Sector requirements

PCB suppliers for medical device programmes

For medical devices the deciding requirements are not on the certificate but in the process: ionic contamination limits, a controlled cleanroom for the steps that need it, sterilization compatibility, and a written change-notification process. ISO 13485 held by a PCB supplier is useful evidence of a quality system, but its scope statement is what tells you whether it covers board manufacturing at all.

Sector requirements reviewed 2026-11-11. See how we record evidence.

ISO 13485:2016FDA QMSR (21 CFR 820)EU MDR 2017/745ISO 14971 risk managementISO 14644-1 cleanroom classesIPC-TM-650 2.3.25 ionic contamination

What ISO 13485 covers, and what it does not

ISO 13485:2016 is a quality management standard for organisations in the medical device supply chain. It is written around regulatory requirements rather than customer satisfaction, which is why it demands things a general ISO 9001 system does not: documented risk management to ISO 14971, control of contamination, validation of processes that cannot be verified by inspection afterwards, and a formal feedback loop from production and post-market.

A bare-board supplier is a component manufacturer, and ISO 13485 certification is not mandatory for component manufacturers. So the certificate is a bonus, not a gate. What matters is the scope statement:

  • “Manufacture of printed circuit boards” is a scope that covers your order.
  • “Design and manufacture of medical electronic assemblies” is a scope that covers assembly, and not necessarily a bare board.
  • “Distribution of electronic components” is a scope that covers nothing you care about.

Read the scope on the certificate, and check the site address, exactly as you would for IATF 16949. A trading company can hold a certificate and forward it.

The FDA rule change that caught suppliers out

The FDA’s Quality Management System Regulation took effect on 2 February 2026 and replaced the old 21 CFR 820 with a framework that incorporates ISO 13485:2016 by reference. For a device maker already running ISO 13485 the transition is mostly documentation; for suppliers it changes what an FDA inspection can ask to see.

The practical consequence for a Chinese PCB supplier is that “we follow our customer’s requirements” is no longer a sufficient answer about its own quality system. The device maker now has to show that its suppliers are controlled under a system that meets the incorporated standard, which means a supplier questionnaire, an audit record and a defined re-evaluation interval. If you are the device maker, you will be asked for those documents, and a supplier that cannot support them becomes a finding against you.

Ionic contamination is the number to argue about

Residues left on a board after fabrication are the most consequential defect class in medical electronics, because they are invisible at incoming inspection and they fail months later as leakage current or corrosion under a coating.

Two test methods matter, and they answer different questions:

Method What it measures Limitation
IPC-TM-650 2.3.25 (ROSE) Total ionic contamination, reported as µg NaCl equivalent per cm² One aggregate number; a clean board and a board with the wrong ion can score the same
IPC-TM-650 2.3.28 (ion chromatography) Individual ions — chloride, bromide, sulphate, weak organic acids Slower and more expensive, but tells you which process is leaking

The long-standing acceptance limit for ROSE is 1.56 µg/cm² NaCl equivalent. Treat it as a screening threshold, not a specification: it was derived from flux residue behaviour decades ago, and it does not bound what matters for a high-impedance sensor input. For those designs, ask for ion chromatography on a production panel, with the specific ion limits agreed in writing.

What drives the number is rinsing discipline after plating, after solder-mask development and after surface finish. Ask for the rinse water conductivity log and the DI water specification; a factory that cannot produce either is controlling residues by habit.

Cleanroom, and where the claim usually breaks

ISO 14644-1 classes ISO 7 and ISO 8 are the common bands for medical assembly. The gap between the claim and the reality is almost always spatial rather than technical: the SMT line sits in a controlled area, and the boards are then packed, labelled and boxed in an uncontrolled corridor at the back of the building.

When a supplier claims a cleanroom, ask for three things: the classification certificate with the room identified, the particle count records at the specified interval, and the location of the packing step relative to the controlled boundary. If packing is outside it, the cleanroom applies to the wrong end of the process.

For bare boards the cleanroom requirement is usually lighter than for assembly, but the same logic applies to solder-mask cure, final clean and packaging.

Sterilization compatibility changes the material choice

Medical devices are sterilised after packaging, and the method decides what the board has to survive:

  • Ethylene oxide (ISO 11135) — the gentlest on materials, but residuals are regulated. ISO 10993-7 sets allowable limits for EO and its chlorohydrin byproduct, and the limits depend on how long the device contacts the patient.
  • Gamma or electron beam (ISO 11137) — typical doses of 25 to 40 kGy. Radiation degrades polymers; some solder masks and laminates yellow, embrittle or lose adhesion. Ask for a radiation-dose tolerance statement for the specific mask, not for “FR-4” in general.
  • Steam autoclave (ISO 17665) — 121 °C to 134 °C with saturated steam, repeated. This is a Tg problem as much as a moisture problem: a standard 130 °C laminate cycled repeatedly at 134 °C will delaminate. If the device is reusable and autoclaved, the stack-up needs a high-Tg laminate and the discussion starts at the material, not the finish.
  • Vaporised hydrogen peroxide — increasingly common for instruments; compatibility with the mask and with any conformal coat has to be confirmed by the material supplier.

Flexible and rigid-flex, where medical actually differs

A large share of medical board work is flexible: catheter shafts, sensor flex tails, disposable diagnostic strips. This shifts the requirement away from layer count and towards mechanical behaviour:

  • Bend radius and dynamic flex cycles. A static-flex tail and a dynamic-flex joint are different specifications. Ask for the cycle count and the bend radius the design was qualified at.
  • Adhesive system and delamination. Thin polyimide with acrylic adhesive behaves differently from adhesive-less constructions under repeated flex and under sterilization.
  • Via and pad geometry at the connector end. Insertion forces at a flex tail connector damage pads that were sized for a rigid board.
  • Singulation and handling. Laser cutting leaves a different edge and heat-affected zone than die cutting; for implant-adjacent parts this is a documented decision, not a preference.

Where this goes wrong in China

  • ISO 13485 certificate with a scope that excludes board manufacturing. Read the scope, not the logo.
  • Cleanroom claim that ends at the packing door. Ask where packing happens.
  • ROSE test quoted as the only residue evidence. A single aggregate number cannot tell you which process is contaminating.
  • No change-notification clause. Under EU MDR the device maker has to control supplier changes; a supplier that swaps a solder mask silently creates a regulatory event you did not authorise.
  • Sterilization compatibility asserted rather than tested. “Suitable for gamma” without a dose-tolerance statement from the material maker is not evidence.
  • A medical-grade claim on a consumer line. The control plan, the traceability and the cleanroom have to cover the line your order runs on.

What we check before listing a factory for medical

  • ISO 13485 certificate: scope, site address, certification body, expiry, and whether design is included where claimed.
  • Ionic contamination method and limits, with a production lot result rather than a specimen result.
  • Cleanroom classification, particle records and the physical location of the packing step.
  • Sterilization methods supported, with material-maker dose or temperature statements.
  • The change-notification process, and a real PCN issued in the last two years.
  • Traceability from panel to lot, and the retention period the device maker needs for its technical file.
  • Whether the same line serves medical and non-medical work, and how the line is cleared between them.

Related: flexible boards and rigid-flex for catheter and sensor work, conformal coating where residues and coating thickness interact, testing for what electrical test does and does not catch, and the environmental compliance guide for material declarations.

Medical Devices: recorded factories

Ordered by evidence strength, then by most recent review. Each profile states what was checked, on what date, and which processes are subcontracted rather than performed on site. A listing is not a guarantee of factory ownership or certification validity.

Lanshun Technology (Shenzhen)

深圳市兰顺科技有限公司

Lanshun lists 19 SMT machines and no board-making gear, yet its own table quotes 46 layers. Registered scope stops at assembly. Who makes the bare board?

Shenzhen multilayerrigid

Founded 2017 · Evidence: Public sources reviewed · Reviewed 2026-11-19

View factory profile

SEIC (Shenzhen Shinelong Electronics)

深圳先隆电子实业有限公司

SEIC pages say 75, 400 or 500 staff and put the plant at 1,800 or 12,000 square metres. A buyer's question list built from the differences.

Shenzhen

Founded 1997 · Evidence: Public sources reviewed · Reviewed 2026-11-19

View factory profile

Shanxu Precision Circuit (Shenzhen)

深圳市山旭精密电路有限公司

Shanxu says it began in 2003, but its Shenzhen entity dates to 2021 and a Jiangxi one to 2020. The capability table says 1-40 layers; the profile says 1-60.

Shenzhen multilayerhdi

Founded 2021 · Evidence: Public sources reviewed · Reviewed 2026-11-19

View factory profile

Career Electronics (Kunshan)

嘉联益电子(昆山)有限公司

Career's Kunshan FPC plant shows 945 insured staff in one record, 1,433 in another and 4,000+ in job ads. Two records name different legal representatives.

Kunshan flexiblerigid flex

Founded 1998 · Evidence: Public sources reviewed · Reviewed 2026-11-12

View factory profile

Kangyuan Electronics (Dongguan)

东莞康源电子有限公司

Kangyuan's site says 1977 and 100,000 m2; the registry says 2008, RMB 700m capital and 1,875 insured staff. The Nantong plant is a separate company.

Dongguan hdimultilayer

Founded 2008 · Evidence: Public sources reviewed · Reviewed 2026-11-12

View factory profile

MFLEX (Suzhou Weixin Electronics)

苏州维信电子有限公司

MFLEX began in the US in 1984, listed on Nasdaq, and is now held through Singapore by DSBJ. The Suzhou entity has 7,256 staff; output spans three plants.

Suzhou flexiblerigid flex

Founded 2002 · Evidence: Public sources reviewed · Reviewed 2026-11-12

View factory profile

Multilayer PCB Technology (Shenzhen)

深圳市牧泰莱电路技术有限公司

Mutailai moved its registered address to an office tower in 2025 and reports 61 staff, while its site claims 1,200 employees and four manufacturing sites.

Shenzhen multilayerhdi

Founded 2005 · Evidence: Public sources reviewed · Reviewed 2026-11-12

View factory profile

Nantong Shennan Circuits

南通深南电路有限公司

Nantong Shennan's 2026 plating and laser-drill tenders document live lines; its registry shows 3,990 staff and RMB 5.313bn 2025 revenue.

Jiangsu multilayerhdi

Founded 2014 · Evidence: Public sources reviewed · Reviewed 2026-11-12

View factory profile

Shenlian Circuit (Shenzhen)

深圳市深联电路有限公司

Shenlian's site claims four plants and 780,000 m2 a month. The Shenzhen entity has 1,217 staff and only added board production to its scope in 2023.

Shenzhen multilayerhdi

Founded 2006 · Evidence: Public sources reviewed · Reviewed 2026-11-12

View factory profile

Stariver Circuit (Shenzhen plant)

深圳市星河电路股份有限公司

Stariver's site describes a Shenzhen plant with 500 staff and 25,000 m2 a month. A similarly named Shenzhen company has one employee and a trading licence.

Shenzhen multilayerrigid flex

Founded 2005 · Evidence: Public sources reviewed · Reviewed 2026-11-12

View factory profile

Benchuan Intelligent Circuit (Nanjing)

江苏本川智能电路科技股份有限公司

Benchuan lists four production bases, but its Zhuhai plant was bought from DSBJ in 2024 for RMB 39.5m. The registry shows one address.

Jiangsu rigidmultilayer

Founded 2006 · Evidence: Public sources reviewed · Reviewed 2026-11-11

View factory profile

Bolion Tech (Xiamen)

厦门市铂联科技股份有限公司(曾用名:厦门新福莱科斯电子有限公司)

Bolion quotes 16,000 m2/month on its company card and 30,000 on its hiring page, plus 16,700 from an old 200,000 m2/yr figure; three numbers, one plant.

xiamen flexiblerigid flex

Founded 2003 · Evidence: Public sources reviewed · Reviewed 2026-11-11

View factory profile

Bomin Electronics

博敏电子股份有限公司

Bomin 52-layer and 7th-order HDI figures belong to the Meizhou Inno-Chip plant, whose phase-1 handover slipped to the end of 2026.

Guangdong multilayerhdi

Founded 1994 · Evidence: Public sources reviewed · Reviewed 2026-11-11

View factory profile

CEE Technology (Zhongjing)

惠州中京电子科技股份有限公司

Zhongjing publishes 2026, 2027 and 2028 columns with sample and mass-production targets. Reading a number without its column quotes a board nobody builds.

Huizhou multilayerhdi

Founded 2000 · Evidence: Public sources reviewed · Reviewed 2026-11-11

View factory profile

CEE Yuansheng (Zhuhai)

珠海中京元盛电子科技有限公司

Yuansheng filed for a ChiNext IPO in 2017, then was acquired by CEE, renamed and re-registered. Its best capacity data is still that old filing.

Zhuhai flexiblerigid flex

Founded 2002 · Evidence: Public sources reviewed · Reviewed 2026-11-11

View factory profile

Chengzhiyi Circuit (Ji'an)

江西诚之益科技有限公司

The Ji'an entity registered in 2022, but the profile quotes 2008, 30,000 m2 and 100,000 m2 a month as group figures without naming a site.

ji-an aluminummetal based

Founded 2022 · Evidence: Public sources reviewed · Reviewed 2026-11-11

View factory profile

Cixi Qingbao Electronic Technology

慈溪市清宝电子科技有限公司

Cixi Qingbao publishes 3 mil line/space; a 2026 Ningbo government article says 0.15 mm. Both are in print, neither is dated, and output figures differ too.

Ningbo rigidmultilayer

Founded 2017 · Evidence: Public sources reviewed · Reviewed 2026-11-11

View factory profile

DBG Technology

惠州光弘科技股份有限公司

DBG runs over 100 SMT lines in 13 bases across eight countries and buys its PCBs. That makes it an assembly candidate, not a PCB enquiry.

Huizhou

Founded 1995 · Evidence: Public sources reviewed · Reviewed 2026-11-11

View factory profile

Dongguan Viafull Circuit Technology

东莞市玮孚电路科技有限公司

Viafull publishes UL file E466925, a checkable number, yet its own page quotes both 1-14 and 2-16 layers and 180 staff against 41 in filings.

Dongguan rigidmultilayer

Founded 2010 · Evidence: Public sources reviewed · Reviewed 2026-11-11

View factory profile

Dongguan Yuejie Circuit Technology

东莞市跃捷电路科技有限公司

Yuejie lists 64 layers, 10oz copper and IC substrates, yet its registry record shows three staff, four former names and a residential address.

Dongguan rigidmultilayer

Founded 2012 · Evidence: Public sources reviewed · Reviewed 2026-11-11

View factory profile

Ellington

广东依顿电子科技股份有限公司

Ellington publishes per-plant capacity, which is rare, and a certificate page whose latest expiry passed in 2025. Both matter for an automotive programme.

Zhongshan multilayerhdi

Founded 2000 · Evidence: Public sources reviewed · Reviewed 2026-11-11

View factory profile

Gaodeng Electronics (Yiyang)

湖南高登电子有限公司

The brand is a 1991 Hong Kong group, but Hunan Gaodeng is a domestic LLC held by natural persons; its 300,000 m2 a month is a target, not a verified output.

yiyang rigidmultilayer

Founded 2019 · Evidence: Public sources reviewed · Reviewed 2026-11-11

View factory profile

Goworld (CCTC)

广东汕头超声电子股份有限公司

Goworld PCB business sits inside a group that also makes LCDs and instruments. Three Shantou plants do different work, and only PCB counts as PCB output.

Guangdong multilayerhdi

Founded 1997 · Evidence: Public sources reviewed · Reviewed 2026-11-11

View factory profile

Huizhou Glorysky Electronics

惠州市特创电子科技股份有限公司

Glorysky's process table runs three year columns: 32 layers now, 36 in 2027 and 78 in 2028. Directories quote the last column as if it were today.

Huizhou rigidmultilayer

Founded 2010 · Evidence: Public sources reviewed · Reviewed 2026-11-11

View factory profile

JCD (Jingchengda)

深圳市精诚达电路科技股份有限公司

Jingchengda's Chinese profile claims 2,000 staff and two plants; its English page says 860 staff and one plant, fewer people than Taishan employs.

Shenzhen flexiblerigid flex

Founded 2003 · Evidence: Public sources reviewed · Reviewed 2026-11-11

View factory profile

Jiangsu Xiehe Electronics

江苏协和电子股份有限公司

The same 2025 turnover appears as RMB 979 million in Chinese and USD 145 million in English; audited FY2024 was RMB 853.5 million on 1.15 million m2.

Changzhou rigidmultilayer

Founded 2000 · Evidence: Public sources reviewed · Reviewed 2026-11-11

View factory profile

Jinhong Electronics (Ji'an)

江西锦宏电子有限公司

Jinhong's own pages give three plant areas, three headcounts and four layer counts, and call the site both a quick-turn shop and a volume factory.

ji-an rigidmultilayer

Founded 2020 · Evidence: Public sources reviewed · Reviewed 2026-11-11

View factory profile

JOVEPCB (Zhongfu Circuit)

深圳中富电路股份有限公司

JOVEPCB describes three production bases in Chinese and five in English, and quotes 34 layers that turn out to be a prototype limit, not a production one.

Shenzhen rigidmultilayer

Founded 2004 · Evidence: Public sources reviewed · Reviewed 2026-11-11

View factory profile

Kaifa (Shenzhen Kaifa)

深圳长城开发科技股份有限公司

Kaifa's filing publishes its credit code, 150-plus SMT lines and a 15,000 m2 cleanroom. It is an EMS group, and its plant list depends on which page you read.

Shenzhen

Founded 1985 · Evidence: Public sources reviewed · Reviewed 2026-11-11

View factory profile

King Brother (KINGBROTHER)

深圳市金百泽电子科技股份有限公司

Kingbrother books 100,000 PCB part numbers a year, while an older page on the same site implies 120,000. Neither figure is in square metres.

Shenzhen rigidmultilayer

Founded 1997 · Evidence: Public sources reviewed · Reviewed 2026-11-11

View factory profile

Kinwong

深圳市景旺电子股份有限公司

The 80-layer figure belongs to Kinwong high-layer-count line, not every plant. Seven bases, four product families, and one certificate you can verify.

Shenzhen multilayerhdi

Founded 1993 · Evidence: Public sources reviewed · Reviewed 2026-11-11

View factory profile

Ningbo Kehaoda Electronics

宁波科浩达电子有限公司

Kehaoda's one spec page quotes a 26:1 aspect ratio and 12 mil laser drills on a 4,500 m² site, while its 2024 environmental filing covers a single-sided line.

Ningbo rigidmultilayer

Founded 1990 · Evidence: Public sources reviewed · Reviewed 2026-11-11

View factory profile

Putian Technology PCB (formerly GCI Jiesai)

中电科普天科技股份有限公司

Putian Technology is a CETC-controlled listed group whose PCB arm runs two named bases. Its 88-layer claim sits beside a 40-layer design limit.

Guangdong rigidmultilayer

Founded 2000 · Evidence: Public sources reviewed · Reviewed 2026-11-11

View factory profile

Q&D Circuits (Qiangda)

深圳市强达电路股份有限公司

Q&D Circuits runs 50-layer builds and 10,000 part numbers a month from Shenzhen, but its own pages disagree on whether it employs 1,200 people or 1,350.

Shenzhen rigidmultilayer

Founded 2004 · Evidence: Public sources reviewed · Reviewed 2026-11-11

View factory profile

Reyhelm Electronics (Ji'an)

吉安市瑞鸿电子有限公司

The Chinese site says 150 staff and 50,000 m2 a month; the English site says 300 staff and 30,000 m2, and neither version is marked as current.

ji-an rigidmultilayer

Founded 2015 · Evidence: Public sources reviewed · Reviewed 2026-11-11

View factory profile

S&L Circuits (Sunly PCB)

深圳市深联电路有限公司

The same Shenzhen manufacturer appears as S&L Circuits, Sun&Lynn and Sunly PCB. Its certificate count differs by page, and its plants are split by board type.

Shenzhen multilayerhdi

Founded 2002 · Evidence: Public sources reviewed · Reviewed 2026-11-11

View factory profile

Shanghai Jiajietong (Fast-PCB)

上海嘉捷通电路科技股份有限公司

Jiajietong's Jiading address runs real etch lines - two plants plus a 2025 expansion - yet the same site prints four plant-area pairs and three age claims.

Shanghai rigidmultilayer

Founded 2004 · Evidence: Public sources reviewed · Reviewed 2026-11-11

View factory profile

Shengyi Electronics

生益电子股份有限公司

Shengyi publishes certificate expiry dates per plant, which most Chinese factories do not. Its capability table merges five product families.

Dongguan multilayerhdi

Founded 1985 · Evidence: Public sources reviewed · Reviewed 2026-11-11

View factory profile

Shennan Circuits (SCC)

深南电路股份有限公司

Shennan publishes one capability table for a group spanning five plants. Which column you quoted, sample or volume, decides whether the plant can build it.

Shenzhen multilayerhdi

Founded 1984 · Evidence: Public sources reviewed · Reviewed 2026-11-11

View factory profile

Shenzhen Lianshuo Precision Electronics

深圳市联硕精密电子有限公司

Lianshuo's site claims a 2002 founding and 2003 certifications, but its registry date is 2012 and its own certificate page lists only ISO9001.

Shenzhen rigidmultilayer

Founded 2012 · Evidence: Public sources reviewed · Reviewed 2026-11-11

View factory profile

Shenzhen Xinzhida Electronics

深圳市信志达电子有限公司

Xinzhida's site claims 1-40 layers and 30,000 m2 a month, but its registered entity has four staff and a wholesale-only business scope.

Shenzhen rigidmultilayer

Founded 2016 · Evidence: Public sources reviewed · Reviewed 2026-11-11

View factory profile

Sunshine Global Circuits

深圳明阳电路科技股份有限公司

Sunshine quotes capability in standard and advanced columns, and its own pages disagree on layer count. German and Malaysian plants change delivery options.

Shenzhen multilayerhdi

Founded 2001 · Evidence: Public sources reviewed · Reviewed 2026-11-11

View factory profile

Suntak Technology

崇达技术股份有限公司

Suntak publishes no capability table. Its layer and line figures exist only in annual-report prose, and substrate work sits in a partly owned subsidiary.

Shenzhen multilayerhdi

Founded 1995 · Evidence: Public sources reviewed · Reviewed 2026-11-11

View factory profile

Unitech PCB (Shanghai Zhanhua)

上海展华电子(南通)有限公司

Production moved to Nantong in 2020 - the Qingpu address is an office. The English site serves a stripped test page; layer counts come from a TPCA directory.

Shanghai rigidmultilayer

Founded 1997 · Evidence: Public sources reviewed · Reviewed 2026-11-11

View factory profile

Xunjiexing (JXPCB)

深圳市迅捷兴科技股份有限公司

Xunjiexing's site gives 2.8 million m2 a year, 2.6 million in an article, and 1.84 million when the four plants are added up one by one.

Shenzhen rigidmultilayer

Founded 2005 · Evidence: Public sources reviewed · Reviewed 2026-11-11

View factory profile

Zecheng Electronics (Shenzhen)

深圳市则成电子股份有限公司

The Shenzhen listed entity registers module and sensor production; FPC, HDI and SLP boards are made at its wholly owned Zhuhai subsidiary.

Shenzhen flexiblerigid flex

Founded 2003 · Evidence: Public sources reviewed · Reviewed 2026-11-11

View factory profile