DBG Technology
惠州光弘科技股份有限公司 · Huizhou, Guangdong · Founded 1995 · SZSE 300735, listed 2017
DBG runs over 100 SMT lines in 13 bases across eight countries and buys its PCBs. That makes it an assembly candidate, not a PCB enquiry.
DBG is a contract manufacturer, so it belongs in a shortlist for assembly, box build or China-plus-one production, not for bare boards: the annual report lists PCB among purchased materials. Its scale is real; the thing to check is which of the thirteen bases will run your product and under which quality system.
Identity and record
| Registered name (Chinese) | 惠州光弘科技股份有限公司 |
|---|---|
| Registered name (English) | DBG Technology Co., Ltd. |
| Founded | 1995 |
| Listed | SZSE 300735, listed 2017 |
| Headquarters | Huizhou, Guangdong |
| Production sites | Huizhou · Shenzhen (Pingshan) · Jiaxing · Shanghai · India · Vietnam · Bangladesh · France · Mexico · Tunisia |
| Official website | https://www.dbg.ltd |
| Evidence level | Public sources reviewed |
| Last reviewed | 2026-11-11 |
This is an assembly company
DBG does not make printed circuit boards. Its annual report lists PCB among the main purchased materials, alongside electronic components, hardware and plastic parts. It assembles, tests and builds boxes for other people’s products, which is a different business from the one most pages in this directory describe.
That matters because a foreign buyer searching for a “China PCB supplier” will find DBG, see a listing and a nine-billion-renminbi revenue figure, and send a Gerber package. The reply will either be a referral or a quote that bundles fabrication and assembly without saying which part is subcontracted.
Used correctly, it is a reasonable candidate for a turnkey programme: boards bought in, assembled, tested and shipped.
Scale, in three numbers
More than 100 fully automated SMT lines, more than 30,000 employees, and thirteenth place in the global EMS top 50 for 2025. The group reports RMB 8.994 billion of revenue for 2025, up 30.69%, with net profit attributable to shareholders of RMB 289 million, up 4.75%.
The margin is the interesting part. A 3.2% net margin on assembly work is normal for high-volume consumer EMS, and it tells you what kind of customer the business is built for: large volumes, thin margins, tight cost control. A 500-unit order will be priced accordingly, which usually means a minimum charge rather than a per-unit price.
Thirteen bases, eight countries
The end-2025 footprint is 13 manufacturing bases, 3 R&D centres and 1 logistics centre across eight countries and regions: mainland China, Hong Kong, India, Vietnam, Bangladesh, France, Mexico and Tunisia.
That list is the reason to shortlist a company like this. A China-plus-one requirement, or a rule-of-origin constraint for North America or the EU, can be met by moving the assembly rather than the whole supply chain. The Chinese PCB can stay in China while the box build happens in Mexico or Tunisia, and the customer sees a different country of origin for the finished goods.
The caveat is that a base being on the list does not tell you its maturity. Ask which base, how long it has been running your product class, and what its yield looks like.
Customers, and what they say about the process
The annual report names Huawei, Honor, Xiaomi, Huaqin, Longcheer, Valeo and Nokia, with automotive Tier 1 customers Valeo, Continental and Denso building parts for BMW, Audi, VW and Nissan.
An automotive Tier 1 relationship is the most demanding item on that list, because it brings IATF process discipline, PPAP and traceability requirements down to the assembly line. If your product is automotive and you need a contract manufacturer with that experience, this is relevant evidence. If your product is a consumer device with a six-week lifecycle, the consumer names matter more.
Pingshan is the newest domestic base
The Shenzhen Pingshan smart manufacturing base began phased operation in September 2025. A new base is where a new customer is most likely to be placed, and also where a process is least settled. Ask for the line qualification record if your order is allocated there.
How to use this profile
Use DBG for assembly, test and box build, and keep your PCB supplier separate until you have compared the two routes. Ask for the manufacturing site, the line count dedicated to your product class, and the test strategy: ICT, flying probe, functional or none.
Ask three commercial questions that decide the real cost: who buys the components and carries the inventory risk, what the minimum order quantity is per build, and how engineering changes are handled after the first shipment.
What is not established
No per-plant SMT line count is published; the “over 100” is a group figure. No unit capacity per month is disclosed for any product class. Customer volumes and contract values are not public. And because DBG is not a fabricator, PCB process metrics such as layer count, line width and drill do not apply to it at all, which is why this profile carries no capability table.
Published limits
Every value below is quoted as published by the company or a public record.
| Parameter | Value as published |
|---|---|
| Fully automated SMT lines | More than 100, group-wide |
| Employees worldwide | More than 30,000 |
| Global EMS ranking, 2025 | 14th in the global top 50 |
| Manufacturing footprint, end-2025 | 13 manufacturing bases, 3 R&D centres, 1 logistics centre |
| Countries and regions with operations | 8: mainland China, Hong Kong, India, Vietnam, Bangladesh, France, Mexico, Tunisia |
| Patents and software copyrights | 91 patents, 19 software copyrights |
| Revenue, 2025 | RMB 8.994 billion, up 30.69% |
| Shenzhen Pingshan base | Phased operation from September 2025 |
Certifications on record
A certificate covers a legal entity and a site, not a brand. Scope and expiry are recorded where published.
| Standard | What the record shows |
|---|---|
| IATF 16949 | Named in the 2025 annual report and on the automotive market page |
| ISO 13485 | Named in the 2025 annual report; medical device QMS |
| ISO 9001 | Named in the 2025 annual report |
| ISO 14001 | Named in the 2025 annual report |
| ISO 45001 | Named in the 2025 annual report |
| ANSI/ESD S20.20 | ESD control programme, named in the 2025 annual report |
Ask this factory for a quote
Send one technical package and compare the replies. The RFQ checklist lists what to include; the quote specifications say which parameters change the price for the process you are buying.
Source and review conventions are described in how we verify. Corrections can be sent through the contact channel.