Factory profile · Public sources reviewed

Shengyi Electronics

生益电子股份有限公司 · Dongguan, Guangdong · Founded 1985 · SSE STAR Market 688183, listed 2021

Shengyi publishes certificate expiry dates per plant, which most Chinese factories do not. Its capability table merges five product families.

Shengyi is one of the few Chinese factories where an aerospace or medical programme can be screened from published certificates instead of promises: AS9100, Nadcap and ISO 13485 all carry dates and a named site. It suits backplanes, server boards and high-layer HDI, and it is a poor fit for a cheap 4-layer order.

Identity and record

Only entries that were checked against a source are shown. A blank field means we have not confirmed it, not that it does not exist.
Registered name (Chinese) 生益电子股份有限公司
Registered name (English) Shengyi Electronics Co., Ltd.
Founded 1985
Listed SSE STAR Market 688183, listed 2021
Headquarters Dongguan, Guangdong
Production sites Dongguan · Ji'an (Jiangxi) · Chachoengsao (Thailand, under construction)
Official website https://www.sye.com.cn
Evidence levelPublic sources reviewed
Last reviewed2026-11-11
Registered entity and published production sites Registered entity Shengyi Electronics and 3 named production sites, from the disclosures cited on this page. PUBLISHED RECORD Shengyi Electronics 生益电子股份有限公司 Founded 1985 · SSE STAR Market 688183, listed 2021 Dongguan Site 1 Ji'an Jiangxi Chachoengsao Thailand, under … Source: disclosures cited on this page
Entity and footprint map. Shengyi Electronics and the production sites named in the disclosures cited above.

Certificates with dates, and a site attached

Most factory websites in this segment show a row of logos. Shengyi publishes validity end dates, and it publishes them per plant: AS9100 to February 2029, Nadcap to August 2027, ISO 13485 to February 2028, IATF 16949 and ISO 9001 to December 2026, and a separate set for the Ji’an subsidiary valid to January 2027.

That is a materially different kind of evidence. Nadcap in particular is a special-process accreditation, not a quality-system certificate, and it is the one an aerospace customer actually needs for plating and chemical processing. AS9100 without Nadcap covers the management system but not the process. Here both appear with dates.

The IATF date is the one to watch: December 2026 is close enough that an audit trail should include the renewed certificate, not the one currently displayed.

Five families in one table

The capability table is the most complete in this batch and also the easiest to misread. It is broken into line card, backplane, server board, HDI and rigid-flex, and every headline number belongs to one family. Layer count runs from 2–50 on a line card, 2–56 on a backplane, 20–50 on a server board, 4–48 on HDI and 4–30 on rigid-flex.

The same applies to everything else. A 10 mm board is a backplane. A 0.3 mm board is a line card. 40:1 aspect ratio is a backplane number, and 25:1 is what an HDI board gets. 1.6/1.6 mil inner-layer traces are HDI-only. None of these are interchangeable, and a buyer who quotes the best of each column into one enquiry will get a correction, which is a slow way to learn the table.

The laminate parent is the reason this company exists

Shengyi Electronics was carved out of 广东生益科技股份有限公司, a laminate manufacturer listed on the Shanghai exchange under 600183 and still the controlling shareholder at 57.88%. The company states it has no actual controller.

The relationship explains the product mix: a factory that grew up next to a copper-clad laminate maker builds high-layer-count boards and backplanes, where material selection and material consistency dominate the technical conversation. It also means the group has a structural interest in laminate, which can be an advantage on material availability and a negotiating point if you want a non-Shengyi laminate.

Capacity, utilisation and what is coming

Design capacity reached 2.46 million m² per year by the end of June 2026, with 1.15 million m² per year under construction, and utilisation ran at 92.97% in 2025. Two projects are worth knowing about because they describe where the company is heading: a Dongguan AI-computing HDI project for 167,200 m² per year of fifth-order-and-above HDI including mSAP, started in May 2026 with trial production planned for 2028, and a Ji’an intelligent high-layer project of 700,000 m² per year with a product mix averaging 16 layers, first-stage trial production in June 2026.

For a buyer, the Ji’an project is the relevant one in the near term, because a plant averaging 16 layers is being tuned for mid-layer-count volume, not for the 40-layer backplanes that Dongguan does. If your board is a 12- to 20-layer control board, that is where the price will come from.

What to send

Send the stack-up with the target impedance and its tolerance, the aspect ratio, the panel size, and the layer count on the first line. For a backplane, add the connector press-fit requirements and the hole-to-copper clearance, because those usually drive the process more than the layer count does.

For an aerospace order, send the Nadcap scope you need and ask for the certificate reference. For a medical order, ask whether ISO 13485 covers the bare board or only assembly, because the certificate is site-level and scope-level, not product-level.

What is not established

No UL file number is published. Certificate numbers and accreditation bodies are omitted from the English page even though the dates are shown. Per-plant capacity is not disclosed; the 2.46 million m² figure is a group design capacity, and part of the 2026 number comes from investor briefing guidance rather than audited output. The Thailand plant in Chachoengsao is under construction and should not be treated as a live source.

Published limits

Every value below is quoted as published by the company or a public record.

ParameterValue as published
Layer count by family Line card 2–50, backplane 2–56, server board 20–50, HDI 4–48, rigid-flex 4–30
Board thickness by family Line card 0.3–8.0 mm, backplane 1.0–10 mm, HDI 0.4–7.0 mm
Maximum finished board size 600 × 1180 mm line card and backplane, 596 × 520 mm HDI, 785 × 475 mm server
Minimum trace width and spacing Inner 2/2 mil and outer 2.5/2.5 mil on line card; HDI inner 1.6/1.6 mil
Minimum drill Mechanical 0.15 mm; laser 0.075 mm, or 0.064 mm on HDI
Maximum PTH aspect ratio 40:1 on line card, backplane and server; 25:1 on HDI and rigid-flex
HDI build-up 8+N+8 with stacked or staggered vias; any-layer for HDI boards
Surface finishes Lead-free HASL, ENIG, immersion tin, immersion silver, gold finger, OSP+ENIG, ENEPIG
Design capacity, group 2.46 million m² per year at end-June 2026; 1.15 million m² per year under construction
Capacity utilisation, 2025 92.97%
Built capacity and capacity under construction Bar chart of 2 published figures in m2 per year, group design capacity. Design capacity reached 2.46 million m2/yr by June 2026; 1.15 million m2/yr is still under construction. The 92.97% utilisation rate, project figures and five product-family ceilings are excluded. In service 2.46m m2 design capacity at end-June 2026 Under build 1.15m m2 not yet available to order
Built capacity and capacity under construction. m2 per year, group design capacity. Design capacity reached 2.46 million m2/yr by June 2026; 1.15 million m2/yr is still under construction. The 92.97% utilisation rate, project figures and five product-family ceilings are excluded. Source: Broker report on group design capacity.

Certifications on record

A certificate covers a legal entity and a site, not a brand. Scope and expiry are recorded where published.

StandardWhat the record shows
AS 9100 (Dongguan) Valid until 2029-02-08
Nadcap (Dongguan) Valid until 2027-08-31
ISO 13485 (Dongguan) Valid until 2028-02-26
IATF 16949 (Dongguan) Valid until 2026-12-04, a renewal date close enough to check before a programme starts
ISO 9001 (Dongguan) Valid until 2026-12-04
ISO 9001 and IATF 16949 (Ji'an) Separate certificate set for the Jiangxi plant, both valid until 2027-01-29

Ask this factory for a quote

Send one technical package and compare the replies. The RFQ checklist lists what to include; the quote specifications say which parameters change the price for the process you are buying.

Request a quote

Source and review conventions are described in how we verify. Corrections can be sent through the contact channel.