Shanxu Precision Circuit (Shenzhen)
深圳市山旭精密电路有限公司 · Shenzhen, Guangdong · Founded 2021 · Not listed; private
Shanxu says it began in 2003, but its Shenzhen entity dates to 2021 and a Jiangxi one to 2020. The capability table says 1-40 layers; the profile says 1-60.
Shanxu publishes a detailed rigid-board capability table and a separate Jiangxi plant, but the brand's 2003 story, a 2021 Shenzhen entity and a 2020 Jiangxi entity do not line up, and the layer ceiling is published as both 40 and 60. Good for multilayer and rigid-flex work; ask which entity quotes and which site holds the certificates.
Identity and record
| Registered name (Chinese) | 深圳市山旭精密电路有限公司 |
|---|---|
| Founded | 2021 |
| Listed | Not listed; private |
| Headquarters | Shenzhen, Guangdong |
| Production sites | Shenzhen (Shajing, Bao'an) · Ji'an (Jishui, Jiangxi) |
| Unified social credit code | 91440300MA5GL6J37Y |
| Official website | http://www.szsxpcba.com/ |
| Evidence level | Public sources reviewed |
| Last reviewed | 2026-11-19 |
The three founding dates are three different claims
The company profile says the business began in early 2003. The registry shows a Shenzhen legal entity established on 22 January 2021 with RMB 2 million of capital, and a separate Jiangxi entity in Jishui established on 4 August 2020 with RMB 60 million of capital. All three dates are attached to the name Shanxu, and none of them cancels the others.
They answer different questions. The 2003 figure is a brand history; the 2021 and 2020 figures are the registration dates of two legal persons. A buyer who asks when the factory was founded will get a different answer depending on which page is read. The filing also records the Shenzhen legal representative as Tang Xiaobin and the unified social credit code 91440300MA5GL6J37Y, while the Jishui entity carries 91360822MA399PW79G. Those codes, not the founding story, are what identify the company that would sign a quotation.
Nothing here says the 2003 claim is false. A group can trade under a name for years before the current entity is registered, and this site publishes both dates rather than choosing one. The point for a buyer is that the number on a supplier scorecard needs an entity attached to it. Ask which of the two companies issues the invoice.
Two Shajing addresses, and a second domain
The profile places the factory on the second floor of Building D in the Zhongxi Industrial Park, Tongfuyu Industrial Zone, Shajing. The registry result for the Shenzhen entity lists its address in a different part of Shajing, and the company site also publishes a second domain, cnghpcb.com, beside szsxpcba.com. Two addresses inside one district and two domains for one brand are not errors on their own, but they make the identity line worth checking.
The Jiangxi plant is not a fourth possibility: the profile names a new plant in Jishui, which lines up with the 2020 registry entry. So the group has at least two production locations, and the question is which one holds the certifications that will be quoted. For a rigid-flex or heavy-copper order, confirm the producing site before accepting a certificate that names the other one.
The layer ceiling is published twice, at two values
The rigid-board capability table gives 1 to 40 layers. The company profile, on a different page of the same site, gives 1 to 60 layers. Both are first-party statements, and neither carries a date or a product qualifier that would reconcile them.
The capability table is the more precise document. It attaches the layer range to a 0.2 to 6 mm board thickness, 210 micrometres of base copper on inner and outer layers, a 0.2 mm minimum mechanical drill, a 12 to 1 aspect ratio and 0.076 mm minimum line and space. The 60-layer figure appears only in the profile’s product list, with no matching process window. A buyer should treat 40 layers as the number that can be checked against a capability table and ask what the 60-layer claim refers to — a group figure, a special process, or a ceiling at the Jiangxi plant.
What the capability table actually specifies
The table names the laminate families it works with, including FR-4 high-Tg and halogen-free, polyimide, PTFE, aluminium and copper base, and lists suppliers such as Rogers, Arlon, Isola, ITEQ and Shengyi. It sets impedance control at plus or minus 10 percent for single-ended, differential and coplanar structures, and gives a largest multilayer panel of 508 by 610 millimetres. Selective gold plating is stated up to 3 micrometres. These are usable numbers because each is tied to a named parameter.
It says less about output. No monthly capacity, no achieved yield, no stack-up example for a 40-layer board and no statement of which site holds the line that reaches these limits. The profile claims 1,800 staff with 10 percent in research and 12 percent in quality control, but does not split that figure between Shenzhen and Jishui. The group number is easy to find; the number for the entity that will quote is not.
The certificates are named but not numbered
The quality page says ISO 9001, ISO 14001 and IATF 16949 are audited by BSI, that all products are UL approved and built to IPC-A-600H, and that the line runs in-process quality control, statistical process control and full electrical test. For automotive and medical work these are the relevant systems, and naming the accreditation body is more useful than a bare logo.
What is missing is the paperwork that makes a certificate checkable: numbers, holders, site scopes and expiry dates. A statement that products are UL approved cannot be looked up without a file number. An IATF 16949 certificate cannot be matched to a purchase without knowing which legal entity and which address it names. Ask for the certificate PDFs, then read the holder and scope lines against the two companies and two sites on this page.
What to verify first
- Which of the two legal entities issues the quotation, the invoice and the certificate of conformance.
- Whether the 2003 brand history is supported by a group structure showing how the 2021 and 2020 entities relate.
- Which Shajing address runs the line, and whether the second domain is the same operation.
- Certificate PDFs with holder, number, standard version and site scope, especially for IATF 16949 and UL.
- Whether the 40-layer or the 60-layer figure is the one a quote will be based on.
What is not established
- No monthly capacity figure is published for either entity.
- No UL file number, IATF certificate number or expiry date was located.
- The 1,800 staff figure is not split between the Shenzhen and Jiangxi sites.
- The relationship between the two legal entities is not stated in the sources reviewed.
- Achieved yield, stack-up examples and heavy-copper thickness limits are not published here.
Published limits
Every value below is quoted as published by the company or a public record.
| Parameter | Value as published |
|---|---|
| Rigid layer count on the capability table | 1-40 layers; the company profile separately says 1-60 layers |
| Board thickness and base copper | 0.2-6 mm board; 210 micrometres (6 oz) max base copper, inner and outer |
| Minimum drill and aspect ratio | 0.2 mm minimum mechanical drill; 12:1 aspect ratio |
| Minimum line and space | 0.076 mm / 0.076 mm (0.003 in / 0.003 in) |
| Impedance tolerance | Single-ended, differential and coplanar impedance control +/-10% |
| Largest panel and plating | 508 x 610 mm (20 x 24 in) for multilayer; selective gold up to 3 micrometres |
| Rigid board product range | Rigid, flexible, rigid-flex, aluminium and copper base, ceramic, HDI, heavy copper, high-frequency |
| Staff and site claimed on the profile | 1,800 staff; 10% R&D, 12% quality control; profile dates the business to early 2003 |
| Shenzhen entity registration | Established 2021-01-22; RMB 2m capital; USCC 91440300MA5GL6J37Y; legal representative Tang Xiaobin |
| Jiangxi entity registration | Shanxu Precision Circuit (Jishui) established 2020-08-04; RMB 60m capital; USCC 91360822MA399PW79G |
| Quality system claimed | BSI-audited ISO 9001, ISO 14001 and IATF 16949; products stated UL approved; IPC-A-600H |
| Alternative company domain | The site lists a second domain, cnghpcb.com, alongside szsxpcba.com |
Certifications on record
A certificate covers a legal entity and a site, not a brand. Scope and expiry are recorded where published.
| Standard | What the record shows |
|---|---|
| ISO 9001, ISO 14001, IATF 16949 | The certificates page says these systems are BSI-audited. No certificate numbers, holders, site scopes or expiry dates are published. |
| UL (claimed) | The certificates page says all products are UL approved and built to IPC-A-600H. No UL file number is given. |
Ask this factory for a quote
Send one technical package and compare the replies. The RFQ checklist lists what to include; the quote specifications say which parameters change the price for the process you are buying.
Source and review conventions are described in how we verify. Corrections can be sent through the contact channel.