Factory profile · Public sources reviewed

Victory Giant Technology

胜宏科技(惠州)股份有限公司 · Huizhou, Guangdong · Founded 2006 · SZSE ChiNext 300476, and HKEX 2476 since April 2026

Victory Giant publishes layer counts and build-ups but no line, drill or panel table. Its HDI numbers also differ between the website and the IPO coverage.

Victory Giant is a serious candidate for high-layer-count boards and high-order HDI at volume, and it has the balance sheet to expand. The reason to proceed carefully is documentation: the site states layer counts and build-ups but not line width, drill, panel or copper.

Identity and record

Only entries that were checked against a source are shown. A blank field means we have not confirmed it, not that it does not exist.
Registered name (Chinese) 胜宏科技(惠州)股份有限公司
Registered name (English) Victory Giant Technology (Huizhou) Co., Ltd.
Founded 2006
Listed SZSE ChiNext 300476, and HKEX 2476 since April 2026
Headquarters Huizhou, Guangdong
Production sites Huizhou (Huiyang, Danshui) · Changsha (Hunan) · Yiyang (Hunan) · Thailand · Malaysia · Vietnam (under construction)
Official website https://en.shpcb.com
Evidence levelPublic sources reviewed
Last reviewed2026-11-11
Registered entity and published production sites Registered entity Victory Giant Technology and 4 named production sites, from the disclosures cited on this page. PUBLISHED RECORD Victory Giant Technology 胜宏科技(惠州)股份有限公司 Founded 2006 · SZSE ChiNext 300476, and HKEX 2476 since A… Huizhou Huiyang, Danshui Changsha Hunan Yiyang Hunan Thailand Site 4 +2 more sites named in the profile Source: disclosures cited on this page
Entity and footprint map. Victory Giant Technology and the production sites named in the disclosures cited above.

The public capability page is a list of layer counts

Most factories in this segment publish a grid: layer count, line width, drill, panel, copper, finish. Victory Giant publishes layer counts and build-ups and stops there. 70+ layers in mass production, 100+ as a technical capability, 28-layer HDI with an 8+12+8 build-up in production, and a 30-layer 10+10+10 in validation.

For a buyer, that is one dimension of a design conversation. The other dimensions, which decide whether your stack-up is buildable and at what yield, are not on the page. It does not mean they do not exist; it means they have to be asked for, and the answer should arrive as a process capability sheet with a revision date.

Two HDI stories that do not match

The website describes 28-layer HDI with 8+12+8 in mass production and 30-layer with 10+10+10 under validation. Coverage of the April 2026 Hong Kong listing describes sixth-order 24-layer HDI in mass production and tenth-order 30-layer as a technical capability.

Both can be true at once if the website has moved ahead of the prospectus, or if the two are measured differently, but the numbers are not reconciled in public. A buyer specifying a 26-layer HDI should not assume the answer is a simple yes. Ask which build-up is qualified, at what yield, and on which line.

Where the money is going

The H-share listing priced at HK$209.88 and raised about HK$19.89 billion net on 95.85 million shares, with roughly 74% earmarked for capacity expansion in mainland China. The company already claims annual capacity of 5.16 million m² for boards of 14 layers and above, and 600,000 m² for HDI of sixth order and above.

That tells you where the factory’s attention is. Capacity for high-layer-count and high-order HDI is being scaled hard, which usually produces sharp pricing on the exact product families being added, and less flexibility on everything else. If your board is a 6-layer control card, you are not the customer this expansion is designed for.

Customer concentration is disclosed, and it is high

The prospectus gives the top-five concentration for the first nine months of 2025: Customer A at 29.6% of revenue, Customer B at 10.4% and Customer E at 4.2%. Naming the top customer at close to a third of revenue is unusual disclosure and useful.

It means the factory’s schedule, quality priorities and engineering attention are shaped by one account. A smaller buyer can still get good work, but should expect that expedites and allocation decisions follow that relationship. If your programme is sensitive to allocation during a capacity crunch, this is the number to keep in mind.

The auditor’s reply to the securities regulator sets out which entity makes what: rigid boards at 胜宏科技 in Huizhou, 胜华电子 in Huiyang and 维胜电路板 in Changsha; flex at 维胜科技 in Changsha, 益阳维胜 in Yiyang and MFS Technology in Malaysia. Thailand and Vietnam are rigid PCB subsidiaries.

That is the cleanest plant map in this batch, and it comes from a filing rather than from marketing. If you need a flex circuit rather than a rigid board, the contracting entity changes, and so does the certificate set.

What to send, and what to check

Send the stack-up, layer count, impedance target, panel size and annual quantity. Ask for the process capability sheet for the specific entity and site, and ask which build-up the factory will use for your HDI design rather than quoting the top of the page.

Two checks are worth doing early. Confirm the AS9100 and IATF certificates name the site that will build the order, because the gallery shows group-level images without numbers. And if the program is large, ask how allocation is decided during a capacity constraint, given the disclosed concentration.

What is not established

No minimum line width, minimum drill, maximum panel size, copper-weight range or surface-finish list is published, so those rows are absent from this profile rather than filled in from third-party sources. Certificate numbers are embedded in images and cannot be read. The UL file number and the identity of the entity that holds it are not published.

Published limits

Every value below is quoted as published by the company or a public record.

ParameterValue as published
Max layer count, multilayer PCB in mass production 70+ layers
Max layer count, multilayer PCB technical capability 100+ layers
HDI in mass production 28-layer HDI with 8+12+8 build-up
HDI in validation 30-layer HDI with 10+10+10 build-up
Annual capacity, HDI of sixth order and above 600,000 m² per year
Annual capacity, multilayer PCB of 14 layers and above 5,160,000 m² per year
Huizhou factory site area 547,000 m²
Employees, group More than 20,000

Certifications on record

A certificate covers a legal entity and a site, not a brand. Scope and expiry are recorded where published.

StandardWhat the record shows
IATF 16949:2016 Shown as a certificate image; no number in text
AS9100D Shown as an image titled aerospace quality management system
ISO 13485 Medical device QMS, image only
ISO 9001 Image only
UL Listed as UL safety certification; no file number published
TL 9000 Appears as a certificate image on the same gallery; telecom QMS, no number readable
ISO 45001 and ISO 50001 Appear as certificate images on the same gallery; no numbers readable
ISO 27001 and QC 080000 Appear as certificate images on the same gallery; no numbers readable

Ask this factory for a quote

Send one technical package and compare the replies. The RFQ checklist lists what to include; the quote specifications say which parameters change the price for the process you are buying.

Request a quote

Source and review conventions are described in how we verify. Corrections can be sent through the contact channel.