PCB manufacturers in Yiyang
Yiyang is a relocation cluster: several of its largest plants are Hunan-registered entities of groups that started in Shenzhen or Huizhou, so a Guangdong brand on a quotation often corresponds to a Hunan factory and a different invoicing entity.
Cluster notes reviewed 2026-11-11. Factory records below carry their own evidence level and review date.
Relocation is a legal event, not just a map change
The plants here did not all grow out of local Hunan businesses. Sanlicheng’s parent was founded in Huizhou in 2013, leased a 20,000 m² plant there, signed a Yiyang project in May 2021 and opened the new site in December 2023; the move is described as a full relocation plus new build because the leased plant could no longer hold the required capacity. Gaodeng’s brand belongs to a Hong Kong group founded in 1991, yet the Hunan company is registered as a natural-person-held limited liability company with no visible direct Hong Kong shareholding in the public register. Mingzhenghong began in Shenzhen and now runs its full process — from imaging through lamination to surface finish — in Yiyang, with the Shenzhen branch and a Jiangmen processing unit as nodes of the same legal person, not separate applicants.
Aoshikang is different and worth stating plainly: the listed issuer itself (SZSE 002913) is registered and headquartered in Yiyang, and the Yiyang plant is its own factory rather than a subsidiary. Overseas buyers frequently read the Shenzhen office address as the head office. Its Zhaoqing base is run by a wholly owned subsidiary, Guangdong Xizhen Circuit, and the Thai base by a separate 2023 entity. Jinkang is a genuinely local independent company, registered in 2019 with Guangdong Jinkang Investment holding 81 per cent, Luxshare-ICT (Yiyang) 10 per cent and a local development-investment company 9 per cent; the shareholder that is also its leading customer makes its ownership structure part of the commercial picture.
| Brand on the quote | Hunan legal entity | Other sites in the same group | What the record does not settle |
|---|---|---|---|
| ASKPCB / Aoshikang | 奥士康科技股份有限公司 (listed 002913) | Zhaoqing, Thailand, Shenzhen office | Production is not disclosed per site, so utilisation cannot be derived |
| Mingzhenghong | 明正宏电子(益阳)股份有限公司 | Shenzhen branch, Jiangmen finishing | English and Chinese capacity tables disagree by 50,000 m²/month |
| Jinkang | 湖南金康电路板有限公司 | None listed | 120,000 vs 100,000 m²/month with no explanation |
| Sanlicheng | 湖南三立诚科技有限公司 | Huizhou parent, former leased plant | 700,000 m²/month plan against four lines at 100,000 in 2025 |
| Gaodeng | 湖南高登电子有限公司 | Shenzhen, Dongguan, Foshan group sites | 300,000 m²/month target with no stated source line |
Why the two closest capacity numbers must not be compared
Aoshikang’s Yiyang environmental approval totals 6 million m² per year of designed capacity after the 2023 expansion: 2 million HDI, 2.4 million high-density and 1.6 million automotive. Its 2024 group PCB output was 6.7024 million m² with sales of 6.6760 million m², a scope that includes Zhaoqing and Thailand. The two figures look close enough to divide one by the other, but that calculation would be meaningless — one is a design ceiling at a single site and the other is consolidated actual output across three. This distinction is the single most common error in reading inland-cluster numbers.
The other four show a different failure mode: a plan presented as a current capability. Sanlicheng’s website states 700,000 m² per month and 8.4 million m² per year; a 2025 report describes four lines running at 100,000 m² per month. Mingzhenghong’s Chinese site gives phase one at 200,000 m²/month and phase two at 210,000, while the English site still shows a 410,000 m²/month headline whose internal breakdown — 250,000 Yiyang phase one, 200,000 phase two under construction, 120,000 Shenzhen, 20,000 Jiangmen — mixes full-process capacity with surface-finishing capacity at other addresses. Jinkang’s 120,000 m²/month on its own site and the 100,000 m²/month implied by its environmental approval (1.2 million m²/year of HDI) have never been reconciled. Gaodeng quotes 300,000 m²/month while its investment total appears as both RMB 300 million and RMB 500 million in different sources.
Certificates follow the group, production follows the address
Several of these factories publish system certificates at group or parent level without stating whether the Yiyang site is inside the scope. For a relocated plant this is not a technicality: the certificate may have been issued before the Hunan entity existed, or against the old Guangdong address. Sanlicheng is the clearest case — the board is now made in Yiyang, but the published certificates are group-level and do not name the site. Where an automotive or medical order depends on IATF 16949 or ISO 13485, request the certificate PDF with its scope annex and compare the address with the business licence before comparing prices.
The same care applies to process tables. Sanlicheng publishes unusually concrete geometry — 1500 × 600 mm maximum panel, 0.4–8 mm thickness, 0.5–4 oz copper, 0.1 mm minimum line and space, 0.3 mm minimum hole spacing, 100 µm minimum pad with ±10 µm tolerance — across aluminium, FR-4, CEM-1/3, copper and iron bases. Such a table is useful precisely because it is checkable against a test coupon. A headline monthly output with no line count is not.
A short sequence for qualifying an inland supplier
- Obtain the business licence and the environmental approval for the site, then confirm the addresses are identical. A group brochure is not evidence of either.
- Ask for the current line count and the output of the last three months at that address. Reject figures labelled “planned”, “after full build-out” or “designed” as capacity answers.
- For any certificate, read the scope annex. If the Hunan address is absent, treat the certificate as unverified for this order regardless of the logo.
- Where a Shenzhen or Huizhou office handles the quotation, establish which entity signs the purchase order and which entity holds the product liability.
- Sample from the line that will run production, not from a group showcase board.
The public records for these five contain no freight, port or on-time-delivery figures, so this page draws no conclusion about inland logistics. Yiyang is filed as a standalone cluster because the directory has no Hunan provincial page; the closest comparable relocation story is Huangshi. For the relevant board families see multilayer, HDI and aluminum PCBs; for the document sequence see the verification checklist.
Yiyang: recorded factories
Ordered by evidence strength, then by most recent review. Each profile states what was checked, on what date, and which processes are subcontracted rather than performed on site. A listing is not a guarantee of factory ownership or certification validity.
Aoshikang Technology (Yiyang)
Aoshikang's 2024 output of 6.70 million m2 covers Zhaoqing and Thailand too; the Yiyang 6.00 million m2 is an EIA design limit, not output.
Gaodeng Electronics (Yiyang)
The brand is a 1991 Hong Kong group, but Hunan Gaodeng is a domestic LLC held by natural persons; its 300,000 m2 a month is a target, not a verified output.
Jinkang Circuit Board (Yiyang)
Jinkang lists only Yiyang as a plant, yet quotes 120,000 m2 a month on its site, 100,000 in its EIA and a mixed FPC/HDI/rigid-flex total.
Mingzhenghong Electronics (Yiyang)
The English page claims 410,000 m2 a month but its own items sum to 590,000; Shenzhen and Jiangmen are finishing plants under one Yiyang legal person.
Sanlicheng Technology (Yiyang)
Sanlicheng moved its production from Huizhou to Yiyang, but 700,000 m2 a month is a website plan; a 2025 government note records four lines at 100,000.