City cluster

PCB manufacturers in Huizhou

Huizhou took the volume fabrication that could no longer be done economically in Shenzhen, and now hosts one of the ten largest new PCB clusters in China, with large single-site plants rather than a spread of small shops.

Cluster notes reviewed 2026-11-11. Factory records below carry their own evidence level and review date.

The overflow city

When Shenzhen’s land and environmental capacity stopped accommodating new plating lines, the plants did not go far. Huizhou is 60 to 90 minutes north-east of Shenzhen, connected by motorway, and it had what a board shop needs: industrial land, a permit framework for wet processes, and a labour pool that could be trained.

The result is a cluster built around a small number of very large sites rather than many small ones. Huiyang district alone reports PCB-chain output above CNY 30 billion for 2025 and is listed among the ten largest new PCB clusters in China, one of three in Guangdong. That structure has consequences for a buyer: fewer suppliers to choose from, higher minimum order quantities, and a much better chance that the plant you visit is the plant that ships.

Where the plants are

Area Character What it means
Huiyang, around Danshui The densest board concentration, anchored by Victory Giant High layer count and high-order HDI, AI server and automotive work
Boluo, around Huzhen Large Taiwanese-owned plants, including Compeq’s Huizhou site Long-running, process-mature, mid to high volume
Zhongkai Electronics assembly and display, less bare-board A destination for box build and systems, not for fabrication
Huicheng and the rest Smaller shops and supporting trades Cheaper, thinner process control

The distances matter. Danshui and Huzhen are 40 to 60 km apart, and a “Huizhou factory visit” that tries to cover both in one morning will spend more time in the car than on the floor.

What the cluster builds

The product mix followed the customer, not the other way round. The two anchor plants built their reputations on high layer count and high-density interconnect for servers, networking and handsets, and the supply chain that grew around them serves that: laminate in volume, fine-line imaging, laser drilling, and the plating capacity that high-aspect-ratio work needs.

Around that core, Huiyang reports a growing chain of dedicated chemical, laminate and processing suppliers, which is the sign of a cluster maturing rather than a set of isolated plants. For a buyer, the practical difference is that a 12-layer high-speed board is an ordinary order here, and a two-layer consumer board is an odd one.

The Shenzhen relationship, and why it confuses quotes

Many companies that present themselves as Shenzhen manufacturers have their production here. That is normal, and it is not misrepresentation as long as the production address is disclosed. It becomes a problem in three specific ways:

  • The entity on the invoice is not the entity with the permit. Ask for the unified social credit code of the manufacturer, then check the pollutant discharge permit against it.
  • The audit you planned is in the wrong city. A half-day site audit needs the production address, not the sales office.
  • Lead times assume Shenzhen logistics. Boards trucked from Huizhou to Yantian add a day, and a Friday cut-off in Huizhou is a Thursday cut-off if the freight has to clear Shenzhen traffic.

Where sourcing goes wrong

  • Quoting a flagship plant for a small order. The anchor factories here are set up for volume; a 30 m² order will be quoted high on purpose. The right supplier for a small order is a tier-two shop in the same district, not the plant on the brochure.
  • Confusing Huiyang with Huicheng. They are different industrial bases with different cost structures, an hour apart in traffic.
  • Assuming environmental compliance because the plant is new. New buildings do not imply permitted plating. Ask for the permit, then ask which park the wet line is in.
  • Reading group capacity as site capacity. Multi-site groups publish totals. Ask for the monthly capacity of the specific site that will run your order.

What we check before listing a factory in Huizhou

  • Production address at district level, matched to the pollutant discharge permit.
  • Whether the site is the group’s main plant or a satellite, and which lines serve which market.
  • Minimum order quantity and the smallest panel the line will schedule.
  • In-house versus subcontracted drilling, plating and surface finish.
  • Insured headcount against claimed capacity, using the annual report where the company files one.

Getting there

Shenzhen Bao’an airport is about 90 minutes by road; Huizhou has its own high-speed rail stations at Huizhou North and Huizhou South, with connections to Shenzhen in under an hour. Ports are handled through Shenzhen; Huizhou’s own port moves bulk and containers at a smaller scale.

Related: Guangdong as a cluster, Shenzhen for the engineering layer, Dongguan for the neighbouring chain, and multilayer boards for the layer counts this cluster is built around.

Huizhou: recorded factories

Ordered by evidence strength, then by most recent review. Each profile states what was checked, on what date, and which processes are subcontracted rather than performed on site. A listing is not a guarantee of factory ownership or certification validity.

Junya Electronic Technology (Huizhou)

广东骏亚电子科技股份有限公司

Junya 603386 says it runs six plants, yet its registered scope names components and materials, not PCBs. The Huizhou entity has 4,824 staff.

Huizhou multilayerhdi

Founded 2005 · Evidence: Public sources reviewed · Reviewed 2026-11-12

View factory profile

CEE Technology (Zhongjing)

惠州中京电子科技股份有限公司

Zhongjing publishes 2026, 2027 and 2028 columns with sample and mass-production targets. Reading a number without its column quotes a board nobody builds.

Huizhou multilayerhdi

Founded 2000 · Evidence: Public sources reviewed · Reviewed 2026-11-11

View factory profile

Compeq Huizhou (Boluo)

华通电脑(惠州)有限公司

Compeq's 1995 Boluo plant holds 170,000 m2 and 3,200 staff, but the data-centre products sit with the Thai plant, not with Huizhou.

Huizhou rigidmultilayer

Founded 1995 · Evidence: Public sources reviewed · Reviewed 2026-11-11

View factory profile

DBG Technology

惠州光弘科技股份有限公司

DBG runs over 100 SMT lines in 13 bases across eight countries and buys its PCBs. That makes it an assembly candidate, not a PCB enquiry.

Huizhou

Founded 1995 · Evidence: Public sources reviewed · Reviewed 2026-11-11

View factory profile

Huizhou Glorysky Electronics

惠州市特创电子科技股份有限公司

Glorysky's process table runs three year columns: 32 layers now, 36 in 2027 and 78 in 2028. Directories quote the last column as if it were today.

Huizhou rigidmultilayer

Founded 2010 · Evidence: Public sources reviewed · Reviewed 2026-11-11

View factory profile

Kingshine (Kexiang)

广东科翔电子科技股份有限公司

Kingshine's website carries placeholder text and a Beijing phone number for a Huizhou company. Its real process numbers sit in a sponsor's supervision report.

Huizhou multilayerhdi

Founded 2001 · Evidence: Public sources reviewed · Reviewed 2026-11-11

View factory profile

Victory Giant Technology

胜宏科技(惠州)股份有限公司

Victory Giant publishes layer counts and build-ups but no line, drill or panel table. Its HDI numbers also differ between the website and the IPO coverage.

Huizhou multilayerhdi

Founded 2006 · Evidence: Public sources reviewed · Reviewed 2026-11-11

View factory profile