Goworld (CCTC)
广东汕头超声电子股份有限公司 · Guangdong · Founded 1997 · SZSE 000823, listed 1997
Goworld PCB business sits inside a group that also makes LCDs and instruments. Three Shantou plants do different work, and only PCB counts as PCB output.
Shortlist CCTC for a high-density multilayer or an any-layer HDI board with a mobile or automotive destination, and for a buyer who wants a state-linked supplier with a long certification history. Read the group and the PCB subsidiary as two different companies: the group's size says nothing about the plant's capability.
Identity and record
| Registered name (Chinese) | 广东汕头超声电子股份有限公司 |
|---|---|
| Registered name (English) | Guangdong Goworld Co., Ltd. |
| Founded | 1997 |
| Listed | SZSE 000823, listed 1997 |
| Headquarters | Guangdong |
| Production sites | Shantou (three PCB plants: 印制板公司, 二厂, 三厂) |
| Official website | https://www.cctc-pcb.com |
| Evidence level | Public sources reviewed |
| Last reviewed | 2026-11-11 |
The group is not the factory
Goworld is a diversified listed company: printed circuit boards, liquid crystal displays, copper-clad laminate and ultrasonic instruments. Its PCB business is run by three Shantou subsidiaries, each 75% held and each a joint venture with a Hong Kong partner.
That structure matters when you read a revenue figure or a headcount. A number describing the group is not a number describing the plant, and a directory that merges them is telling you about a conglomerate when you asked about a board supplier. The PCB-only figures are the ones in this profile.
Three plants, three jobs
The 2025 annual report sets out the division of labour. 印制板二厂 makes high-density multilayer boards. 印制板公司, on Dongxia North Road, makes double-sided and multilayer boards. 印制板三厂 makes double-sided and multilayer boards, HDI build-up boards and IC substrates.
That is a more useful map than most groups provide, and it points to where a given design belongs. A 7+2+7 any-layer HDI is plant three work. A 20-layer high-density board is plant two. A conventional 6-layer board could be either, and the quote should say which.
Capability is published in two columns, which is honest
The CCTC process table separates mass production from trial run: 32 layers against 42, 40/40 µm against 35/35 µm, a 65 µm laser drill against 50 µm, 7+2+7 against 8+2+8 any-layer, 20:1 against 22:1.
Only one column is a promise. The trial-run column describes what engineering has demonstrated, and it is useful for knowing where the factory is heading, but a purchase order is built in the other column. Ask which column your stack-up falls into before you promise a customer a 40-layer board.
The customer mix explains the capability
A bond rating report discloses the 2025 PCB customer split: mobile internet about 50%, automotive electronics about 33%, smart home and smart manufacturing 7.5%, and industrial control and medical 7%. Named mobile-internet customers include ZTE, Fibocom, H3C and Datang.
That mix explains the numbers. Any-layer HDI at 7+2+7 with a 65 µm laser via is a smartphone-class capability, and the mobile share is what justifies it. It also explains why the layer count stops at 32 in production: the customers are not asking for telecom backplanes. If your design is a 40-layer backplane, the answer will involve the trial-run column, which is a different conversation.
Recertification dates instead of logos
The quality page lists recertification years and bodies: IATF 16949 recertified by TÜV Rheinland in 2023, ISO 9001 by LRQA in 2024, ISO 13485 by TÜV Rheinland in 2022, ISO 14001 audited in 2022 with CNAS and UKAS marks.
Dates and bodies are more useful than logos, even without certificate numbers, because they tell you the certificate cycle is being managed. UL is asserted with a 1986 date on the company timeline and no file number, so that one still needs a check in UL Product iQ.
How to use this profile
Send the stack-up, the layer count, the target aspect ratio and the annual quantity. Ask which of the three plants will build it, and ask for the certificate reference that covers that plant rather than the group.
Two questions are worth adding for an automotive programme: whether the 33% automotive share includes safety-critical boards or only infotainment, and whether the Thai joint venture being set up with SVI Public Company will take any of the volume. A plant still under construction cannot be qualified by a first article.
What is not established
No UL file number is published. No monthly capacity is given for any plant; the 1.4 million m² figure is a group annual number covering double-sided, multilayer and HDI. Layer, line and drill figures are CCTC-wide process capabilities rather than per-plant certifications, and customer volumes are not disclosed beyond the percentage split in the rating report.
Published limits
Every value below is quoted as published by the company or a public record.
| Parameter | Value as published |
|---|---|
| Layer count, mass production / trial run | 32 layers / 42 layers |
| Minimum line width and space, mass production | 40/40 µm, or 35/35 µm in trial run |
| Minimum laser drill | 65 µm in production, 50 µm in trial run |
| Any-layer HDI build-up | 7+2+7 mass production, 8+2+8 trial run |
| Finished board thickness | 0.1–6.0 mm mass production, to 6.5 mm trial |
| PTH aspect ratio | 20:1 mass production, 22:1 trial |
| Laminates named | FR-4, Megtron, Rogers, heavy copper |
| Annual PCB capacity, double-sided, multilayer and HDI | 1,400,000 m² per year |
| Actual output and sales, 2025 | 1,403,250 m² produced (+9.03%), 1,405,326 m² sold (+11.06%) |
Certifications on record
A certificate covers a legal entity and a site, not a brand. Scope and expiry are recorded where published.
| Standard | What the record shows |
|---|---|
| UL | Certification dated 1986 on the company timeline; no file number published |
| IATF 16949:2016 | Recertified in 2023 by TÜV Rheinland |
| ISO 9001:2015 | Recertified in 2024 by LRQA |
| ISO 13485:2016 | Recertified in 2022 by TÜV Rheinland |
| ISO 14001:2015 | 2022 audit by Huaxia, CNAS and UKAS marks |
Ask this factory for a quote
Send one technical package and compare the replies. The RFQ checklist lists what to include; the quote specifications say which parameters change the price for the process you are buying.
Source and review conventions are described in how we verify. Corrections can be sent through the contact channel.