Factory profile · Public sources reviewed

JCD (Jingchengda)

深圳市精诚达电路科技股份有限公司 · Shenzhen, Guangdong · Founded 2003 · NEEQ 874937 (2026-05-14; innovation tier from 2026-06-15)

Jingchengda's Chinese profile claims 2,000 staff and two plants; its English page says 860 staff and one plant, fewer people than Taishan employs.

A flex and rigid-flex specialist, not a rigid board supplier: single-sided FPC at volume from Shenzhen, double-sided and multilayer flex plus rigid-flex from Taishan. Right for display modules and camera harnesses. Wrong if you need a plain 4-layer FR-4, and thin on public disclosure because it only joined the NEEQ in 2026.

Identity and record

Only entries that were checked against a source are shown. A blank field means we have not confirmed it, not that it does not exist.
Registered name (Chinese) 深圳市精诚达电路科技股份有限公司
Registered name (English) Shenzhen Jingchengda Circuit Technology Co., Ltd.
Founded 2003
Listed NEEQ 874937 (2026-05-14; innovation tier from 2026-06-15)
Headquarters Shenzhen, Guangdong
Production sites Shenzhen · Taishan (Jiangmen)
Official website https://www.jcdfpc.com/
Evidence levelPublic sources reviewed
Last reviewed2026-11-11
Registered entity and published production sites Registered entity JCD (Jingchengda) and 2 named production sites, from the disclosures cited on this page. PUBLISHED RECORD JCD (Jingchengda) 深圳市精诚达电路科技股份有限公司 Founded 2003 · NEEQ 874937 (2026-05-14; innovation tier f… Shenzhen Site 1 Taishan Jiangmen Source: disclosures cited on this page
Entity and footprint map. JCD (Jingchengda) and the production sites named in the disclosures cited above.

Eight hundred and sixty people, or two thousand

The Chinese profile says 2,000 employees, 180 mu of land, two production bases and more than 60 patents. The English profile says 860 employees, 77 mu, one base and 26-plus patents. Both pages are on the same domain, both are labelled as company introductions, and the company offers no note explaining the gap.

The gap is not small. Two thousand against 860 is a factor of 2.3. Land is 180 mu against 77, a factor of 2.3 as well. Patents are 60-plus against 26-plus, again roughly 2.3.

A consistent ratio across three unrelated quantities suggests one of two things: the English page was translated from a version written around 2013 and never updated, or it describes the Shenzhen site alone while the Chinese text describes the group.

The English page cannot be describing the group

Here the outside record settles it. Public reporting on the Taishan plant puts it at roughly 1,300 employees on its own, on nearly 180 mu, with more than RMB 600 million invested and production starting in 2012.

Eight hundred and sixty is fewer people than Taishan alone is reported to employ. So the English profile is not a group total, whatever it says. It is either the Shenzhen site or a stale figure. The same test applies to the 180 mu: that number matches Taishan’s footprint, so the Chinese page’s “180 mu” is very likely the Taishan site’s land reported as if it were the group’s, while its 2,000 headcount is a group number.

A buyer reading only the English page would conclude this is a small single-site flex shop. It is not.

What the Taishan plant is measured at

Taishan runs at 80,000 m² a month according to 2026 reporting, which annualises to about 960,000 m² of flex and rigid-flex. The same figure appears as 20,000 m² a month in an older encyclopaedia entry citing 2023 data — a fourfold difference with no stated basis for either.

The two numbers are probably measuring different things: nameplate versus output, or one workshop versus the site. Either way, for a flex programme the honest request is monthly panel output for the last quarter by product type, because flex capacity quoted in square metres hides the real constraint, which is the number of coverlay laminations and the plating of 50 µm vias.

What the site does publish precisely is process detail, and it is good detail: 35/35 µm on single-sided, 40 µm minimum board thickness, 0.1 mm mechanical and 35 µm laser holes on double-sided, 50/50 µm ACF finger pitch, 3-6 layers on multilayer flex with 50 µm microvias, and rigid-flex at six layers or fewer with 75 µm blind vias and an 8:1 aspect ratio.

Thirty microns by design, thirty-five by production

The single-sided product page contradicts itself in a way that is worth understanding rather than dismissing. Its feature list says the design capability is 30/30 µm line and space. Its specification table says 35/35 µm. Same page, same product.

The likely reading is that 35/35 is what the line holds in production and 30/30 is what the process can do on a good day. That is normal. What is not normal is publishing both without labels, because a customer quoting from the feature list will design to 30/30 and then discover the price assumes 35/35.

Ask which number the DFM check will use. On a display module with a fine-pitch bonding finger, that 5 µm decides yield.

A flex house that will not quote you a rigid board

Rigid boards appear on this site only as the stiffener section of a rigid-flex build. The company does not sell standalone rigid PCB, and its multilayer flex range stops at six layers in mass production.

That is a clean position and it saves time: do not send a 4-layer FR-4 quotation request, and do not expect a 10-layer rigid-flex. What it does offer is the thing flex specialists are actually good at — single-sided volume work from Shenzhen for optical drive and backlight applications, and double-sided and multilayer flex from Taishan for phone modules and automotive and industrial displays.

The automotive credential is specific rather than general: a provincial manufacturing single-champion designation for 2025-2027 covering double-sided FPC for front-install automotive display modules. A named application with a named award is worth more than a page of logos.

What is not established

No unified social credit code, no confirmed employee count, no per-plant capacity from the company itself, no certificate numbers, no customer names. The group only listed on the NEEQ in May 2026 and moved to the innovation tier in June, so there is no long audit trail of disclosed plant data. A 500,000 m² a year flex expansion appears only as an environmental-approval notice, with no commissioning or acceptance record. And the 80,000 versus 20,000 m² question at Taishan has never been answered in public.

Published limits

Every value below is quoted as published by the company or a public record.

ParameterValue as published
Single-sided FPC minimum line and space, production 35 um / 35 um
Single-sided FPC minimum board thickness 40 um
Double-sided FPC minimum hole 0.1 mm mechanical, 35 um laser
Double-sided FPC ACF finger pitch 50 um / 50 um
Multilayer FPC mass-production layer count 3-6 layers
Multilayer FPC minimum microvia 50 um
Multilayer FPC outer minimum line and space 50 um / 50 um
Rigid-flex mass-production layer count 6 layers or fewer
Rigid-flex minimum blind via 75 um
Rigid-flex through-hole aspect ratio 8:1 or less
Rigid-flex hard-board thickness 0.2-1.6 mm
Thirty by design, thirty-five in production Bar chart of 2 published figures in µm minimum line and space, single-sided FPC. The feature list says 30/30 µm and the specification table on the same page says 35/35 µm. The larger figure is the production hold, not an improvement; ask which one the DFM check uses. Feature list 30 µm design capability as printed Spec table 35 µm production specification as printed
Thirty by design, thirty-five in production. µm minimum line and space, single-sided FPC. The feature list says 30/30 µm and the specification table on the same page says 35/35 µm. The larger figure is the production hold, not an improvement; ask which one the DFM check uses. Source: Single-sided FPC product page, feature list and spec table.

Certifications on record

A certificate covers a legal entity and a site, not a brand. Scope and expiry are recorded where published.

StandardWhat the record shows
IATF 16949:2016 Stated as compliant on the qualifications page; no certificate number, certified site or validity date
ISO 9001:2015 Described as the basis for the QC 080000 system; no number and no expiry published
ISO 14001 / ISO 45001 Environmental and occupational health systems listed without numbers or validity dates
IECQ QC 080000:2017 Hazardous-substance management; only the standard version is given, no certificate number
ISO 50001 / ISO 14064 Energy and carbon management listed under social responsibility; no body and no validity date
UL Company history says UL was obtained in 2005; no UL file number, so coverage cannot be checked

Ask this factory for a quote

Send one technical package and compare the replies. The RFQ checklist lists what to include; the quote specifications say which parameters change the price for the process you are buying.

Request a quote

Source and review conventions are described in how we verify. Corrections can be sent through the contact channel.