Putian Technology PCB (formerly GCI Jiesai)
中电科普天科技股份有限公司 · Guangdong · Founded 2000 · Shenzhen Stock Exchange 002544 (CETC-controlled)
Putian Technology is a CETC-controlled listed group whose PCB arm runs two named bases. Its 88-layer claim sits beside a 40-layer design limit.
A CETC-listed group with two named PCB bases and a published speciality table, suited to high-reliability small-batch and quick-turn work. The catch is entity mapping: the plant sits in a division of a renamed issuer, and 88 layers is a ceiling beside a 40-layer design limit. Confirm the signing entity and current scopes first.
Identity and record
| Registered name (Chinese) | 中电科普天科技股份有限公司 |
|---|---|
| Registered name (English) | CETC Putian Technology Co., Ltd. |
| Founded | 2000 |
| Listed | Shenzhen Stock Exchange 002544 (CETC-controlled) |
| Headquarters | Guangdong |
| Production sites | Yunpu Industrial Zone, Guangzhou · Fushan Industrial Park, Doumen, Zhuhai |
| Official website | http://www.chinagci.com/ |
| Evidence level | Public sources reviewed |
| Last reviewed | 2026-11-11 |
The listed company and the board plant are not the same name
The group now calls itself CETC Putian Technology, a Shenzhen-listed issuer under code 002544 controlled by China Electronics Technology Group. Its own homepage says it was formed in 2000 from the civilian division of the group’s 7th Research Institute, with registered capital of RMB 681 million and about RMB 9.4 billion in assets, and describes four business blocks: public network communications, private network communications, smart applications and intelligent manufacturing. PCB design, manufacture and assembly sit inside that fourth block. The company was previously known as Guangzhou GCI Jiesai Technology, and the board-making unit was the Electronic Circuit Branch, also called the 9th division, founded on 13 January 2000.
For an overseas buyer this is the first thing to pin down. A purchase order may be issued by the listed parent, by a branch, or by one of the two site entities. The marketing site uses the group brand; an older industry directory still lists gcipcb.com and a Guangzhou Development Zone address. Ask for the business licence of the signing entity and check that the certificate scope names the same address as the quotation header. A state-controlled listed group is a strong counterparty, but that strength only transfers to your order if the paperwork follows the same chain.
88 layers of manufacturing beside 40 layers of design
The official capability page makes two claims that look contradictory until you separate the services. It says the group operates the largest domestic speciality PCB design and manufacturing base and can process high-performance boards up to 88 layers. The same page, under design capability, gives a maximum of 40 design layers, 10G differential signals, 60,000 pins and a minimum BGA pitch of 0.4mm. An older profile of the Electronic Circuit Branch quotes a maximum of 32 layers and a 22,000-plus square metre production base.
None of these is necessarily false. A design centre’s limit and a fabrication line’s ceiling are different constraints, and the 32-layer figure belongs to an earlier division description. But 88 layers is a ceiling, not a statement about yield, panel size, material or batch quantity, and it is not accompanied by a stack-up example. If your job is a 20-layer backplane, the useful question is not whether the supplier has ever built 88 layers; it is whether that line runs your material at an acceptable yield in your volume. Request a dated capability table split by layer count and by site.
Two named production bases, one quick-turn promise
The official page names two bases: Guangzhou Yunpu Industrial Zone and Fushan Industrial Park in Doumen, Zhuhai. It also says PCB design centres operate in Guangzhou, Chengdu, Xian, Shanghai and Shijiazhuang. Quick-turn commitments are specific: double sided boards in as little as 24 hours, multilayer boards in two to four days, with ERP tracking of online order status. The positioning is explicitly multi-variety, small-batch, short-lead-time, high-reliability work rather than commodity volume.
That combination is unusual and worth reading carefully. Fast-turn prototyping and speciality military or aerospace boards are different operating models, and a supplier claiming both should be asked which site handles which. An older directory entry notes that a new plant in Doumen Fushan Industrial Park was being staffed, which suggests the two bases may have different equipment ages and different approval scopes. Ask which of the two will run the order, and whether the quick-turn promise applies to the same line that holds the military approvals.
The approvals are old-edition names, not current scopes
A secondary profile of the Electronic Circuit Branch lists GJB 9001A-2001 weapons equipment quality system certification, a weapons research and production licence, military basic product approval, GB/T 19001-2008, GB/T 24001-2004 and UL safety certification. Every one of those system labels refers to a withdrawn edition: GJB 9001A was superseded by GJB 9001B and then 9001C, and the 2008 and 2004 GB/T editions have since been replaced. That does not mean the factory lost its approvals; it means the publicly available list is out of date and carries no certificate numbers.
The official page names aerospace, aviation, navigation, rail, power and communications as end markets, but no AS9100 or NADCAP approval appears in the material reviewed. For a domestic military programme, the GJB lineage is the relevant one and should be verified through the current certificate. For an export aerospace order, the absence of a published AS9100 scope is a gap to close directly with the supplier, not something to infer from the end-market list.
What the PCBA numbers do tell you
The assembly section is the most concrete part of the capability page and the easiest to verify against your own bill of materials. It gives a standard solderable board size of 500x450mm and a maximum of 1480x450mm, board thickness from 0.1 to 5.0mm, component sizes from 01005 (0.4x0.2mm) to 120x90mm, a maximum component height of 25mm, minimum pitch of 0.4mm, placement accuracy of plus or minus 0.04mm for chip parts and 0.025mm for ICs, and press-fit parts within 100mm of the board edge. Conformal coating and washing are stated for 500x450mm boards.
Those are usable screening values. If your assembly exceeds 500mm in length or needs 0201 parts on a rigid-flex substrate, you can rule the standard process in or out before asking for a quote. Treat them as the standard window, though: the maximum sizes are usually special setups, and the page does not say which site holds the long-board line.
Before this factory goes on a shortlist
- Ask which legal entity signs the order, and obtain its business licence and the certificate scope for the exact production address.
- Request a dated capability table by site, split into design, fabrication and assembly, with the layer ceiling tied to a material and batch size.
- Get current certificate PDFs. The public list uses withdrawn GJB 9001A-2001 and GB/T edition names and gives no numbers.
- Confirm whether the 24-hour and two-to-four-day lead times apply to the same line that holds the speciality approvals.
- For aerospace export work, ask specifically for an AS9100 scope; no such approval was located in the sources reviewed.
Published limits
Every value below is quoted as published by the company or a public record.
| Parameter | Value as published |
|---|---|
| Published manufacturing layer ceiling | Speciality boards up to 88 layers; special structures, high frequency microwave and complex blind/buried via |
| Named production bases | Modern bases in Guangzhou Yunpu Industrial Zone and Zhuhai Doumen Fushan Industrial Park |
| PCB design capability limits | 10G differential signals; max 40 design layers; 60,000 pins; min BGA pitch 0.4mm; BGA1932 45x45 |
| Quick-turn manufacturing lead times | Double sided boards in as little as 24 hours; multilayer boards in 2 to 4 days |
| PCBA assembly limits | Standard 500x450mm, max 1480x450mm; board thickness 0.1-5.0mm; 01005 to 120x90mm parts |
| Placement accuracy and press-fit | Chip parts +/-0.04mm, IC parts +/-0.025mm; min pitch 0.4mm; press-fit 100mm from board edge |
| Group profile and capital | CETC-controlled listed company 002544, formed 2000 from the 7th Research Institute; capital RMB 681m |
| Division history and older layer claim | Electronic Circuit Branch founded 2000-01-13 as the 9th division; older profile states max 32 layers |
| Division plant area and certifications | 22,000-plus m2 production base; GJB 9001A-2001, weapons research licence, military component approval |
| Division contact and legacy domain | 231 and 235 Kaifa Avenue, Guangzhou Development Zone; gcipcb.com; 020-22321819 |
Certifications on record
A certificate covers a legal entity and a site, not a brand. Scope and expiry are recorded where published.
| Standard | What the record shows |
|---|---|
| GJB 9001A-2001 | Weapons equipment quality system named in a division profile. A withdrawn 2001 edition; no certificate number or current scope located. |
| Weapons research and production licence | Named alongside military basic product approval in the same profile. No licence number or issuing body published. |
| GB/T 19001 / 24001 and UL | 2008 and 2004 edition management systems plus UL product safety, listed without numbers in a secondary profile. |
| AS9100 not located | Aerospace is named as an end market, but no AS9100 or NADCAP approval appears in the sources reviewed. |
Ask this factory for a quote
Send one technical package and compare the replies. The RFQ checklist lists what to include; the quote specifications say which parameters change the price for the process you are buying.
Source and review conventions are described in how we verify. Corrections can be sent through the contact channel.