Nan Ya PCB (Kunshan)
南亚电路板(昆山)有限公司 · Kunshan, Jiangsu · Founded 2000 · Not listed; 100% held by Nan Ya PCB (Hong Kong)
Nanya's Kunshan entity has 3,931 staff and USD 275.8m in capital, but its 2026 equipment filing says total output stays unchanged.
Nanya Kunshan is a large, wholly foreign-owned board and substrate maker with a solid registry record. Its capacity story comes from a 2026 equipment permit, not a product page, and that permit says output will not rise. Good for HDI and substrate enquiries; get plant-specific documents rather than relying on the group brand.
Identity and record
| Registered name (Chinese) | 南亚电路板(昆山)有限公司 |
|---|---|
| Founded | 2000 |
| Listed | Not listed; 100% held by Nan Ya PCB (Hong Kong) |
| Headquarters | Kunshan, Jiangsu |
| Production sites | Kunshan (Jiangsu) |
| Unified social credit code | 913205837222615876 |
| Official website | https://www.nanyapcb.com.tw/ |
| Evidence level | Public sources reviewed |
| Last reviewed | 2026-11-11 |
One legal person, three jurisdictions in the paperwork
The entity on the quotation would be 南亚电路板(昆山)有限公司, incorporated on 7 August 2000 in Kunshan with USD 275.8m of registered capital, 3,931 employees and a business term running to 2050. Its sole shareholder is Nan Ya PCB (Hong Kong) Limited, and its company type is recorded as a legal-person sole proprietorship from Taiwan, Hong Kong and Macao, China. The registered address is No. 201 Changjiang South Road in the Kunshan development zone.
The public website attached to the registry record is a group domain using the .tw suffix, attributed to the group’s operations in Taiwan, China, and the registry labels that site with a different company name again. None of this is unusual for a multinational group, but it means a buyer has to be precise about which entity owns the line. Group-level process claims are not the same thing as what this Kunshan licence covers.
The useful capacity document is a permit
There is no published capability table with layer counts, minimum traces or monthly square metres in the sources reviewed here. The most specific recent statement about the plant is instead an administrative permit recorded on 29 September 2026. It describes buying roughly 148 units of equipment, including laser drills, edge-burnishing machines and direct-imaging exposure units, to replace older drills on networking-grade high-density package substrate and BGA substrate lines.
The permit then says something buyers rarely see in a supplier brochure: after the retrofit, total processing area stays the same and capacity does not increase. Raw materials are purchased externally, and energy, safety, environmental and fire approvals are to be completed before work starts. So this is an efficiency and quality project on substrate lines, not additional output you can book.
Brand range versus this plant
A business registry profile describes the group’s range as conventional PCBs, HDI, rigid-flex boards, ABF substrates and PP substrates. The Kunshan licence itself names high-precision circuit boards including flexible types, BGA ball-grid components and flip-chip package substrates. Those two lists overlap but are not identical, and neither gives a volume or a layer ceiling for a specific building.
If your part is an FPC or a flip-chip substrate, ask for the capability sheet tied to the Changjiang South Road site: line count, panel size, layer range, laser-drill minimum and whether the part will run on the lines named in the 2026 permit. A brand catalogue cannot answer that, and the retrofit filing explicitly concerns substrate lines rather than the whole factory.
Another industry code that needs reading past
The registry puts the company in industry code 397, electronic device manufacturing, while the licence text is about printed circuit boards and package substrates. A separate registry profile labels it as printed circuit board manufacturing. This is the same mismatch seen at several other Chinese board makers on this site: the statistical bucket is chosen from a classification list and is a poor way to decide whether a supplier is a real factory.
The stronger signals here are the 3,931 insured employees, USD 275.8m paid-in capital, the industrial-zone address, the specific production scope and the equipment permit. Those are the fields a supplier file should carry.
What to ask for before qualification
- A current business licence naming the Kunshan entity and its present legal representative, changed in June 2025.
- The UL file or equivalent product approval with the holder name and site address, not just a count of certificates.
- A dated capability sheet for the substrate lines covered by the September 2026 retrofit.
- Confirmation of which processes are in-house, since the permit says raw materials are externally purchased.
- The current status of the retrofit, which is a permit to proceed rather than a completion report.
What is not established
- No maximum layer count, minimum feature size or monthly capacity for the Kunshan plant was located.
- No certificate numbers, holders or scopes were found, only aggregate counts in a commercial database.
- The relationship between the group’s product range and this site’s actual lines is unconfirmed.
- Whether the 2026 retrofit has been commissioned was not stated in these sources.
- Customer names and qualification status were not published in the material reviewed.
Published limits
Every value below is quoted as published by the company or a public record.
| Parameter | Value as published |
|---|---|
| Registry basics for the Kunshan entity | Incorporated 2000-08-07; USD 275.8m capital; 3,931 staff; USCC 913205837222615876 |
| Ownership and entity type | Wholly owned by Nan Ya PCB (Hong Kong); Taiwan, Hong Kong and Macao legal-person sole ownership |
| Licensed product scope | High-precision boards including flexible types, BGA components and flip-chip package substrates |
| Statistical category against scope | Industry code 397 electronic device manufacturing, while the licence names PCBs and substrates |
| Capital increases and representative change | USD 156.8m to 204.8m in 2019, to 275.8m in 2022; representative changed in 2025-06 |
| Product range described in a business profile | Conventional PCBs, HDI, rigid-flex, ABF substrates and PP substrates |
| Revenue and intellectual property | RMB 4.0bn revenue in 2022; 36 patent records; 18 qualification certificates |
| September 2026 technical retrofit permit | About 148 laser drills, edge trimmers and direct-imaging units; total processing area unchanged |
| Explicit no-capacity-increase condition | The permit states the retrofit improves efficiency and quality and does not add capacity |
Certifications on record
A certificate covers a legal entity and a site, not a brand. Scope and expiry are recorded where published.
| Standard | What the record shows |
|---|---|
| Certificate count, no numbers | A business profile reports 18 qualification certificates and 20 administrative permits without listing any UL file or certificate holder. |
Ask this factory for a quote
Send one technical package and compare the replies. The RFQ checklist lists what to include; the quote specifications say which parameters change the price for the process you are buying.
Source and review conventions are described in how we verify. Corrections can be sent through the contact channel.