City cluster

PCB manufacturers in Changzhou

Changzhou's electronics industry is built on power conversion and energy storage, so its board work is thick copper, metal-backed and busbar-adjacent rather than fine-line.

Cluster notes reviewed 2026-11-11. Factory records below carry their own evidence level and review date.

A board industry shaped by batteries and solar

Changzhou is one of China’s centres for lithium battery manufacturing and photovoltaic equipment, and both industries buy boards that look nothing like a handset motherboard. They want current-carrying copper, thermal paths, large panels and mechanical robustness. Fine lines and high layer counts are someone else’s market.

That is not a limitation, it is a specialisation, and it decides which suppliers here are worth contacting. A Changzhou shop that has spent a decade building 4 oz copper on 2 mm aluminium will do a better job on a motor-drive board than a Shenzhen HDI plant, at a lower price, and it will understand the thermal requirement without being taught it.

Where the work sits

Area Industrial base Board work it drives
Xinbei Automotive and electronics, port access Control boards, power electronics, some rigid multilayer
Wujin Broad manufacturing, established electronics Thick copper, metal-core, industrial control
Jintan Battery cell and material manufacturing Busbar assemblies, sampling boards, cell connection systems
Liyang Large-scale battery plants Power and interconnect assemblies for packs

The battery cluster is the reason this city appears in a PCB directory at all. A modern battery pack contains cell connection systems — laminated busbars with integrated voltage and temperature sensing — which are made with flexible circuit and heavy-copper processes. Several manufacturers here treat that product as their main line rather than as an odd job.

The product most buyers do not know to ask for

A cell connection system, often called a CCS or integrated busbar, is a flexible laminate with heavy copper traces bonded to a plastic carrier, with sensing tabs and a connector. It replaces a wiring harness and a set of separate busbars.

It is not a printed circuit board in the conventional sense, but it is made by companies with PCB and flex capability, and sourcing it well requires the same discipline: material qualification, current-carrying cross-section, thermal cycling, and a clear specification of the insulation and adhesive system.

If your programme involves a battery pack, the questions are:

  • What copper thickness and what cross-section is required for the continuous and peak current?
  • Which insulation film, at what thickness, and what is the dielectric withstand?
  • How is the sensing circuit routed, and is it fused?
  • What is the temperature class, and how was the adhesive qualified for it?
  • How is the part tested — 100 percent electrical, or sampled?

A supplier that answers these with a PCB datasheet has not made one before.

Where sourcing goes wrong

  • Asking for HDI in a power cluster. The lines are not there. You will get a brokered quote with a broker’s margin and no process control.
  • Specifying copper by weight only. Ounces per square foot says nothing about cross-section after etching and plating. For current-carrying traces, specify the finished cross-section and the allowable temperature rise.
  • Treating a CCS as a wiring harness. It is a qualified electrical component with a thermal and insulation specification, and it needs to be sourced as one.
  • Ignoring the aluminium base thickness. On metal-core boards, 1.0 mm and 1.6 mm behave differently under thermal cycling and under mechanical stress; the cheap option is not always the thin one.
  • Assuming solar and battery quality systems are the same. They are different customers with different acceptance criteria; ask which one the line is set up for.

What we check before listing a factory in Changzhou

  • The product families the site actually runs: heavy copper, metal-core, flex, CCS, or conventional rigid.
  • Finished copper cross-section capability, and whether plating thickness is controlled on the inner layers as well as the surface.
  • Thermal qualification data on a comparable build, not a material datasheet.
  • For CCS work: insulation system, fusing of sensing lines, and the test method.
  • Pollutant discharge permit and the park, as with every Jiangsu site.

Getting there

Changzhou has a domestic airport and a high-speed rail station on the Shanghai-Nanjing line, roughly an hour from Shanghai and 40 minutes from Nanjing. The industrial districts are spread out, and a visit covering both Wujin and Jintan needs a full day.

Related: Jiangsu as a cluster, metal-based boards for the thermal stack-ups used here, heavy copper in multilayer boards, and rigid-flex for the sensing side of a battery assembly.

Changzhou: recorded factories

Ordered by evidence strength, then by most recent review. Each profile states what was checked, on what date, and which processes are subcontracted rather than performed on site. A listing is not a guarantee of factory ownership or certification validity.

Aohong Electronics

常州澳弘电子股份有限公司

Two thirds of Aohong capacity is single-sided, unusual in a directory of multilayer factories. Its 12-layer sample is the highest count it shows.

Changzhou rigidmetal based

Founded 2005 · Evidence: Public sources reviewed · Reviewed 2026-11-11

View factory profile

Jiangsu Xiehe Electronics

江苏协和电子股份有限公司

The same 2025 turnover appears as RMB 979 million in Chinese and USD 145 million in English; audited FY2024 was RMB 853.5 million on 1.15 million m2.

Changzhou rigidmultilayer

Founded 2000 · Evidence: Public sources reviewed · Reviewed 2026-11-11

View factory profile