Shanghai Jiajietong (Fast-PCB)
上海嘉捷通电路科技股份有限公司 · Shanghai · Founded 2004 · Not listed (NEEQ 838338 until delisting on 2021-02-19)
Jiajietong's Jiading address runs real etch lines - two plants plus a 2025 expansion - yet the same site prints four plant-area pairs and three age claims.
A quick-turn house for prototype boards and small-batch SMT - one of the few Shanghai addresses with real production lines behind it. Ask which Jiading plant runs the order, and get prototype SMT limits in writing; the published table is batch-only.
Identity and record
| Registered name (Chinese) | 上海嘉捷通电路科技股份有限公司 |
|---|---|
| Registered name (English) | Shanghai Jiajietong Circuit Technology Co., Ltd. |
| Founded | 2004 |
| Listed | Not listed (NEEQ 838338 until delisting on 2021-02-19) |
| Headquarters | Shanghai |
| Production sites | Shanghai (Jiading) |
| Official website | https://www.chinafastpcb.com/ |
| Evidence level | Public sources reviewed |
| Last reviewed | 2026-11-11 |
The Jiading address has etch lines behind it
Of the five Shanghai addresses in this batch, Jiajietong’s is the one where production actually happens. The company states it runs two plants inside the Jiading Industrial Zone — the first on 28,000 m² of land with roughly 27,000 m² of building, the second on 13,000 m² of land and 26,000 m² of building — and a third plant was commissioned on 21 August 2025, designed at full ramp for 360,000 m² of PCB per year and 7.2 billion SMT placement points. An order sent to this address is built at this address. The legal entity is 上海嘉捷通电路科技股份有限公司, founded in April 2004, a private Chinese joint-stock company; secondary registry summaries name chairman Yan Xuefeng as controlling shareholder with 34.1% and disclose no foreign parent.
Quick-turn boards with an assembly line behind them
Fast-PCB is the English-facing brand of the same company. The model is prototype fabrication plus SMT under one roof: rigid boards quoted at 2–40 layers on quick-turn and small-batch terms, pure flexible boards to 8 layers, and rigid-flex — where the English copy claims 2–24 layers and the Chinese product copy on the same site says 2–16. Ask about that gap before a 20-layer stack-up is quoted. Stated output is 12,000 m² per month across more than 9,000 part numbers; a part count that high against that area says the average job is small, which is the quick-turn business model in one figure.
Assembly is specified to 510 x 510 mm panels, ±30 µm placement accuracy at 3 sigma, 0.30 mm BGA pitch with 0.25 mm ball diameter, and components from 0.3 x 0.15 mm up to 120 x 90 mm with a 30 mm height limit. One caution sits in the label rather than the numbers: the table is headed “batch manufacturing capability”, and prototype limits for a one-to-five-piece run are not stated anywhere.
A website that disagrees with itself
Plant size appears in four different pairs across captured versions of the site: 53,000 m² of building on 41,000 m² of land on the profile page, 10,800 on 11,200 on the English homepage, and 24,733 on 19,133 or 15,900 on 12,300 in other captures of the Chinese homepage — none dated, none scoped to a specific building. Experience is claimed as “20+ years” in Chinese, “8+ years” on the English homepage and “10+ years” on English product pages, all against a founding date of April 2004. None of this makes the factory worse; it makes the marketing pages unusable as a specification source.
The one figure that fails outright is minimum line/space, printed as “0.075/0.075 um” with no definition of the unit in mm or mil. As printed it cannot be used as a spec; ask for the real number in writing.
Delisted from the NEEQ in 2021
The company traded as 838338 on the NEEQ board and was delisted on 19 February 2021 per the exchange notice. There are therefore no current filings to check revenue or capacity against — every number on this page is self-reported from the company’s own sites.
Two UL files and a badge pile
The English product page prints UL file E300750 for rigid boards and E505046 for flexible boards, with no issue or expiry dates. The profile page badges IATF 16949:2016, ISO 9001, ISO 14001 and ISO 45001:2018 — and, on the same page, older OHSAS 18001 and ISO/TS 16949 badges remain on display. Which set is current cannot be determined from the site. Aerospace, automotive and medical buyers should request certificate numbers with scope and expiry before relying on any badge.
Fit and the questions to send
For buyers who need prototype boards and assembled PCBA from a single Shanghai legal entity on short lead times, this profile fits: many part numbers, small batches, fabrication and SMT under the same registry record. It fits less well for volume automotive programmes — the IATF badge carries no published scope — and it fits not at all for buyers who need published HDI limits: no HDI layer count, no laser-drill diameter and no impedance tolerance appear on any capability page.
What the record leaves open
The unified social credit code, the street address (Xingqing Rd 699 appears only in secondary sources), employee count, HDI layer count and certificate numbers are all unpublished. Which of the four plant-area pairs is current is not stated, and the 2025 plant’s actual ramp against its 360,000 m² design figure has no independent check.
Published limits
Every value below is quoted as published by the company or a public record.
| Parameter | Value as published |
|---|---|
| Rigid PCB layer count (quick-turn / small batch) | 2-40 layers |
| Rigid-flex layer count (English site) | 2-24 layers (Chinese product copy on the same site says 2-16) |
| Pure flexible PCB layer count | Up to 8 layers |
| Monthly PCB output | 12,000 m2 per month; more than 9,000 part numbers |
| Maximum finished board thickness | 10 mm |
| Minimum line/space (as printed on page) | 0.075/0.075 - unit printed as 'um'; no mm/mil definition given |
| SMT maximum PCB size | 510 x 510 mm |
| SMT placement accuracy | +/-30 um (3 sigma); X-Y axis 10 um |
| BGA/CSP minimum ball pitch | 0.30 mm pitch, 0.25 mm ball diameter |
| SMT component size range | 0.3 x 0.15 mm2 to 120 x 90 mm2; max component height 30 mm |
Certifications on record
A certificate covers a legal entity and a site, not a brand. Scope and expiry are recorded where published.
| Standard | What the record shows |
|---|---|
| IATF 16949:2016 | Named on the company profile page; no certificate number, scope or expiry date published. |
| ISO 9001 | Named on company profile; version, certificate number and validity dates not stated. |
| ISO 14001 | Named on company profile; no certificate number or validity dates. |
| ISO 45001:2018 | Named on company profile; older OHSAS 18001 and ISO/TS 16949 badges also remain on the same page. |
| UL - rigid PCB (file E300750) | File number E300750 'Wiring, Printed - Rigid' printed on the English product page; no issue or expiry date. |
| UL - flexible PCB (file E505046) | File number E505046 'Wiring, Printed - Flexible' printed on the English product page; no issue or expiry date. |
Ask this factory for a quote
Send one technical package and compare the replies. The RFQ checklist lists what to include; the quote specifications say which parameters change the price for the process you are buying.
Source and review conventions are described in how we verify. Corrections can be sent through the contact channel.