Factory profile · Public sources reviewed

Bomin Electronics

博敏电子股份有限公司 · Guangdong · Founded 1994 · SSE 603936, listed 2015

Bomin 52-layer and 7th-order HDI figures belong to the Meizhou Inno-Chip plant, whose phase-1 handover slipped to the end of 2026.

Bomin is worth a shortlist for a high-layer-count board, a metal-base or high-frequency special board, or an AMB ceramic carrier, because the group covers all three inside different plants. Take the Inno-Chip numbers as a plan rather than a capability: the phase-1 handover date moved to December 2026.

Identity and record

Only entries that were checked against a source are shown. A blank field means we have not confirmed it, not that it does not exist.
Registered name (Chinese) 博敏电子股份有限公司
Registered name (English) Bomin Electronics Co., Ltd.
Founded 1994
Listed SSE 603936, listed 2015
Headquarters Guangdong
Production sites Meizhou (HQ and largest base) · Shenzhen · Yancheng (Jiangsu)
Official website https://www.bominelec.com
Evidence levelPublic sources reviewed
Last reviewed2026-11-11
Registered entity and published production sites Registered entity Bomin Electronics and 3 named production sites, from the disclosures cited on this page. PUBLISHED RECORD Bomin Electronics 博敏电子股份有限公司 Founded 1994 · SSE 603936, listed 2015 Meizhou HQ and largest b… Shenzhen Site 2 Yancheng Jiangsu Source: disclosures cited on this page
Entity and footprint map. Bomin Electronics and the production sites named in the disclosures cited above.

The headline capability belongs to a plant still being handed over

52 layers, a 30:1 through-hole aspect ratio and seventh-order HDI are the numbers a buyer will see first, and they are all attributed to the Meizhou Inno-Chip plant. That plant was commissioned progressively during 2025, and the 2025 annual report moved the phase-1 “ready for use” date to 31 December 2026.

Both facts can be true: lines can run while a project is still formally incomplete. But a buyer quoting 52 layers should know the difference between a line that has produced a sample and a plant that has completed its handover, because the second is what supports a stable production schedule.

Ask for the first-article record from the specific line, not from the plant. That is the only way to tell which stage the capability is at.

Three plants with genuinely different jobs

Meizhou, about 80 mu, runs a double-sided and multilayer plant, a conventional HDI plant, a high-end HDI plant, an FPC plant and a supporting SMT line. Shenzhen makes special boards: metal-base, high-frequency, thick multilayer up to 6.0 mm, and double-sided boards up to 2,000 mm long. Yancheng Dafeng, 232 mu, has a phase 1 for high-multilayer rigid boards and high-end HDI.

That split is the most useful part of this profile. A 2,000 mm long board is a Shenzhen question. A 30:1 aspect ratio is a Meizhou question. A high-volume 16-layer board is a Yancheng question. A single capability table for the group would hide all three.

AMB ceramic is the differentiated product

The group states that Shenzhen Bomin was an early domestic mass producer of AMB ceramic carrier boards and describes itself as second in AMB capacity in China. Yancheng has mass-produced HDI since 2011 and holds any-layer process technology.

AMB carriers are used in power modules, and the supplier base for them in China is small. If your design needs a ceramic carrier, this is a shorter list than the general PCB market, and the qualification is different: thermal cycling, copper thickness and substrate supplier all matter more than layer count.

Customers, and what the list implies

The 2025 annual report names end customers including Huawei, iFLYTEK, Hesai, Sensata, ZTE, Samsung, Jabil, Goertek, BYD, Accelink, Flex, GAC, Faurecia, Foxconn, Lenovo, Amazon, Hyundai MOBIS, Osram and Tianma.

That is a spread across consumer, automotive, industrial and optical communication, which is consistent with a factory that does special boards rather than one that specialises. For a buyer, breadth cuts both ways: more process experience, less depth in any one of them.

How to use this profile

Send the stack-up with the aspect ratio, the board length and thickness, and the copper weight. State the plant you expect, and ask the factory to confirm it.

For the Inno-Chip capability, ask for a dated process capability sheet and a first-article report from the line that would run the order. For AMB work, ask which plant and which ceramic supplier, and ask for thermal cycling data rather than a capability claim.

What is not established

The UL file number is not published. No monthly capacity is given for any plant; only the Inno-Chip phase-1 figure of 360,000 m² per year and the park-level plan of 3.6 million m² per year. The 52-layer, 30:1 and seventh-order HDI figures are plant capability claims rather than volume-production certifications, and customer volumes by plant are not public.

Published limits

Every value below is quoted as published by the company or a public record.

ParameterValue as published
Maximum layer count, Meizhou Inno-Chip plant 52 layers
Through-hole aspect ratio, Inno-Chip plant 30:1
HDI build-up, Inno-Chip plant 7th order
Output, Inno-Chip phase 1 360,000 m² per year
Planned capacity, Inno-Chip park, all phases 3,600,000 m² per year
Board thickness, Shenzhen plant Up to 6.0 mm on high-layer-count boards
Double-sided extra-long board, Shenzhen plant Up to 2,000 mm
Jiangsu plant site 232 mu at Yancheng Dafeng; phase 1 makes high-multilayer boards and high-end HDI

Certifications on record

A certificate covers a legal entity and a site, not a brand. Scope and expiry are recorded where published.

StandardWhat the record shows
IATF 16949:2016 Listed per plant on tabs for Meizhou, Shenzhen and Jiangsu
AS9100D Aerospace quality system, shown among the certificates
ISO 13485:2016 Medical device quality system
ISO 9001:2015 Listed per plant
ISO 14001 and ISO 45001 Environment and occupational health, listed on the same page
UL Product certification listed; file number not published

Ask this factory for a quote

Send one technical package and compare the replies. The RFQ checklist lists what to include; the quote specifications say which parameters change the price for the process you are buying.

Request a quote

Source and review conventions are described in how we verify. Corrections can be sent through the contact channel.