Factory profile · Public sources reviewed

Cixi Qingbao Electronic Technology

慈溪市清宝电子科技有限公司 · Ningbo, Zhejiang · Founded 2017 · Not listed

Cixi Qingbao publishes 3 mil line/space; a 2026 Ningbo government article says 0.15 mm. Both are in print, neither is dated, and output figures differ too.

A single and double-sided appliance board shop with 50-plus machines, AOI and electrical test, and a municipal article behind its output. Send it volume appliance and flex work. Do not read its 8-layer carrier page as capability: no spec table, no layer ceiling, and its line claim is twice as fine as the government's.

Identity and record

Only entries that were checked against a source are shown. A blank field means we have not confirmed it, not that it does not exist.
Registered name (Chinese) 慈溪市清宝电子科技有限公司
Registered name (English) Cixi Qingbao Electronic Technology Co., Ltd.
Founded 2017
Listed Not listed
Headquarters Ningbo, Zhejiang
Production sites Cixi (Chongshou, Qianwan New Area)
Official website http://www.qingbaodz.cn/
Evidence levelPublic sources reviewed
Last reviewed2026-11-11
Registered entity and published production sites Registered entity Cixi Qingbao Electronic Technology and 1 named production sites, from the disclosures cited on this page. PUBLISHED RECORD Cixi Qingbao Electronic Technology 慈溪市清宝电子科技有限公司 Founded 2017 · Not listed Cixi Chongshou, Qianw… Source: disclosures cited on this page
Entity and footprint map. Cixi Qingbao Electronic Technology and the production sites named in the disclosures cited above.

Three output figures, three different frames of reference

The Ningbo municipal bureau of economy and information technology, in a September 2026 article, puts Qingbao at 360,000 m² a year or more. The Cixi small and medium enterprise association, after a plant visit, recorded monthly capacity above 40,000 m² — which annualises to roughly 480,000 m². The company’s own profile offers neither number. It offers a 16,000 m² building on a 7,500 m² site, 130 to 200 staff, 25 of them in R&D.

None of the three is necessarily false. They are not comparable either. An annual figure in a government promotion article is usually a nameplate number agreed with the statistics bureau. A monthly figure in an association visit report is what the host said across the conference table. Building area says how much floor exists, not how fast the etchers run.

For programme sizing, the useful question is not which figure is right. It is what the plant shipped last quarter, in square metres, split by panel type — and whether that number came off the ERP or off the sales deck.

Line and space, split by a factor of two

The profile claims 3 mil by 3 mil, about 0.076 mm. The 2026 government article says 0.15 mm and describes a move to exposure-based imaging at that geometry. That is nearly 2:1, and nothing on either page is dated in a way that reconciles them.

Two readings are possible. The government figure may be the process floor for the appliance volume lines, with 3 mil a best-case quotation for a small panel on a good day. Or the profile may be quoting a capability the plant holds on one line and does not run routinely. Either reading ends the same way: 3 mil is not a production promise until somebody names the line, the panel size and the copper weight it applies to.

Worth knowing what the equipment list supports. The association recorded Han’s CNC drilling and routing, a CCD screen printer, an exposure unit, AOI and automatic electrical test, inside 50-plus PCB machines, with more than RMB 10 million spent on upgrades. That is a competent single and double-sided shop. It is not a description of a fine-line HDI line, and no HDI line is described anywhere.

Appliances reached through somebody else’s brand

The government article says Qingbao supplies Haier, Midea, BYD and Joyoung indirectly. Indirect is the operative word. It means the board goes into a module or a sub-assembly that a tier-one supplier sells onward, so the factory is qualified against that supplier’s acceptance criteria rather than the brand’s.

This has a practical consequence for a buyer. The factory’s process discipline has been shaped by appliance volumes, cost-down cycles and the tolerances a washing-machine controller needs. That is a real discipline. It is not the same discipline as automotive PPAP, and the page carries an automotive tag only because the same government article mentions the appliance and automotive-adjacent customer base.

Headcount: 200, 70, or 35

Three counts circulate. The profile says 130 to 200. The association visit report says 70-plus staff and 5,000-plus m² of production and office area. A 2025 annual filing, as republished by a business database, shows 35 employees on social insurance. That last page blocks non-China IPs, so it could not be opened directly and is reported here as a third-party figure.

The first two can coexist: a 16,000 m² building envelope with 5,000 m² actually fitted out for production and offices is an ordinary way for a Chinese plant to describe itself, and 70 people running two shifts can staff a shop of that size. The 35 figure is harder to square with 50-plus machines unless most of the work is automated or the filing covers one of several affiliated payrolls.

The honest conclusion is that headcount is not a reliable proxy here. Machine count, AOI, electrical test and the customer list are.

The profile and the product page describe different factories

The profile is about appliances: single-sided, double-sided and flexible boards. The product page is about carriers — 4-layer and 8-layer PLCC carrier boards, half-hole IC carrier boards, thick-copper aluminium boards. Not one of those entries carries a dimension, a tolerance, a layer stack or a finish.

Carrier boards sit next to IC substrate work. They are a different business from appliance control boards: different drilling, different registration, different inspection. A shop can do both, but not by accident, and not without saying how. Since the page gives no numbers at all, treat those lines as a catalogue of what sales has been asked for, not as capability.

Certificates: one file number, one typo

The UL file E321750 is printed in the profile, which is more than most small Ningbo shops publish. The number was not run against UL Product iQ, so which laminate or product category it covers is still open.

ISO 9001 appears with certificate number UQ080304R0 — and as “IS9001”, with no certification body named and no revision or expiry date. That combination usually means the certificate was scanned once and typed by hand. Ask for the PDF and check the scope line against the products you are buying.

Questions worth putting in the first email

Fit first. Qingbao suits appliance control boards, LED strips, flex and aluminium work at volume, where the buyer cares about price and repeatability rather than fine geometry. It does not suit a programme that needs a layer ceiling on paper, impedance control across six layers, or a UL file whose scope is printed rather than implied.

Then the specifics. Which plant address will build the order — the Chongshou site on Weiyi Road, or a subcontractor? What is the actual shipped area for the last two quarters? Does the 3 mil claim apply to 1 oz or to 0.5 oz copper? Which layers can the AOI and the electrical tester handle? And what does the UL file cover — the bare board, or an assembly?

What this record cannot answer

No unified social credit code, no registered capital, no maximum layer count, no maximum panel size and no copper-weight range is published anywhere. HDI appears in the association’s product list and in this page’s tags, but no HDI line, laser drill or sequential-lamination step is described. Whether the 8-layer carrier work is built in-house is not established. The 35-employee filing figure stands unexplained against 50-plus machines.

Published limits

Every value below is quoted as published by the company or a public record.

ParameterValue as published
Annual PCB output (Ningbo municipal government, Sept 2026) 360,000 m²/yr or more
Monthly output (Cixi SME association plant visit) 40,000 m²/month or more
Minimum line width and spacing (government article) 0.15 mm, on exposure-based imaging
Minimum line width and spacing (company profile) 3 mil x 3 mil, roughly 0.076 mm
Fastest quoted delivery (general manager, government article) 1.5 hours fastest, 1 week slowest
Plant building area (company profile) 16,000 m² on a 7,500 m² site
Employees (company profile) 130 to 200
PCB-specific equipment in place (association report) 50-plus machines, including AOI and automatic electrical test
R&D staff (company profile) 25 people

Certifications on record

A certificate covers a legal entity and a site, not a brand. Scope and expiry are recorded where published.

StandardWhat the record shows
UL (file E321750) File number printed in the profile. UL Product iQ was not queried, so product scope and validity are unknown; other pages use the abbreviation only.
ISO 9001 (cert. UQ080304R0) Number given, but the site spells the standard 'IS9001', names no certification body, and states neither revision nor expiry.

Ask this factory for a quote

Send one technical package and compare the replies. The RFQ checklist lists what to include; the quote specifications say which parameters change the price for the process you are buying.

Request a quote

Source and review conventions are described in how we verify. Corrections can be sent through the contact channel.