF certificate produced on request.

The claims a buyer can check

Named customers on the site are Haier, Hisense, BenQ, Xiaomi, BYD and Dell — consumer and appliance brands, consistent with the board mix. The company also states its boards went into the Shenzhou spacecraft and the J-10 programme, which is a heritage claim about defence and aerospace work rather than a current qualification.

What is verifiable is that the plant is running: the group held its 2026 Q2 safety committee meeting on 2026-07-22.

Where this factory fits

Sixteen-layer rigid, low-order HDI, rigid-flex up to six layers and LED aluminium at volume, for appliance, lighting and automotive customers who qualify by sample rather than by document. Lead with a stack-up and a monthly volume, and expect the quote to be competitive on price rather than on published capability.

What has to be asked, not read

Line and space, via diameter, copper weight, maximum layer count and panel size are absent from the entire site — there is no process table anywhere. Also unpublished: the credit code, any certificate number, actual output, and which of the six factories would build a given order.

Published limits

Every value below is quoted as published by the company or a public record.

ParameterValue as published
Annual PCB output, about page 2.2 million m²/yr; the homepage states 2.6 million m²/yr
Plant area and buildings 220,000 m² of land, 160,000 m² of buildings
Employees 2,200 on the about page; 2,300+ on the homepage
Group structure 2 manufacturing zones, 3 companies, 6 factories, 1 machining centre
Registered capital, as stated on the site RMB 97.6 million
HDI boards in catalogue 1st-, 2nd- and 3rd-order HDI on 6-, 8- and 10-layer builds
Rigid-flex builds in catalogue 2-, 4- and 6-layer rigid-flex
Multilayer range in catalogue 6-, 8- and 16-layer rigid boards
Aluminium-based boards in catalogue Single-layer and double-sided LED aluminium boards

Certifications on record

A certificate covers a legal entity and a site, not a brand. Scope and expiry are recorded where published.

StandardWhat the record shows
UL Product-level US UL safety mark claimed; no UL file number or holder name published.
ISO 9001 Listed as ISO 9001-2000, an edition withdrawn in 2008; no current certificate shown.
ISO 14001 Named without certificate number, scope or validity dates.
QS 9000 Legacy automotive standard superseded in 2002; still listed instead of IATF 16949.
GB / IPC / MIL compliance Claims compliance with GB, UL, IPC, MIL and national military standards; no test reports or scope given.

Ask this factory for a quote

Send one technical package and compare the replies. The RFQ checklist lists what to include; the quote specifications say which parameters change the price for the process you are buying.

Request a quote

Source and review conventions are described in how we verify. Corrections can be sent through the contact channel.