Factory profile · Public sources reviewed

Jinhong Electronics (Ji'an)

江西锦宏电子有限公司 · Founded 2020 · Not listed (private)

Jinhong's own pages give three plant areas, three headcounts and four layer counts, and call the site both a quick-turn shop and a volume factory.

Use it for 1-12 layer FR-4 and quick-turn prototypes where the buyer fixes the process parameters in writing first. Do not send a 16-layer RFQ on the strength of one channel page: the same site publishes four layer ceilings, three plant areas, three headcounts and two contradictory process tables.

Identity and record

Only entries that were checked against a source are shown. A blank field means we have not confirmed it, not that it does not exist.
Registered name (Chinese) 江西锦宏电子有限公司
Founded 2020
Listed Not listed (private)
Production sites Ji'an · Shenzhen
Official website http://www.jinhongpcb.com
Evidence levelPublic sources reviewed
Last reviewed2026-11-11
Registered entity and published production sites Registered entity Jinhong Electronics (Ji'an) and 2 named production sites, from the disclosures cited on this page. PUBLISHED RECORD Jinhong Electronics (Ji'an) 江西锦宏电子有限公司 Founded 2020 · Not listed (private) Ji'an Site 1 Shenzhen Site 2 Source: disclosures cited on this page
Entity and footprint map. Jinhong Electronics (Ji'an) and the production sites named in the disclosures cited above.

Four ceilings for one product

Four different maximum layer counts are printed across this supplier’s own web pages, and no page says which one a quotation should use. The homepage caps the range at 12 layers. The process-capability page states 1 to 12 layers on FR-4 laminates from Shengyi and Kingboard. The Ji’an channel page offers 1 to 16 layers. A third-party shop listing quotes 4 to 20. These are not four products with four stacks; they are four answers to one question about the same site.

The spread matters because a layer count is the first thing a board house filters on. An RFQ for a 14-layer panel will be answered yes by one Jinhong page and no by another. Before any technical discussion, get one written confirmation of the layer ceiling, the laminate and the panel size that the Suichuan line will actually run.

Three plants, three crews, three capacities

The same pattern repeats for every scale figure. Plant area is 50,000 m2 in the company profile, 26,000 m2 on the Ji’an channel and 3,000 m2 in a third-party shop. Headcount is 700-plus in the profile body, 500-plus in a counter on that same page, and 400-plus on the channel. Monthly capacity is 150,000 m2 in the profile and a 2025 bank visit article, 1.1 million m2 a year, about 92,000 m2 a month, on the channel, and 40,000 m2 a month in the shop listing.

None of these carries a date, and none says which of the two addresses it describes. This is not a group-versus-plant split of the kind the other Ji’an profiles show; it is one website publishing three internally inconsistent versions of itself. For a capacity question, the only defensible move is to ask for one month of shipped square metres from one named line.

One process table, two contradictory versions

The process-capability page is the most detailed document here and it is internally at odds with the homepage. It gives board thickness 0.4 to 3.2 mm across ten standard steps, a maximum size of 580 by 550 mm, a 400 by 500 mm working panel and a usual customer design limit of 560 by 530 mm. Outer copper is 1 to 6 oz (35 to 210 um) with a 1 oz default and 0.5 oz inner, minimum line and space 0.075 mm (3 mil), mechanical drilling 0.15 to 6.3 mm, a 0.45 mm minimum metal slot, and multilayer vias of 0.25 mm inner and 0.5 mm outer against 0.3 and 0.6 mm on double-sided boards.

The homepage contradicts it: a 3.0 mm maximum thickness, 3 oz maximum copper, a 520 by 650 mm working panel, a 0.1 mm minimum hole and a 0.20 mm minimum pad. Both are first-party. A buyer specifying a 0.15 mm drill or 6 oz outer copper will get a different answer depending on which page the salesperson opens. Attach the drawing to a single signed capability sheet and require the reply to quote that sheet’s numbers.

A prototype shop or a volume plant

The site markets quick-turn samples with firm lead times: double-sided in 24 hours, four-layer in 48, six- to eight-layer in 72, with no minimum order quantity. That is a concrete delivery promise and one of the few numbers on this site a buyer can actually hold the supplier to. The company profile, however, describes building a large-volume manufacturing factory. Both positions sit under the same brand.

These are different businesses. A quick-turn desk lives on many small part numbers and fast changeovers; a volume plant lives on long runs and loading. The 2025 note that two new lines lifted HDI and high-speed capacity by over 10 percent, with automation above 98 percent, points toward volume, while the profile’s own 2020 figure was automation above 90 percent. Ask which line would run a production order and what its lead time is, because the 24, 48 and 72 hour promise is a sample service, not a volume schedule.

The 2025 expansion and the certificates

A June 2025 article from a Shangrao Bank Suichuan branch visit repeats the 150,000 m2 a month and near RMB 600 million annual output value, and adds the two new lines. The company profile says it passed ISO 9001, TS 16949, CQC, UL and RoHS in 2020, and later on the same page writes IATF 16949 as well, so both the old and new automotive-standard names stand. UL, CQC and RoHS/REACH are listed without any file number, certificate number or test-report number.

HDI and high-speed boards are a 2025 addition, but the site publishes no HDI layer count, build-up stage count or high-frequency material parameters. Treat HDI here as a declared new line, not a specified capability. The profile also organises products into automotive, medical, telecom, security and power categories, which is a market list rather than a process limit.

Suichuan and a Shenzhen address

The Ji’an legal person was registered on 15 May 2020 with RMB 20 million of capital, RMB 4.12 million paid in, at a plant in the Xintonglian technology park, east zone of the Suichuan industrial park. The site footer also lists a Shenzhen Bao’an Shajing factory. The record gives no size, no line list and no ownership status for that Shenzhen site, so this profile does not describe it as a second plant of known capacity.

For lead time, the only published figures are the sample hours above. There is no freight, port, transit, volume lead-time or workforce-stability data anywhere in the sources, so an inland address supports none of those conclusions. What it does support is a simple instruction: name the Suichuan entity on the order and confirm whether the Shenzhen address is a factory, an office or only a footer line.

Where an RFQ has to start

Shortlist this supplier for 1 to 12 layer FR-4 prototypes and quick-turn samples, where 24 to 72 hour turnaround and no minimum order are useful and where the buyer is willing to fix the process table in writing first. The detailed capability page, if confirmed, is a workable specification for rigid boards.

Do not shortlist it for 16- or 20-layer work, for HDI with a stated stage count, or for a volume programme whose schedule rests on a homepage number. Four layer ceilings, three plant areas and two contradictory process tables mean the first RFQ has to be a data-confirmation exercise before it is a price request.

Not settled by the public record

No unified social credit code, no certificate numbers, no authoritative plant area, no authoritative monthly capacity, no settled headcount and no published HDI layer count. The 50,000/26,000/3,000 m2 areas, the 700/500/400 headcounts, the three capacities and the four layer ceilings are printed side by side rather than reconciled. The 90 percent and 98 percent automation figures belong to different pages and dates, and the TS 16949 and IATF 16949 spellings both remain. The Shenzhen address is recorded only as a footer entry.

Published limits

Every value below is quoted as published by the company or a public record.

ParameterValue as published
Plant, staff and output 50,000 m2 plant, 700-plus staff, 150,000 m2 a month, annual output value near RMB 600M
Layer count Process table states 1-12 layers; FR-4 laminates Shengyi S1000H/S1141/S1000-2M and Kingboard KB6160
Board thickness Board thickness 0.4-3.2 mm; standard 0.4/0.6/0.8/1.0/1.2/1.6/2.0/2.4/3.0/3.2 mm
Panel size Max 580x550 mm; working panel 400x500 mm; customer design usually within 560x530 mm
Copper weight Outer copper 1-6 oz (35-210 um), 1 oz default; inner 0.5 oz (17 um)
Fine line and drilling Min line/space 0.075 mm (3 mil); mechanical drill 0.15-6.3 mm; min metal slot 0.45 mm
Minimum via Multilayer via 0.25 mm inner / 0.5 mm outer; double-sided 0.3 mm / 0.6 mm
Quick-turn lead time Samples: double-sided 24 h, 4-layer 48 h, 6-8 layer 72 h; no minimum order quantity
2025 line expansion 2025: two new lines, HDI and high-speed capacity up over 10%, automation above 98%
Conflicting plant figures Another channel page: 26,000 m2, 400-plus staff, 1.1 million m2 a year, 1-16 layers
Sample lead times by layer count Bar chart of 3 published figures in hours, quick-turn samples on the process table. The published sample service quotes 24 h for double-sided, 48 h for four-layer and 72 h for six-to-eight-layer boards. This is a sample service, not a volume production schedule. 2-sided 24 h double-sided samples 4-layer 48 h four-layer samples 6-8 layer 72 h six to eight layer samples
Sample lead times by layer count. hours, quick-turn samples on the process table. The published sample service quotes 24 h for double-sided, 48 h for four-layer and 72 h for six-to-eight-layer boards. This is a sample service, not a volume production schedule. Source: published process-capability and sample page.

Certifications on record

A certificate covers a legal entity and a site, not a brand. Scope and expiry are recorded where published.

StandardWhat the record shows
ISO 9001 Company profile says it was passed in 2020; no number, issuer or expiry published
IATF 16949 / TS 16949 The same page writes TS16949 first and IATF16949 later; both forms stand, with no number or scope
UL / CQC Product-safety marks listed on the profile; no UL file number or CQC certificate number published
RoHS / REACH Compliance listed on the profile and honours column; no test-report number given

Ask this factory for a quote

Send one technical package and compare the replies. The RFQ checklist lists what to include; the quote specifications say which parameters change the price for the process you are buying.

Request a quote

Source and review conventions are described in how we verify. Corrections can be sent through the contact channel.