King Brother (KINGBROTHER)
深圳市金百泽电子科技股份有限公司 · Shenzhen, Guangdong · Founded 1997 · SZSE ChiNext 301041 (2021-08-11)
Kingbrother books 100,000 PCB part numbers a year, while an older page on the same site implies 120,000. Neither figure is in square metres.
A prototype and small-batch house for buyers who need ten boards next week and a documented process behind them, with EMS attached for the assembly step. It is not a volume factory and publishes no m2 capacity, so use it below roughly a thousand pieces a year per design and ask for plant-level loading rather than a brochure number.
Identity and record
| Registered name (Chinese) | 深圳市金百泽电子科技股份有限公司 |
|---|---|
| Registered name (English) | Shenzhen King Brother Electronics Technology Co., Ltd. |
| Founded | 1997 |
| Listed | SZSE ChiNext 301041 (2021-08-11) |
| Headquarters | Shenzhen, Guangdong |
| Production sites | Shenzhen · Huizhou · Beijing · Xi'an · Hangzhou |
| Official website | https://www.kingbrother.com/ |
| Evidence level | Public sources reviewed |
| Last reviewed | 2026-11-11 |
A prototype house that counts jobs, not square metres
Almost every other factory on this site answers “how big” in square metres per month. King Brother answers in part numbers. Its PCB page states 100,000 part numbers a year, describes the business as prototypes and small-to-medium batches, and names 15,000 customers across more than 30 countries. No monthly area figure appears anywhere on the site.
That choice of unit is the most useful thing about the page. A prototype shop is not constrained by etching capacity. It is constrained by the number of times someone has to load a different set of films, change a drilling program, re-qualify a profile and write a new inspection plan. Area tells you how much copper the tanks can dissolve in a day. Job count tells you how much engineering the front office can absorb. For a buyer sending ten designs a quarter, the second number is the one that decides whether your files enter the queue on Monday or on Friday.
The same output, stated twice, twenty per cent apart
The PCB page says 100,000 part numbers a year. An older text on the same site says the plant turns out 10,000-plus part numbers a month, which annualises to 120,000. The gap is 20,000 jobs, a fifth of the smaller figure.
Neither page carries a date, so there is no way to tell which is current. There is also a translation problem underneath. The Chinese runs 月产图号一万余款 and 年产十万批图号: one counts 款 (distinct part numbers), the other 批 (batches). A single part number that ships twice is two batches and one part number. The two statements may both be true, in different units, at different moments. A buyer who needs a capacity number should ask for jobs released per month and average panel count per job, in writing.
The lead-time ladder is the real specification
Five rungs, published openly: 24 hours for 2 layers, 48 for 4 to 6, 72 for 8 to 12, 96 for 14 to 20, 120 above 20. Below the ladder sit the process floors — 3/3 mil line and space, 0.1 mm minimum drill, impedance held to plus or minus 8 per cent, profile to plus or minus 0.1 mm.
The ladder is more informative than any capacity claim, because it shows where the factory expects to be slow. Every rung adds roughly a day. That is the shape of a shop that keeps a fast lane for simple boards and schedules the heavy builds into a normal queue.
What the ladder does not say matters just as much. It does not say whether the clock starts at data release or at purchase-order confirmation, whether electrical test is inside the window, or whether 24 hours means one working day or one calendar day. On a two-layer board those three ambiguities can add a week.
One hundred and eighty engineers out of fifteen hundred and eighty staff
King Brother lists 180-plus engineers with PCB experience. The 2025 annual report puts total headcount at 1,580, so engineering is a little over a tenth of the company. That ratio is the signature of a prototype business: the selling cost sits in Cam, DFM review and test engineering rather than in operators.
The 3/3 mil floor is worth reading with a date attached. In Shenzhen in 2026, 3/3 is table stakes for a shop that wants prototype work, not a differentiator. The question to put to the engineer is yield at 3/3 on your stack-up, not whether 3/3 is possible.
Seven hundred million in revenue, and a thin net margin
Revenue for 2025 was RMB 701 million with RMB 20.16 million of net profit attributable to shareholders. The top five customers took 13.82 per cent of sales; the top five suppliers provided 27.93 per cent of purchases. A customer base that flat is what a prototype book looks like — thousands of accounts, none of them large enough to set the price.
The margin says the same thing from the other side. This is not a factory with pricing power, and a programme that needs three years of price-downs is better placed elsewhere.
Five cities, and no statement of which one etches
The group profile places research and production in Shenzhen, Huizhou, Beijing, Xi’an and Hangzhou, with the head office in Futian. It does not say which of those cities holds a PCB line, which is an EMS site and which is a design centre. Huizhou is the obvious guess for fabrication and Shenzhen for the front end, but guessing is not sourcing.
Layer capability is equally loose. The site shows a 22-layer 3.0 mm backplane and a 20-layer 4.0 mm industrial backplane as examples. Examples are not limits, and no maximum layer count is published. Treat anything above 20 layers as a question rather than a capability.
Two spellings of one company
The site writes Kingbrother throughout. The annual report renders the legal English name as Shenzhen King Brother Electronics Technology Co., Ltd. Same registrant, different spacing. It matters at the two moments where paperwork is checked: a UL file search and a contract header. Use the filing spelling on documents and the brand spelling in conversation, and do not let a mismatch on a certificate startle you.
What is not established
No unified social credit code, no per-plant capacity, no maximum layer count, no certificate numbers or expiry dates, and no customer names. Patent counts also disagree between two official pages: one lists 36 invention patents, 88 utility models and 81 software copyrights, the other says 30-plus, 90-plus and 90-plus. Assembly volume, SMT line count and EMS capacity are not published at all.
Published limits
Every value below is quoted as published by the company or a public record.
| Parameter | Value as published |
|---|---|
| Annual PCB part-number throughput | 100,000 part numbers a year |
| Quick-turn lead time, 2-layer | 24 hours |
| Quick-turn lead time, 4-6 layer | 48 hours |
| Quick-turn lead time, 8-12 layer | 72 hours |
| Quick-turn lead time, 14-20 layer | 96 hours |
| Quick-turn lead time, above 20 layer | 120 hours |
| Minimum line width and spacing | 3/3 mil |
| Minimum drilled hole | 0.1 mm |
| Impedance tolerance | +/-8% |
| Outline dimensional tolerance | +/-0.1 mm |
| PCB engineering staff | 180+ engineers with PCB experience |
Certifications on record
A certificate covers a legal entity and a site, not a brand. Scope and expiry are recorded where published.
| Standard | What the record shows |
|---|---|
| ISO 9001 / 14001 / 45001 | Listed on the qualifications page with no certificate numbers, no site list and no validity dates |
| IATF 16949 | Named for automotive work; the page gives no certificate number, no certified site and no expiry |
| ISO 13485 | Medical device system named without scope or validity, so the covered product families are unknown |
| ISO/IEC 17025 | Laboratory accreditation claimed; no scope of testing and no certificate number published |
| CQC / UL / CCC | Product marks listed together; no UL file number and no CQC certificate number shown |
Ask this factory for a quote
Send one technical package and compare the replies. The RFQ checklist lists what to include; the quote specifications say which parameters change the price for the process you are buying.
Source and review conventions are described in how we verify. Corrections can be sent through the contact channel.