City cluster

PCB manufacturers in Wuxi

The Wuxi area's two documented board plants are legally unrelated foreign subsidiaries — one Japanese, one Taiwanese — and neither publishes a capacity figure that can be used without naming the reporting basis.

Cluster notes reviewed 2026-11-11. Factory records below carry their own evidence level and review date.

Two plants, two parent systems, no shared specification

The two Wuxi-area plants are documented here as a working reference. Two factories is not enough to describe an industry belt, and a thin location page is exactly the kind of near-empty category page that adds nothing for a buyer. The material below is retained as working reference for the two records that do exist.

The two plants are unrelated. CMK Electronics (Wuxi) is the Chinese subsidiary of CMK Corporation of Tokyo, founded in 1961 and listed in Japan; the Wuxi company obtained its operating licence in May 2001 and sits in plot 65-A of the Wuxi National Hi-Tech Industrial Development Zone on a 50,000 m² site with 30,000 m² of buildings and registered capital of USD 64.875 million. HannStar Board Tech. (Jiangyin) was set up in 2002 by HannStar Board Corporation (TWSE 5469, part of the Walsin Lihwa group), with its first plant in mass production in March 2003; the Jiangyin base is described as the group’s largest production site.

CMK Wuxi HannStar Board Jiangyin
Chinese legal entity 希门凯电子(无锡)有限公司 瀚宇博德科技(江阴)有限公司
Parent CMK Corporation, Tokyo HannStar Board, TWSE 5469
Main product Automotive HDI, build-up structures Notebook, server, networking, TV and set-top-box boards
Published layers Through-hole 10-layer, 1-2-1 and 1-4-1 build-ups with buried via plating 2–20 mass production, 26 advanced, 34 limited
Published thickness Not stated as a plant-level range 0.6–3.5 mm; 4 mil core mass production, 3 mil advanced, 2.5 mil limited
Other Chinese entity under the same brand 旗利得电子(东莞)有限公司, a separate legal person Guan-yin plant in Taiwan; Jingcheng and ELNA in the group

The practical point of the last row is that a brand is not a contracting party. CMK’s Dongguan company and Wuxi company are different legal persons, so an audit of one says nothing about the other. The same caution applies to process tables: HannStar’s capability page separates the Guan-yin and Jiangyin plants with tabs, but the extracted table did not carry a plant label, which means the 34-layer figure — already marked “limited” rather than mass production — cannot be assigned to Jiangyin on the strength of that page alone. Its own company introduction says “double-sided to thirty layers”, a third figure that does not match the 20/26/34 tiering.

Neither capacity statement survives a direct reading

A 2023 exhibition article gives CMK Wuxi 36,000 m² per month, while the environmental filing for a technical upgrade states 480,000 m² per year, about 40,000 per month. The bases are different, and headcount appears as 670, about 700, or 528 permanent plus 117 temporary depending on whether the source is a trade article, a news report or a BSI record. Its IATF 16949 registration covers PCB manufacture only and does not extend to SMT.

For HannStar Jiangyin, a 5.5 million square feet per month figure belongs to the Jiangyin site, while 11 million square feet per month is a group figure that includes Jingcheng and ELNA. They cannot be added, substituted for one another or used to infer utilisation. The parent’s Hong Kong listing in October 2006 and December 2011 delisting are sometimes cited as evidence of current corporate structure; the surviving listed entity is the Taiwanese one, so a filing check should be directed there.

Why nearby plants are on the provincial page instead

Three other Jiangsu factories verified in the same pass are not listed here. Yangzhou Elec & Eltek sits in Yizheng, Yuantai in Jiangyan and Hehong in Dongtai; none of those places has a city page in this directory, so their profiles are filed under Jiangsu and their pages say so explicitly. Jiangyin is administratively a county-level city under Wuxi and is included on this page for that reason, but the factory’s own materials use “Jiangyin” as the address, and any document request should use the address the legal entity is registered at rather than the grouping on a directory page. Grouping is a navigation decision, not a statement about a factory’s jurisdiction.

A related example: the Tripod plant in Wuxi is also filed only at provincial level, because its profile was verified before this page existed and its public record does not support a city-level claim. That could be revisited, but changing a published profile’s geography without a matching change to its evidence trail would create exactly the inconsistency this directory is meant to surface.

What an RFQ to either plant should pin down

  • The legal entity name in Chinese, exactly as registered, and the address on its environmental approval.
  • Whether the quoted layer count is mass production, advanced or limited, and at which plant the stack was qualified.
  • The reporting basis for any capacity figure: per month or per year, single site or group consolidated, designed or actual.
  • For automotive work, the exact scope of the IATF certificate and whether assembly is inside it.
  • Which sales channel the order passes through. CMK Wuxi’s published sales routes are Japan and Hong Kong, with no disclosed share of direct mainland sales.

For the wider Jiangsu picture, including Suzhou, Kunshan and Changzhou, see the Jiangsu page. For the board families involved see HDI and multilayer PCBs, and for the document sequence see the verification checklist. No freight, port or delivery-performance data appears in the public record for these two plants, so none is asserted here.

Wuxi: recorded factories

Ordered by evidence strength, then by most recent review. Each profile states what was checked, on what date, and which processes are subcontracted rather than performed on site. A listing is not a guarantee of factory ownership or certification validity.

Wuxi Shennan Circuits

无锡深南电路有限公司

Wuxi SCC has 4,879 insured staff and RMB 780m paid-in capital. A 2026 stock-exchange report names it as the site of a RMB 4.6bn project.

Jiangsu multilayerhdi

Founded 2012 · Evidence: Public sources reviewed · Reviewed 2026-11-12

View factory profile

CMK Electronics (Wuxi) - CMK Corporation

希门凯电子(无锡)有限公司

CMK's Wuxi plant: 36,000 m2 a month or 480,000 m2 a year, and 670, 700 or 528 staff. The same CMK brand also names a different Dongguan company.

Jiangsu rigidmultilayer

Founded 2001 · Evidence: Public sources reviewed · Reviewed 2026-11-11

View factory profile

HannStar Board Technology (Jiangyin)

瀚宇博德科技(江阴)有限公司

HannStar Jiangyin is listed at 5.5 million ft2 a month; the group quotes 11 million including two other units. Its 34-layer claim is a limited run.

Jiangsu rigidmultilayer

Founded 2002 · Evidence: Public sources reviewed · Reviewed 2026-11-11

View factory profile