HannStar Board Technology (Jiangyin)
瀚宇博德科技(江阴)有限公司 · Jiangsu · Founded 2002 · Not listed; parent HannStar Board (TWSE 5469)
HannStar Jiangyin is listed at 5.5 million ft2 a month; the group quotes 11 million including two other units. Its 34-layer claim is a limited run.
Use the Jiangyin site for 2-to-20-layer multilayer, server and notebook boards, but treat the capability table as group-level until a plant is named. Keep 5.5 million and 11 million ft2/month apart; the group total folds in Jingcheng and ELNA. Confirm the Chinese legal entity on the purchase order.
Identity and record
| Registered name (Chinese) | 瀚宇博德科技(江阴)有限公司 |
|---|---|
| Registered name (English) | HannStar Board Tech. (Jiangyin) Corp. |
| Founded | 2002 |
| Listed | Not listed; parent HannStar Board (TWSE 5469) |
| Headquarters | Jiangsu |
| Production sites | Jiangyin (Wuxi) · Guanyin (Taoyuan, Taiwan) |
| Official website | https://web.hannstarboard.com/ |
| Evidence level | Public sources reviewed |
| Last reviewed | 2026-11-11 |
A group table with two plant tabs
The capability page opens with two tabs, Guanyin and Jiangyin, and the rows underneath never say which tab they came from. The Chinese legal entity is 瀚宇博德科技(江阴)有限公司, in English HannStar Board Tech. (Jiangyin) Corp., set up in 2002. Its parent is HannStar Board Corporation of Taiwan, ticker TWSE 5469, part of the Walsin Lihwa group. The parent was founded in March 1989 as Pacific Technology Industrial, was acquired by Walsin Lihwa in December 1998 and renamed, went onto the Taiwan OTC market in February 2001 and moved to the main board in August 2003. So when a capability table is published on the group domain, it is the group’s table, not a Jiangyin specification sheet. A buyer reading 2-to-20-layer mass production should assume the number describes a group capability until the supplier states which line will run the order.
5.5 million and 11 million square feet are different things
The Jiangyin site is described on its own profile as about 650 mu of land with a monthly total capacity of 5.5 million square feet. The group profile quotes 11 million square feet a month across the whole PCB business, explicitly including subsidiaries Jingcheng Technology and ELNA. These two figures are not additive and not interchangeable: the second already contains the first and adds other plants. The group also calls itself the largest PCB production group by capacity, a self-description with no third-party ranking by area behind it. The one external anchor in the file is a 2020 revenue ranking that placed HannStar ninth among global PCB suppliers — revenue, not square footage, and group-wide.
Plant history explains why Jiangyin carries the volume. Plant one broke ground in February 2002 and reached mass production in March 2003; plant two followed in July 2004, plant three in June 2005, plant four in September 2007 and plant six in October 2010. In January 2013 HannStar Precision (Jiangyin) was merged into the Jiangyin company. The output mix named in the ownership note is notebook computers, servers, networking equipment, television and set-top-box boards.
Thirty-four layers is a limited run, not a production spec
The capability table is organised in three tiers — mass production, advanced and limited — and the differences matter. Layer count reads 2-20 in mass production, 26 advanced and 34 limited. Board thickness is a flat 0.6 to 3.5 mm across all three. Minimum core thickness runs 4 mil, 3 mil and 2.5 mil. Copper weight rises from 0.5/1/2 oz inner layers in mass production to 4 oz limited. Trace width and space at 0.5 oz inner copper goes 3.5/3.5 mil, 3/3 mil and 2.5/2.5 mil. Plating aspect ratio moves from 10.5:1 to 20:1 at the limited tier. Back-drill stub tightens from 7+/-5 mil to 5+/-3 mil, and impedance tolerance from +/-10 per cent to +7 per cent inner at the limited tier.
A separate company profile says “double-sided to thirty layers”, which does not match the 20/26/34 split. Both statements stay on the record. The practical reading: 34 layers is a limited-production claim, not a ceiling a buyer can order against, and no absolute minimum finished hole diameter is published anywhere — only aspect ratios paired with board thickness and hole size, so any conversion has to be checked against a concrete stack-up.
A parent that moved exchanges twice
The parent was listed in Hong Kong in October 2006 and delisted from HKEX in December 2011, and now exists as the Taiwan-listed TWSE 5469 entity. Early Hong Kong disclosures and current Taiwan annual reports describe the same group but under different accounting standards. For a buyer, that means financial figures pulled from an old HK filing are not directly comparable to the consolidated numbers in the current annual report, and the Jiangyin plant’s own revenue, headcount and yield are never broken out. Group consolidated reporting is the only public financial view.
Certificates from 2003 and 2004, without numbers
ISO 9001 to the 2000 edition is dated January 2003, UL product certification February 2003, and ISO 14001 with TS 16949 February 2004. None of the three publishes a certificate number or says which plants the scope covers, and TS 16949 is the superseded automotive wording. Customer awards are listed for 2014 through 2019 — LG, MSI, Toshiba, Lenovo and Sagemcom — but those are relationship markers, not process parameters. Ask for current certificate numbers and the exact plant scope before treating any of this as audit evidence.
Matching a board to the Jiangyin line
Notebook, server and networking multilayer in the 2-to-20-layer band is the reasonable fit, with advanced-tier work to be quoted case by case. What this record does not support is treating 34 layers, 20:1 aspect ratio or 2.5/2.5 mil as a standard order spec. Put the plant name on the purchase order, and ask the supplier to restate the relevant capability row for Jiangyin specifically.
Open items before a Jiangyin audit
The registry code is absent, as is any standalone Jiangyin revenue or headcount; no absolute minimum finished hole diameter is published, and the two-tab table carries no per-plant capacity split. The 11 million ft2/month figure cannot be attributed to Jiangyin. The “largest PCB group” claim has no independent area-based ranking, and the 30-layer profile line conflicts with the tiered table.
Published limits
Every value below is quoted as published by the company or a public record.
| Parameter | Value as published |
|---|---|
| Layer count, three tiers | Mass production 2-20 layers; advanced 26; limited 34 |
| Board thickness, all tiers | 0.6 to 3.5 mm |
| Min core thickness | Mass 4 mil; advanced 3 mil; limited 2.5 mil |
| Copper weight, inner and outer | Inner 0.5/1/2 oz, advanced 3 oz, limited 4 oz; outer 0.5/1 oz, advanced 2 oz, limited 3 oz |
| Max shipping size | 495 x 571 mm; advanced 506 x 598 mm; limited 506 x 621 mm |
| Min trace width and space, 0.5 oz inner | Mass 3.5/3.5 mil; advanced 3/3 mil; limited 2.5/2.5 mil |
| Plating aspect ratio | 10.5:1; advanced 12.5:1; limited 20:1 at 200 mil board / 10 mil finished hole |
| Back-drill stub and accuracy | 7+/-5 mil; advanced 6+/-4 mil; limited 5+/-3 mil; accuracy +/-4 mil, advanced +/-3 mil CCD |
| Impedance tolerance | +/-10 per cent; advanced inner +8, outer +10; limited inner +7, outer +10 |
| Jiangyin plant scale | About 650 mu of land; Jiangyin site 5.5 million ft2 per month |
| Group PCB capacity | 11 million ft2 per month, including Jingcheng Technology and ELNA |
| Global ranking by revenue | 9th among global PCB suppliers in 2020 |
Certifications on record
A certificate covers a legal entity and a site, not a brand. Scope and expiry are recorded where published.
| Standard | What the record shows |
|---|---|
| ISO 9001 | ISO 9001:2000 certificate obtained January 2003; certificate number and covered plants not published |
| ISO 14001 / TS 16949 | Both obtained February 2004; old-version automotive wording, no certificate numbers listed |
| UL product certification | Passed February 2003; UL file number not published |
Ask this factory for a quote
Send one technical package and compare the replies. The RFQ checklist lists what to include; the quote specifications say which parameters change the price for the process you are buying.
Source and review conventions are described in how we verify. Corrections can be sent through the contact channel.