Factory profile · Public sources reviewed

JOVEPCB (Zhongfu Circuit)

深圳中富电路股份有限公司 · Shenzhen, Guangdong · Founded 2004 · SZSE ChiNext 300814 (2021-08-12)

JOVEPCB describes three production bases in Chinese and five in English, and quotes 34 layers that turn out to be a prototype limit, not a production one.

A mid-size listed builder with an unusually wide board menu - rigid, HDI, rigid-flex, aluminium and PTFE antenna - and real automotive volume behind it. Best for buyers who need several board families from one supplier. Check which of the plants will run the job and treat 34 layers as a sample run, not a production commitment.

Identity and record

Only entries that were checked against a source are shown. A blank field means we have not confirmed it, not that it does not exist.
Registered name (Chinese) 深圳中富电路股份有限公司
Registered name (English) Shenzhen Jove Enterprise Limited
Founded 2004
Listed SZSE ChiNext 300814 (2021-08-12)
Headquarters Shenzhen, Guangdong
Production sites Shenzhen · Jiangmen (Heshan)
Official website https://www.jovepcb.com/
Evidence levelPublic sources reviewed
Last reviewed2026-11-11
Registered entity and published production sites Registered entity JOVEPCB (Zhongfu Circuit) and 2 named production sites, from the disclosures cited on this page. PUBLISHED RECORD JOVEPCB (Zhongfu Circuit) 深圳中富电路股份有限公司 Founded 2004 · SZSE ChiNext 300814 (2021-08-12) Shenzhen Site 1 Jiangmen Heshan Source: disclosures cited on this page
Entity and footprint map. JOVEPCB (Zhongfu Circuit) and the production sites named in the disclosures cited above.

Three production bases in Chinese, five in English

The Chinese company profile names three: Shajing in Shenzhen, Songgang in Shenzhen, and Heshan in Jiangmen. The English About page says five, split as two in Shenzhen and three in Jiangmen, and adds a plant planned in Thailand.

Both pages belong to the same company and neither is marked as older. The difference may be a definition — three legal production entities against five buildings — but nothing on either site says so. No plant-level capacity is published on either version, which makes the disagreement impossible to settle from outside.

Why it matters is boring but real. An IATF 16949 audit, a PPAP submission and a customer audit are all site-specific. If your purchase order says “Shenzhen” and the site list is fuzzy, you do not know which building is being certified for your part.

Twenty-four you can order, thirty-four you cannot

The multilayer page draws the line clearly: 24 layers in mass production, 34 in prototype. The company profile then compresses both into “2 to 34 layers”, which reads like a production range and is not one.

The same page has a second version of the same problem. Its HDI table shows two columns marked 4-24 and 4-34 without saying which is production, while the body text says any-layer HDI goes to 14 layers. Three numbers — 14, 24, 34 — for one capability family.

Thick copper has the same shape. The technical notes say 10 oz on outer layers and 12 oz on inner; the parameter table says 6 oz production and 12 oz prototype. On a heavy-copper design the difference between 6 and 12 is not academic, it is a different plating line and a different etch.

A buyer should read every layer and copper figure on this site as a maximum-ever-built, then ask for the production limit in writing. The prototype ceiling is genuinely useful if you are at the sample stage; it is worthless as a supply commitment.

The name on the English site is a Hong Kong company

The English site presents itself as JOVEPCB Enterprise Ltd. The 2025 annual report shows JOVEPCB ENTERPRISE LIMITED as a wholly owned Hong Kong subsidiary set up by the Heshan plant, while the listed issuer is Shenzhen Zhongfu Circuit Co., Ltd.

This is common and mostly harmless: the HK entity is the commercial arm that invoices overseas customers. But it changes what you are contracting with. A purchase contract signed with the Hong Kong company is not a contract with the listed manufacturer, and the listed entity’s audited financials, guarantees and disclosure obligations attach to the parent, not the trading arm.

Ask which entity appears on the invoice and which appears on the certificate of conformity. If they differ, say so in the PO.

Where the money comes from

Revenue in 2025 was RMB 1.879 billion with RMB 29.14 million of net profit attributable to shareholders. Automotive electronics contributed RMB 307 million, 18.27 per cent of main-business revenue, up about 21.6 per cent year on year. Headcount at year end was 3,321, of which 1,289 at the parent and 2,032 at subsidiaries.

Two readings follow. The automotive share is growing but is not the majority of the business, so a car programme will sit alongside industrial and consumer work on the same lines. And the net margin, at roughly 1.5 per cent of revenue, is thin even by PCB standards — the kind of number that makes year-on-year price-downs painful for the supplier and therefore worth negotiating early rather than late.

R&D spending was RMB 104.7 million, 5.57 per cent of revenue, all expensed. For a company this size that is a serious engineering budget, and it is consistent with the width of the board menu below.

Six board families under one roof

Rigid multilayer to 24 layers in production. Any-layer HDI to 14 layers with 40 µm lines, 50 µm laser vias and 0.35 mm BGA pitch. Rigid-flex to 24 layers total with one to six layers in the flex section. Metal-based boards from 2 to 8 layers with thermal conductivity to 10 W/m·K. Aluminium substrates. And PTFE antenna boards, quoted at 20,000 m² a month with delivered 5G antenna panels up to seven layers and 1,200 mm long.

That combination is the actual reason to shortlist this factory. Very few Chinese plants will quote an aluminium LED board, a 14-layer any-layer HDI and a PTFE antenna in the same week. If your product family spans those, consolidating suppliers has real value in audit cost.

The caution is depth. A plant that does six families will not be the best in the world at any of them, and the PTFE line in particular is a different material system with different drilling and plating behaviour. Ask for the specific stack-ups built in the last year in the family you care about.

What is not established

No unified social credit code, no per-plant capacity, no customer names and no certificate numbers. The Thailand plant is described as planned in English while the Chinese site already shows a page for it; commissioning status and capacity are not disclosed. The 1 million m² a year project funded by the IPO has drawn RMB 476 million of investment to date, but no page states how much of that capacity is qualified and shipping.

Published limits

Every value below is quoted as published by the company or a public record.

ParameterValue as published
Multilayer maximum, mass production 24 layers
Multilayer maximum, prototype 34 layers
Thick copper, mass production and prototype 6 oz and 12 oz
Maximum plated through-hole aspect ratio 20:1
Impedance control tolerance +/-8%
HDI any-layer stack-up up to 14 layers
HDI minimum line width and spacing 40 um / 40 um (1.6/1.6 mil)
HDI minimum laser via 50 um
HDI minimum BGA pitch 0.35 mm
Rigid-flex maximum, mass production 24 layers total
Metal-based board range 2-8 layers, thermal conductivity to 10 W/m-K
PTFE antenna board capacity 20,000 m2 a month
Layer ceilings that belong to different board families Bar chart of 4 published figures in layers, from the company capability tables. Mass-production and prototype ceilings for multilayer, HDI any-layer and rigid-flex. The company profile compresses them into a 2-34 layer range; the prototype figure is a sample limit. Multilayer vol 24 layers mass production maximum Multilayer proto 34 layers prototype maximum HDI any-layer 14 layers body text of the HDI table Rigid-flex vol 24 layers mass production, total layers
Layer ceilings that belong to different board families. layers, from the company capability tables. Mass-production and prototype ceilings for multilayer, HDI any-layer and rigid-flex. The company profile compresses them into a 2-34 layer range; the prototype figure is a sample limit. Source: company multilayer, HDI and rigid-flex capability tables.

Certifications on record

A certificate covers a legal entity and a site, not a brand. Scope and expiry are recorded where published.

StandardWhat the record shows
ISO 9001 / 14001 / 45001 Listed in the 2025 annual report; no certificate numbers, sites or validity dates disclosed
IATF 16949 Named in the 2025 annual report for automotive supply; scope and expiry not given
ISO 13485 Medical device system listed in the annual report without certificate number or scope
QC 080000 / ISO 27001 / ISO 50001 Hazardous-substance, information-security and energy systems listed in the annual report
RBA / CQC / UL All three named in the annual report; no UL file number and no CQC certificate number published

Ask this factory for a quote

Send one technical package and compare the replies. The RFQ checklist lists what to include; the quote specifications say which parameters change the price for the process you are buying.

Request a quote

Source and review conventions are described in how we verify. Corrections can be sent through the contact channel.