PCB manufacturers in Huangshi
Huangshi built a top-three PCB cluster from nothing in fifteen years, on the strength of copper supply and wastewater capacity rather than cheap land, and now runs some of the largest single PCB sites in inland China.
Cluster notes reviewed 2026-11-11. Factory records below carry their own evidence level and review date.
Fifteen years, from no industry to a top-three cluster
Huangshi had no PCB industry in 2010. In 2011 WUS Printed Circuit, a Taiwanese group that had spent two decades in Kunshan, chose the city’s economic development zone for a CNY 3.3 billion board plant. Unimicron followed in 2014, Dynamic Electronics in 2015, Taiwan Union Technology’s laminate operation in 2017, and glass-fibre maker Grace Fabric in 2018.
Fifteen years later the city hosts more than 250 optoelectronics companies, produces roughly two thirds of Hubei’s PCB output, and is described by its own government as one of the three largest PCB clusters in China, with annual capacity above 30 million square metres. Output for the first nine months of 2026 was CNY 34.6 billion, up 41.8 percent year on year.
| Year | What landed | Why it mattered |
|---|---|---|
| 2011 | WUS Printed Circuit | The anchor: CNY 3.3 billion, and proof the city could host a wet process at scale |
| 2012 | PCB industrial park | Zoned land and shared utilities, not scattered plots |
| 2014 | Unimicron | A second Taiwanese tier-one, with a different product mix |
| 2015 | Dynamic Electronics | Flexible and display boards |
| 2017 | Taiwan Union Technology | Laminate on site, closing the chain |
| 2018 | Grace Fabric | Glass fibre, one step further upstream |
| 2019 | Guanghe and others | Server and computing boards |
| 2025 | WUS AI server line | CNY 3.6 billion; cumulative investment above CNY 7 billion |
Why an inland city won: copper and wastewater
The usual explanation for inland clusters is cheap land and subsidies. Neither is the main reason here.
Copper. Huangshi has been a copper centre for three thousand years and produces roughly 700,000 tonnes of cathode copper a year. PCB fabrication is a copper-consuming process, and being next to the smelter shortens the supply chain for foil and plating chemistry.
Wastewater capacity. The decisive factor was that the city built a dedicated wastewater plant — the Wangren facility, commissioned in 2014 with a CNY 110 million investment — including a heavy-metal emergency treatment unit, before the board plants arrived rather than after. Plating and etching produce heavy-metal effluent that ordinary municipal treatment cannot accept. A cluster without that capacity cannot grow, which is precisely what constrained Shenzhen and pushed work out.
That sequence — infrastructure first, tenants second — is why Huangshi scaled faster than clusters with better geography.
What the cluster builds now
The product mix has moved twice. First from nothing to display and consumer boards, through the Taiwanese plants serving panel and handset customers. Then, from around 2023, towards computing: one local manufacturer is reported as the largest mainland supplier of boards for computing servers, and another as first in China for display PCB and among the top five globally.
The 2025 investment by WUS in a dedicated AI server board line is the clearest signal: high layer count, low-loss material, and the tighter impedance control that server work demands. If you are sourcing 16-layer and above high-speed boards, this cluster is now a legitimate alternative to the Pearl River Delta.
The price of being inland
Two costs are real and should be priced before you commit.
Freight. Boards bound for Europe or North America leave through Shanghai or Ningbo, several hours by road or rail, or via the Wuhan rail freight services to Central Asia and Europe. That adds transit time and cost compared with a plant next to Yantian. For high-value, low-weight boards the difference is modest; for large panels shipped in volume it is not.
Communication. The large plants here are Taiwanese-owned or domestic groups with strong process engineering and thinner English-language commercial teams than their Guangdong competitors. Quotations arrive more slowly, and the engineer who can answer a stack-up question may not be the person answering your email. Budget for a factory visit rather than assuming remote support.
Where sourcing goes wrong
- Assuming the big names will quote a small order. These are large single sites with high minimums. A 50 m² order belongs with a tier-two plant, not the anchor factory.
- Comparing ex-works prices without freight. A Huangshi quote that looks cheaper than a Huizhou quote can lose that advantage at the port.
- Treating a Taiwanese group’s Taiwan-based decision as a local one. Price approvals often sit with the parent company, which lengthens negotiation.
- Reading group capacity as site capacity. Multi-site groups publish totals. Ask for the site.
- Assuming environmental compliance is automatic because the park exists. The park treats the water; the plant still has to hold its own discharge permit.
What we check before listing a factory in Huangshi
- Production address within the development zone or Tieshan district, matched to the pollutant discharge permit.
- Whether the site is the group’s flagship or a satellite, and which product families it runs.
- Layer count and material qualified at that site, particularly for low-loss and high-speed work.
- Minimum order quantity and the smallest panel scheduled without surcharge.
- The commercial contact’s English capability and the escalation path to a process engineer.
- Freight route to the port actually used, and the transit time it implies.
Getting there
Wuhan Tianhe airport is about 90 minutes by road; the Wuhan-Huangshi intercity rail takes under an hour. Wuhan is also the regional engineering and university centre, which is where the cluster’s process engineers come from. For a buyer visiting China for one week, Huangshi combines well with a Wuhan or Shanghai leg but not with a Shenzhen one.
Related: multilayer boards and HDI for the work this cluster is built on, high-frequency laminates for server and networking stacks, Dongguan for the competing supply chain, and the verification checklist for the documents to request first.
Huangshi: recorded factories
Ordered by evidence strength, then by most recent review. Each profile states what was checked, on what date, and which processes are subcontracted rather than performed on site. A listing is not a guarantee of factory ownership or certification validity.
Huangshi WUS Electronics
Huangshi WUS has 4,017 staff and RMB 2.929bn 2024 revenue, and its licence explicitly says HDI production. Its industry code is C3969.
C-Flex (Huangshi Xipu Electronics)
Its single page claims first place in China for camera-module FPC by units shipped in 2024. No second source, no certificate numbers, no product pages.
Delton Technology (Huangshi)
A university visit page calls this the largest single PCB plant in the world. The company's own homepage gives 29,500 m2. Both cannot be right.
Dynamic Electronics (Huangshi)
Three years get quoted as this plant's founding: the group's 1988, the company's 2015, first output in 2017. Only the last one is a production date.
Stariver Circuit (Huangshi)
Three headcount figures for one plant, falling from 400 to 170, against an unchanged 120,000 m2 a month. Either the count is partial or the lines are quiet.
Unimicron Huangshi (Xinyixing)
Two names, two addresses and three investment figures attach to one Unimicron site. No certificate number has been published since output began in 2018.