Factory profile · Public sources reviewed

Kinwong

深圳市景旺电子股份有限公司 · Shenzhen, Guangdong · Founded 1993 · SSE 603228

The 80-layer figure belongs to Kinwong high-layer-count line, not every plant. Seven bases, four product families, and one certificate you can verify.

Kinwong suits a programme that needs rigid, flex and rigid-flex from one group. It does not suit a buyer who wants one plant nails-down capability: the published numbers are per product line, and no page states which of the seven bases will run the job.

Identity and record

Only entries that were checked against a source are shown. A blank field means we have not confirmed it, not that it does not exist.
Registered name (Chinese) 深圳市景旺电子股份有限公司
Registered name (English) Kinwong Electronic Co., Ltd.
Founded 1993
Listed SSE 603228
Headquarters Shenzhen, Guangdong
Production sites Shenzhen · Longchuan (Heyuan) · Jishui (Ji'an, Jiangxi) · Xinfeng (Ganzhou, Jiangxi) · Zhuhai Jinwan · Zhuhai Fushan · Thailand (under construction)
Official website https://www.kinwong.com
Evidence levelPublic sources reviewed
Last reviewed2026-11-11
Registered entity and published production sites Registered entity Kinwong and 4 named production sites, from the disclosures cited on this page. PUBLISHED RECORD Kinwong 深圳市景旺电子股份有限公司 Founded 1993 · SSE 603228 Shenzhen Site 1 Longchuan Heyuan Jishui Ji'an, Jiangxi Xinfeng Ganzhou, Jiangxi +3 more sites named in the profile Source: disclosures cited on this page
Entity and footprint map. Kinwong and the production sites named in the disclosures cited above.

One supplier, four product families, seven sites

The useful thing about Kinwong for a buyer is coverage. Rigid boards, flex, rigid-flex, metal-base and substrate-like PCBs are all made inside the same group, which removes the coordination problem of running three suppliers for one assembly. The 2025 annual report summary lists seven production bases: Shenzhen, Longchuan in Heyuan, Jishui and Xinfeng in Jiangxi, two separate Zhuhai sites, and a Thailand base still under construction.

The unhelpful thing is that the website presents capability by product family and almost never by plant. Four separate product pages, four separate sets of numbers, no mapping between them. A buyer who reads “80 layers, 40:1 aspect ratio” will assume it applies to the supplier, when the page it comes from is the high-layer-count line.

The numbers that get read wrong

80 layers and 40:1 sit on the HLC page. Conventional PCB tops out at 12 oz copper, 5.0 mm thickness and a 699 × 594 mm panel. HDI is quoted at 30/30 μm by mSAP and 40/40 μm by tenting. The Zhuhai SLP line goes to 18 layers anylayer.

The SLP page contains a wording trap worth flagging: the row reads “max laser hole diameter 50 μm”. Every other factory publishes a minimum, because a minimum is the achievement. A maximum here probably means the largest laser-drilled hole the line handles, not that the line cannot drill below 50 μm, but the page does not say which, and it should not be read as a capability limit in either direction without confirmation. Ask for the process specification rather than quoting from the table.

One certificate you can actually verify

The management-system page is a wall of logos with no certificate numbers and no issuing bodies, which tells you the group holds these systems but not which entity or site. There is an exception. DQS publishes a customer-database entry for 江西景旺精密电路有限公司 at the Jishui plant, covering ISO 9001:2015 and IATF 16949:2016 for PCB manufacture, dated 22 May 2024. That is a certificate number a quality manager can check in an afternoon.

For an automotive programme, this difference matters. A group-level IATF logo does not tell the auditor which site was audited; a certification-body database entry does. Ask each candidate site for the certificate reference and the audit scope, and expect the answer to name a legal person, not a brand.

Where the money went

The group reported 2025 revenue of CNY 15.03 billion and describes itself as the tenth-largest PCB maker worldwide. Growth in the period went into the Zhuhai sites, which are positioned for anylayer, IC substrates and substrate-like PCBs aimed at AI servers, optical modules and high-performance computing, plus the Thailand base. If your product is a server board or an optical module carrier, you are being quoted against the same capacity that the company is prioritising, which usually helps on price and hurts on small-volume flexibility.

What to put in the enquiry

Name the plant you want, not just the supplier, and state whether you will accept a transfer after qualification. Ask for the certificate reference of the site that will run the job, not the group logo. If your design touches the HLC limits, say whether the 80 layers is a prototype or a production quantity, because the two are built on different lines with different yield economics. For flex and rigid-flex work, treat the capability as a separate supplier relationship: different plant, different process engineering, different quality history.

What is not published

No UL file number appears anywhere on the site, so the UL listing has to be matched to a legal entity in UL Product iQ. There is no per-plant capability split, no per-plant capacity in square metres, and no employee count at site level. The plant count itself moved from eleven factories in 2023 to thirteen in 2024, so any list is a snapshot rather than a fixed fact.

Published limits

Every value below is quoted as published by the company or a public record.

ParameterValue as published
Max layer count, high-layer-count line 80 layers
Max aspect ratio, high-layer-count line 40:1
Line width and spacing, HLC 40/40 μm
Impedance tolerance, HLC ±7%
Max copper weight, conventional PCB 12 oz
Max board thickness, conventional PCB 5.0 mm
Max delivered panel, conventional PCB 699 × 594 mm
Min line width and spacing, HDI 30/30 μm mSAP, 40/40 μm tenting
Max layer count, anylayer SLP (Zhuhai) 18 layers
Laser hole diameter, Zhuhai SLP line (page says max) 50 μm
Rigid-flex construction 2–16 layers rigid, 1–6 layers flex
Two HDI line widths, two processes Bar chart of 2 published figures in µm minimum line and space, HDI boards. The HDI page quotes 30/30 µm by mSAP and 40/40 µm by tenting; the finer number belongs to one process. The 50 µm 'max laser hole' row is a wording trap and is excluded, as are conventional-board limits. mSAP 30 µm 30/30 µm by mSAP Tenting 40 µm 40/40 µm by tenting
Two HDI line widths, two processes. µm minimum line and space, HDI boards. The HDI page quotes 30/30 µm by mSAP and 40/40 µm by tenting; the finer number belongs to one process. The 50 µm 'max laser hole' row is a wording trap and is excluded, as are conventional-board limits. Source: HDI capability row quoted on this page.

Certifications on record

A certificate covers a legal entity and a site, not a brand. Scope and expiry are recorded where published.

StandardWhat the record shows
IATF 16949:2016 Listed on the management-system page; no certificate number or issuing body shown
ISO 9001:2015 Group level, logo only
ISO 13485:2016 Listed twice, once at group and once at site level; neither entry carries a number
IECQ QC080000:2017 Listed on the management-system page
ISO 17025 Laboratory accreditation, listed on the same page
IATF 16949 at Jiangxi Kinwong (Jishui) Separate DQS database entry for 江西景旺精密电路有限公司, certificate dated 22.05.2024, covering PCB manufacture

Ask this factory for a quote

Send one technical package and compare the replies. The RFQ checklist lists what to include; the quote specifications say which parameters change the price for the process you are buying.

Request a quote

Source and review conventions are described in how we verify. Corrections can be sent through the contact channel.