Factory profile · Public sources reviewed

CEE Technology (Zhongjing)

惠州中京电子科技股份有限公司 · Huizhou, Guangdong · Founded 2000 · SZSE 002579, listed 2011

Zhongjing publishes 2026, 2027 and 2028 columns with sample and mass-production targets. Reading a number without its column quotes a board nobody builds.

CEE is one of the few factories that publishes a forward-looking capability roadmap with separate sample and mass-production columns, and that is useful if you read it correctly. Treat the 2027 and 2028 columns as targets, not capabilities, and the current numbers become a defensible basis for a shortlist.

Identity and record

Only entries that were checked against a source are shown. A blank field means we have not confirmed it, not that it does not exist.
Registered name (Chinese) 惠州中京电子科技股份有限公司
Registered name (English) Huizhou CEE Technology Inc.
Founded 2000
Listed SZSE 002579, listed 2011
Headquarters Huizhou, Guangdong
Production sites Huizhou (Zhongkai Hi-Tech Zone, Chenjiang) · Zhuhai (Xiangzhou, CEE Topsun) · Zhuhai (Fushan, CEE Zhuhai) · Thailand (Ayutthaya, Quan Tech)
Official website https://www.ceepcb.com
Evidence levelPublic sources reviewed
Last reviewed2026-11-11
Registered entity and published production sites Registered entity CEE Technology (Zhongjing) and 4 named production sites, from the disclosures cited on this page. PUBLISHED RECORD CEE Technology (Zhongjing) 惠州中京电子科技股份有限公司 Founded 2000 · SZSE 002579, listed 2011 Huizhou Zhongkai Hi-Tech… Zhuhai Xiangzhou, CEE T… Zhuhai Fushan, CEE Zhuh… Thailand Ayutthaya, Quan … Source: disclosures cited on this page
Entity and footprint map. CEE Technology (Zhongjing) and the production sites named in the disclosures cited above.

Three columns, one table

The HLC and HDI pages are not specification sheets. They are technology roadmaps with columns for 2026, 2027 and 2028, and each column splits into sample and mass production. A row might read 30 layers for a 2026 sample and 28 for 2026 mass production, then 32 and 30 for 2027.

That structure is more honest than a single headline number, and it is also easier to misquote. A directory that scrapes the table can pick the 2028 mass-production column and present a future capability as current. When you compare this factory against another, quote the 2026 mass-production column, because that is what a production order placed this year will get.

The table has units and rows in the wrong place

Two errors are worth knowing before you read the numbers. The HLC table labels minimum trace width and space in millimetres, while the values (50/50, 65/65) are clearly micrometres. Read literally, the table would claim 50 mm traces. The other is a row labelled maximum board thickness that contains panel dimensions, 670 × 580, with the real thickness on a separate “finish overall board thickness” row.

Neither error changes what the factory can do, and both are ordinary website editing mistakes. They do change what a careful buyer should do: take the numbers from the table, but confirm the meaning in writing before a stack-up is released.

Certificate identifiers exist, but only in filenames

The quality page shows the usual gallery of certificate images. The difference here is that the image filenames carry SGS document identifiers: CN2600000357 for IATF 16949 and CN2600000358 for ISO 9001. That is the only text-readable identifier on the page, and it is enough to start a verification with SGS.

For a programme that needs per-site evidence, the gallery is not sufficient. Ask which legal entity holds the IATF certificate and whether the Huizhou, Zhuhai and Thailand sites are covered by it or by separate certificates.

Four bases, one of which is only partly owned

The company describes four production bases: Huizhou, which is the listed entity itself; CEE Topsun in Zhuhai Xiangzhou, which does flex and was acquired in 2018; CEE Zhuhai in Fushan, in production since 2021; and Quan Tech in Thailand, operational in 2026.

Topsun is held at 53.06%, while the Fushan and semiconductor entities are wholly owned. That difference decides who signs a flex contract and whose capacity you are relying on. For a buyer, a partly owned subsidiary is not a problem, but it is a different counterparty with its own board and its own priorities.

Headcount depends on which site you read

The Chinese site says 5,000 employees and 300,000 m² of built plant area across the group. The English site of the same company says more than 6,000. Both are plausible at different dates; neither is dated.

This is a small thing that tells you something larger: the two language versions are maintained separately and diverge. When a specification matters, use the Chinese page and translate the number yourself, or ask for the document.

How to use this profile

Shortlist CEE for a 12- to 24-layer board or an 18-layer HDI where a domestic Chinese supplier with flex capability in the same group is useful. Send the stack-up, the impedance target and the annual quantity, and ask for the 2026 mass-production column in writing.

Ask two extra questions. Which entity will contract, given the partly owned Zhuhai flex subsidiary. And whether the IATF certificate covers the site that will build the order, since the gallery does not say.

What is not established

No UL file number is published and the certification page does not name the holder entity. Annual capacity in square metres, maximum panel size and the copper-weight range are not published; the copper row uses an ambiguous unit that reads as “H oz to 4 oz”. Customer concentration and per-plant capacity are also absent. The roadmap years are the only indication of when a capability is expected to be real.

Published limits

Every value below is quoted as published by the company or a public record.

ParameterValue as published
Max layer count, HLC, 2026 sample 30 layers
Max layer count, HLC, 2026 mass production 28 layers
Min trace width and space, HLC inner layer, 2026 sample 50/50 µm
Min mechanical via, HLC, 2026 sample 0.150 mm
Max aspect ratio, HLC 20:1
Finished board thickness, HLC, 2026 sample 0.3–4.0 mm
Max layer count, HDI, 2026 sample and mass production 18 layers
HDI stack-up 1+N+1 to 6+N+6, any layer
Min laser via, HDI, 2026 sample 0.065 mm
Min trace width and space, HDI, 2026 sample 35/35 µm by mSAP
Surface finishes, HLC OSP, ENIG, immersion tin, immersion silver, gold finger
Sample and mass production, 2026 column Bar chart of 2 published figures in layers, maximum HLC layer count in the 2026 column. Both figures are in the 2026 HLC column, with sample and mass production separate. The 2027 and 2028 columns are targets and are excluded, as are the HDI row and the mislabelled mm trace row. 2026 sample 30 layers 30-layer 2026 sample column 2026 mass 28 layers 28-layer 2026 mass-production column
Sample and mass production, 2026 column. layers, maximum HLC layer count in the 2026 column. Both figures are in the 2026 HLC column, with sample and mass production separate. The 2027 and 2028 columns are targets and are excluded, as are the HDI row and the mislabelled mm trace row. Source: HLC technology roadmap, 2026 column.

Certifications on record

A certificate covers a legal entity and a site, not a brand. Scope and expiry are recorded where published.

StandardWhat the record shows
IATF 16949:2016 SGS certificate, document ID CN2600000357 readable in the image filename; scope not stated
ISO 9001:2015 SGS certificate, document ID CN2600000358
ISO 13485:2016 Certificate image only
ISO 14001 / ISO 45001 Certificate images only
IECQ QC080000 Certificate image only
ISO/IEC 27001:2022 and ISO 50001 Certificate images only

Ask this factory for a quote

Send one technical package and compare the replies. The RFQ checklist lists what to include; the quote specifications say which parameters change the price for the process you are buying.

Request a quote

Source and review conventions are described in how we verify. Corrections can be sent through the contact channel.