Dynamic Electronics (Huangshi)
超颖电子电路股份有限公司(前身:定颖电子(黄石)有限公司) · Huangshi · Founded 2015 · SSE 603175 (listed 2025-10-24); parent Dynamic Holding, TWSE 3715
Three years get quoted as this plant's founding: the group's 1988, the company's 2015, first output in 2017. Only the last one is a production date.
Suits automotive and display programmes that want an A-share issuer with audited plant-level figures, plus any-layer HDI to 20 layers. Does not suit anyone who needs the 50-layer or 90 GHz numbers tied to Huangshi specifically: the capability table is group-wide and untagged by site.
Identity and record
| Registered name (Chinese) | 超颖电子电路股份有限公司(前身:定颖电子(黄石)有限公司) |
|---|---|
| Founded | 2015 |
| Listed | SSE 603175 (listed 2025-10-24); parent Dynamic Holding, TWSE 3715 |
| Headquarters | Huangshi |
| Production sites | Huangshi · Kunshan · Thailand |
| Official website | https://www.dynamicpcb.com |
| Evidence level | Public sources reviewed |
| Last reviewed | 2026-11-11 |
Four dates, and only one is a production date
The English site never prints a founding year for this plant, because the page describes a group. The group starts in Taiwan in 1988 and reaches the mainland in 2002 with a Kunshan factory. The Huangshi company was registered in 2015. Ground was broken in September 2016, Plant 1 ran its first panel in October 2017 — 395 days from excavation, with a first-line pass rate the city government records as 98.5% — and the site reached full profitability in October 2018.
Four dates, three of which get quoted back as “founded”. A group anniversary says nothing about how long this shop has run its own etchers. The 2015 registration says nothing about when product shipped. For a sourcing decision the date that carries information is October 2017, because that is when a Huangshi workforce, not a Kunshan one, began building boards.
The listed company is the factory
This is the only plant in this batch whose operating company is itself the listed issuer. 超颖电子电路股份有限公司, renamed in February 2023 from 定颖电子(黄石)有限公司, listed on the Shanghai main board on 24 October 2025 as 603175, at RMB 17.08 a share, raising RMB 896.7 million gross. Taiwan’s Dynamic Holding (TWSE 3715) holds just over 97%; the register is dispersed enough that the company reports no controlling shareholder at all.
That structure upgrades the paper trail. Plant figures are not press numbers here. Revenue for 2022 to 2024 was RMB 3.514, 3.656 and 4.124 billion, net profit attributable RMB 141, 266 and 276 million, and 93.33% of 2024 revenue came from 4-layer, 6-layer and 8-layer-and-above boards. The Huangshi base alone booked RMB 3.194 billion in 2024, about 80% of the company.
One trap sits inside the parent’s history. Dynamic Holding only exists from August 2022, when 定颖电子 6251 converted its shares. Any “Dynamic” financial series older than that refers to a different listed vehicle, so a ten-year chart stitched from both is not comparable.
Two utilisation rates, two perimeters
A July 2025 industry-bureau article puts Huangshi capacity utilisation at 98.7% for 2024. The prospectus gives 90.17%, 90.74% and 93.57% for 2022, 2023 and 2024. Both are published, neither is arithmetically wrong, and the gap is the denominator: one base, one company that includes Kunshan and, later, Thailand.
Neither figure says anything about a bottleneck. Ask for loading on the specific line your board would run on — the hole-drilling or the lamination press — and for the last four quarters of it.
The process table belongs to three plants
dynamicpcb.com is a group site and its capability page carries no plant tag: 50-layer high-layer-count boards, any-layer HDI to 20 layers on a 9+n+9 build, 50/50 µm line and space with ±50 µm layer-to-layer registration, back-drilling at 30:1 up to 6.0 mm board thickness, VIPPO down to a 0.15 mm hole, 4 oz copper on 8 layers, high-frequency laminate extended to 90 GHz, semi-flex leaving 0.25 mm in the bend.
Kunshan builds high-frequency and HDI work; Thailand is on the plant list. Huangshi is Plants 1, 2 and 3 — a 400,000 m² site, 366,000 m² of floor, 4,566 people, USD 709 million of assets against USD 58 million of paid-in capital. The plant is real and large. It is not automatically the plant that holds ±50 µm registration at 50 layers.
Put the stack-up, the tolerance and the panel size on the RFQ and make the reply name the site.
Automotive first, but the mix split is soft
Automotive is the declared industry and IATF 16949 was completed in 2018 on the prospectus account. The customer list reads Continental, Valeo, Bosch, Aptiv and Tesla, with BOE and LG in displays, Seagate, Western Digital and Hynix in storage. A November 2025 city article counts 127 international certifications including UL — a count of documents, not a list you can audit.
The split that circulates, automotive 63% and display 17% and storage 13%, comes from a campus-recruitment slide reposted by a WeChat account. The public prospectus summary does not carry those numbers. Read them as a hint about where revenue sits, not as a citation.
Ranking: 41st, or top 40
Prismark places the company 41st among global PCB makers in the prospectus; the same city bureau, four months later, writes “global top 40”. NTI put it in the global top ten and China’s top five for automotive electronics boards, again per the prospectus. One place apart is noise, and the direction of the error is predictable: promotional text rounds toward the round number.
The figure with consequences is the RMB 400 million of IPO proceeds going into a second phase of high-layer-count and HDI capacity, 360,000 m² a year, construction starting 2025, with RMB 1.2 billion of added annual revenue guided at full run. That is a plant getting denser, not a plant adding floor.
What this factory suits
Automotive control and power boards, display boards, storage boards, and HDI up to any-layer where the drawing states its tolerance. A buyer who wants a supplier with audited plant-level financials and a mainland disclosure trail will find little else in Huangshi that publishes at this granularity.
It does not suit the buyer who needs “50 layers” or “90 GHz” quoted as a Huangshi fact rather than a group fact. Expect a plant visit and a build record before that table is believed.
What the record does not settle
No unified social credit code, no certificate numbers, no Huangshi-only monthly capacity, no city for the Thailand plant, no automotive revenue share from a primary document. Asset value and headcount are company-published and unaudited in public. The 98.7% and 93.57% utilisation figures will keep appearing in both forms; this page reproduces them side by side rather than picking one.
Published limits
Every value below is quoted as published by the company or a public record.
| Parameter | Value as published |
|---|---|
| High-layer-count PCB | Up to 50 layers on the group capability table |
| Any-layer HDI | 20 layers; 9+n+9 build-up |
| Line width and layer registration | 50/50 um line and space; layer-to-layer registration +/-50 um |
| Back-drilling | 30:1 aspect ratio; 6.0 mm max thickness; stub 5+/-3 mil; drill shift +/-75 um |
| VIPPO via-in-pad | 0.15 mm min hole; 30:1 plating ratio; 0.65 mm min BGA pitch |
| Heavy copper | 4 oz (140 um) on 8 layers; 6 oz (210 um) on 4 layers |
| High-frequency laminate | Extended to 90 GHz; warpage 0.5% or less |
| Huangshi plant scale | USD 709M assets; 400,000 m2 site; 366,000 m2 floor across Plants 1-3; 4,566 staff |
| Capacity and utilisation | Huangshi plus Kunshan above 3 million m2 a year; utilisation 93.57% in 2024 |
| IPO phase-two expansion | RMB 400M for a further 360,000 m2 a year of HLC and HDI |
Certifications on record
A certificate covers a legal entity and a site, not a brand. Scope and expiry are recorded where published.
| Standard | What the record shows |
|---|---|
| IATF 16949 | Completed in 2018 per the prospectus; no certificate number or expiry date is published |
| ISO 9001 plus six other systems | Prospectus says all seven systems are obtained and operating; no numbers, scope or expiry published |
| UL and 127 international certificates | A count from a November 2025 Huangshi industry-bureau article, not a list of registrations |
Ask this factory for a quote
Send one technical package and compare the replies. The RFQ checklist lists what to include; the quote specifications say which parameters change the price for the process you are buying.
Source and review conventions are described in how we verify. Corrections can be sent through the contact channel.