Factory profile · Public sources reviewed

Shennan Circuits (SCC)

深南电路股份有限公司 · Shenzhen, Guangdong · Founded 1984 · SZSE 002916, listed 2017

Shennan publishes one capability table for a group spanning five plants. Which column you quoted, sample or volume, decides whether the plant can build it.

Shortlist Shennan for a high-layer-count backplane, a thick-copper power board or a package substrate, and accept a state-owned supplier in exchange for Nadcap and AS9100 on record. Do not route a five-day prototype here; the quoting desk is organised around square metres and qualification, not around single panels.

Identity and record

Only entries that were checked against a source are shown. A blank field means we have not confirmed it, not that it does not exist.
Registered name (Chinese) 深南电路股份有限公司
Registered name (English) Shennan Circuits Co., Ltd.
Founded 1984
Listed SZSE 002916, listed 2017
Headquarters Shenzhen, Guangdong
Production sites Shenzhen · Wuxi (Jiangsu) · Nantong (Jiangsu) · Guangzhou (IC substrate) · Thailand
Official website https://www.scc.com.cn
Evidence levelPublic sources reviewed
Last reviewed2026-11-11
Registered entity and published production sites Registered entity Shennan Circuits (SCC) and 4 named production sites, from the disclosures cited on this page. PUBLISHED RECORD Shennan Circuits (SCC) 深南电路股份有限公司 Founded 1984 · SZSE 002916, listed 2017 Shenzhen Site 1 Wuxi Jiangsu Nantong Jiangsu Guangzhou IC substrate +1 more sites named in the profile Source: disclosures cited on this page
Entity and footprint map. Shennan Circuits (SCC) and the production sites named in the disclosures cited above.

The capability table has two columns, and they are not the same product

Shennan publishes its process limits as a mass-production column and a sample column. Almost every headline number on the page belongs to the second one. 120 layers is a sample figure; mass production is stated as 2–68 layers. 14 mm board thickness, 2.0/2.0 mil inner-layer traces, a 0.050 mm laser drill and 30 oz copper repeat the pattern.

This is not a marketing trick, it is how the factory plans capacity. Samples are built on pilot lines where a technician can stop the line; volume runs on lines that are measured by yield and cycle time. A drawing that quotes the sample column and then moves to 5,000 m² will be re-quoted, and the re-quote will be worse than if the enquiry had started from the volume column. Write the annual quantity on the first page of the RFQ, not in a follow-up email.

The plant list on the website is older than the plant list in the filing

The company profile names three production bases: Shenzhen, Wuxi and Nantong. The 2025 annual report adds Guangzhou (package substrate) and a Thailand plant that started production in the second half of 2025, and records the Nantong phase-4 project reaching production in the same period. A buyer who builds a supplier map from the website will miss two sites, one of which is the only place certain substrate work can run.

Plant assignment matters here more than at a single-site factory. The group is controlled by 深天科技控股 and ultimately by AVIC, a central state-owned enterprise, and the operating companies are separate legal persons: 无锡深南, 南通深南, 广州广芯, 泰兴电路 in Thailand. PCBA sits in 天芯互联, held at 90.20%. Ask which legal entity will appear on the contract and which site the process traveller names.

Package substrate is a separate sales conversation

Substrate revenue was RMB 4.148 billion in 2025, 17.54% of the group total and up 30.80% year on year, with the Guangzhou phase-1 project still ramping at year-end. Substrate capability is governed by different design rules, different metrology and different qualification cycles than a PCB. An enquiry for a CSP or FCBGA substrate that enters through a PCB sales channel tends to be priced as a fine-line PCB, which produces a number that cannot be delivered.

Certification scope is narrower than the logo wall

IATF 16949 and ISO 9001 carry a stated expiry of 2027-06-12. ISO 13485 is listed for PCBA only, so it supports a claim about assembly, not about bare board. IECQ QC080000 is displayed with an expiry of 2025-12-11, which had already passed when this page was reviewed. AS9100 and Nadcap appear as named systems without certificate numbers, and the aerospace qualification that a programme manager will ask for is a Nadcap scope statement, not a logo.

Four questions that change the quote

Ask Why it changes the number
Which site, and which legal entity signs? Group capability is not plant capability; the contract counterparty determines who carries material liability
Is this a sample-column or volume-column process? Layer count, copper and drill rules differ between the two columns by a wide margin
Which certificate covers this site and scope? IATF and ISO 13485 are held per entity and per scope; the PCBA certificate does not cover a bare board
Who owns the substrate enquiry? Substrate and PCB are priced and qualified by different teams

What this profile does not establish

No UL file number is published on the site or in the annual report, so the UL listing has to be checked in UL Product iQ against the legal entity. There is no per-plant capability split: the published table merges Shenzhen, Wuxi and Nantong into one set of numbers, and nothing on the public record says which plant holds which limit. Employee counts and per-plant capacity in square metres are also not disclosed. Everything above comes from the company’s own pages and its filings, which is why this profile is graded as public sources reviewed rather than independently reviewed.

Published limits

Every value below is quoted as published by the company or a public record.

ParameterValue as published
Layer count, mass production / sample 2–68 layers / up to 120 layers
Max board thickness, mass production / sample 10 mm / 14 mm
Min line width and spacing, inner layer 2.2/2.2 mil / 2.0/2.0 mil
Laser drill diameter, mass production / sample 0.10 mm / 0.050 mm
Max finished size, single board / backplane 850 × 570 mm / 1250 × 570 mm
Aspect ratio, single board / backplane 20:1 / 25:1
Max copper thickness, mass production / sample 6 oz / 30 oz
Impedance tolerance ±7% mass production, ±5% sample
High-frequency laminates listed RO3003, RO3006, RO4350B, RO4360G2, RO4835, CLTE, RF35
The sample column is not the volume column Bar chart of 2 published figures in layers, upper bound of each published column. Mass production is 2-68 layers; 120 is a sample figure. The columns describe different products, so the bars show the gap, not options. Thickness, trace, drill and copper rows repeat the split and are excluded. Mass production 68 layers 2-68 layers, the orderable range Sample 120 layers sample column, not a volume spec
The sample column is not the volume column. layers, upper bound of each published column. Mass production is 2-68 layers; 120 is a sample figure. The columns describe different products, so the bars show the gap, not options. Thickness, trace, drill and copper rows repeat the split and are excluded. Source: Published capability table, mass-production and sample columns.

Certifications on record

A certificate covers a legal entity and a site, not a brand. Scope and expiry are recorded where published.

StandardWhat the record shows
IATF 16949 Certificate shown with expiry 2027-06-12
ISO 9001 Certificate shown with expiry 2027-06-12
ISO 13485 Listed as ISO 13485 (PCBA), expiry 2027-06-25. The scope is assembly, not bare board
AS9100 Named among the certified systems; no certificate number published
Nadcap Named as a certified system; the 2011 CSR dates it to 2009
IECQ QC080000 Certificate shown with expiry 2025-12-11, i.e. lapsed when this page was reviewed

Ask this factory for a quote

Send one technical package and compare the replies. The RFQ checklist lists what to include; the quote specifications say which parameters change the price for the process you are buying.

Request a quote

Source and review conventions are described in how we verify. Corrections can be sent through the contact channel.