Factory profile · Public sources reviewed

SEIC (Shenzhen Shinelong Electronics)

深圳先隆电子实业有限公司 · Shenzhen, Guangdong · Founded 1997 · Not listed; Sino-Japan joint venture

SEIC pages say 75, 400 or 500 staff and put the plant at 1,800 or 12,000 square metres. A buyer's question list built from the differences.

SEIC is a real Longgang PCBA assembler with named SMT and DIP lines, a 1997 entity and versioned ISO certificates. Its own pages give three headcounts, three floor areas and two DIP line counts, with no period or site attached. Good for SMT, DIP and box build; the summary numbers are not one consistent capacity claim.

Identity and record

Only entries that were checked against a source are shown. A blank field means we have not confirmed it, not that it does not exist.
Registered name (Chinese) 深圳先隆电子实业有限公司
Registered name (English) Shenzhen Shinelong Electronics Industrial Co., Ltd.
Founded 1997
Listed Not listed; Sino-Japan joint venture
Headquarters Shenzhen, Guangdong
Production sites Shenzhen (Longgang, Baolong)
Unified social credit code 9144030061892327XY
Official website https://www.seic.com.cn/
Evidence levelPublic sources reviewed
Last reviewed2026-11-19
Registered entity and published production sites Registered entity SEIC (Shenzhen Shinelong Electronics) and 1 named production sites, from the disclosures cited on this page. PUBLISHED RECORD SEIC (Shenzhen Shinelong Electron… 深圳先隆电子实业有限公司 Founded 1997 · Not listed; Sino-Japan joint venture Shenzhen Longgang, Baolong Source: disclosures cited on this page
Entity and footprint map. SEIC (Shenzhen Shinelong Electronics) and the production sites named in the disclosures cited above.

A Shenzhen assembler can publish a great deal about itself and still leave a buyer unable to say how big it is. SEIC’s own pages give three different headcounts, three different floor areas and two different DIP line counts. The assembly equipment is described consistently; the summary numbers are not. This page lists what each page says and where the shareholder and the operating company part company.

The headcount changes with the page

The English home page puts 75 or more employees and 61 or more engineers in its facts strip. The Chinese version of the same strip says 500 or more employees and 100 or more engineers. Neither page gives a date, a site breakdown or a definition of who is counted.

The About page takes a third position: 400 staff, of whom 80 work in product design, engineering and quality control. Further down the Chinese About page, the advantages list describes a supply chain team of nearly 20, a 26-engineer team and a customer service team of nearly 12. A recruitment listing puts the group at 500 to 999 people. These can all be true at different dates or under different definitions, but the site supplies no bridge between them.

The floor area has three figures

The English facts strip gives 1,800 square metres of plant area. Both About pages describe 12,000 square metres of production floor. The services page goes further, describing a 100,000 square metre dust-free SMT workshop containing 3,000 square metres of SMT space and an 800 square metre DIP workshop.

A 100,000 square metre figure is larger than the 12,000 square metre site by nearly an order of magnitude. The services page does not say whether it means a building, a campus or a translated unit. A buyer planning an audit needs one number tied to one address before treating any of the three as the size of the plant that will build the order.

Two DIP lines or twenty

The Chinese home page and the About page both state 20 semi-automatic DIP assembly and test lines. The services page states two professional DIP plug-in lines with a daily insertion capacity of one million points. Seven full-automatic SMT lines are given on the Chinese home page; the About pages say only that there are several advanced SMT machines.

The 20-line and two-line claims may describe different things — test stations against plug-in lines, or a group total against one workshop. The site does not say. The equipment list on the About page names horizontal and vertical dual-head insertion machines, reflow and wave soldering machines, AOI, online ICT and multifunction FCT testers, and automatic conformal coating equipment. That list is specific enough to be useful; the line counts attached to it are not.

Two addresses, one operating company

The Shenzhen entity is registered in Baolong Street, Longgang District, at Baolong Zhizao Park. The company’s own Chinese About page gives the same park with a street name that differs slightly from the registry. Both point to the Longgang site.

The parent group’s corporate outline still lists the operating company at an industrial building in Xili, Nanshan District. Two brand directories repeat that older address. The Rexxam page does not say when the move happened. A buyer should ask which address appears on the quotation, which one receives incoming boards and which one the audit visit should use.

The joint venture is not the buyer of record

SEIC is presented as a Sino-Japan joint venture invested by Rexxam Co., Ltd. of Japan and Suzhou Sanlong Trading Co., Ltd. The parent was founded in Osaka in 1960 and employs 1,310 people in Japan; it develops controllers, medical instruments, automotive parts and other products, and lists Daikin, Panasonic and Mitsubishi among its customers. The Shenzhen operating company was registered on 1997-01-10 with RMB 8 million capital, USCC 9144030061892327XY and legal representative Okano Shinji.

Those are two different entities. The group’s customer list and history belong to the Japanese parent; the ISO certificates, AEO status and factory address belong to the Shenzhen company. A purchase order should name the latter. The group-level brand is useful context, not proof of which plant runs the line.

The registered scope stops at assembly

The licensed business scope covers the manufacture of electronic products, controllers and components, with audio products wholly and other products largely for export. Nothing in that scope names bare-board fabrication. The equipment list is consistent with it: insertion, placement, soldering, coating and test, but no drilling, lamination, plating or etching machine.

SEIC offers PCB design and describes a one-stop flow from design and component purchasing through placement, DIP, assembly and test. That is an assembly service built on boards made elsewhere. A buyer needing the bare board itself should ask which company fabricates it and who issues that invoice.

The certificates carry versions, not numbers

The About pages name ISO 9001:2015, ISO 14001:2015 and ISO 45001:2018. The Chinese page adds Shenzhen Customs AEO advanced certification, AAA credit enterprise status and repeated selection among Guangdong’s top 500 manufacturers. The standard versions are specific. The certificate numbers, issuing bodies, expiry dates and the years of the Guangdong listing are not published in text.

The home pages state a product delivery pass rate of 99.5 percent without defining the period or the order mix. Ask for the certificates and read the holder line against the registered company name before crediting any of them to the group.

What to verify first

  • Which headcount and floor area apply to the Longgang plant, and at what date.
  • Whether the 20 DIP lines and the two DIP lines describe the same workshop.
  • Which address receives incoming boards and which one appears on the quotation.
  • Whether the bare board is made in-house or purchased, and which entity invoices it.
  • Certificate numbers, holders and expiry dates for the three ISO standards and the customs certifications.

What is not established

  • No published statement reconciles the 75, 400 and 500 employee figures.
  • No published statement reconciles the 1,800, 12,000 and 100,000 square metre figures.
  • No bare-board fabrication equipment or licensed fabrication scope was found in the sources reviewed.
  • No certificate number or expiry date was found for any of the three ISO standards.
  • No date was found for the move from the Nanshan address to the Longgang plant.

Published limits

Every value below is quoted as published by the company or a public record.

ParameterValue as published
Headcount, English home page 75+ employees and 61+ engineers stated in the plant facts strip on the English home page
Headcount, Chinese home page 500+ employees and 100+ engineers stated in the same strip on the Chinese home page
Headcount, company profile 400 staff, of whom 80 work in product design, engineering and quality control, on the About page
Headcount, advantage section 26 engineers and a customer service team of nearly 12 named in the Chinese About page advantages list
Floor area, English home page 1,800 square metres given as plant area in the English home page facts strip
Floor area, company profile 12,000 square metres of production area stated on both language versions of the About page
Floor area, services page A 100,000 square metre dust-free SMT workshop containing 3,000 square metres of SMT space, plus 800 square metres of DIP
DIP lines, home and profile 20 semi-automatic DIP assembly and test lines stated on the Chinese home and About pages
DIP lines, services page Two professional DIP plug-in lines at one million points per day stated on the services page
SMT placement lines 7 full-automatic SMT lines stated on the Chinese home page; the About pages say multiple advanced SMT machines
Insertion and soldering equipment Horizontal and vertical dual-head automatic insertion machines, automatic reflow and wave soldering machines
Inspection and test equipment Automatic PCB conformal coating equipment, AOI optical inspection, online ICT testers and multifunction FCT testers
Production systems Japanese 6S management with ERP and MES deployed for online production information management
Registered entity Registered 1997-01-10; RMB 8m capital; USCC 9144030061892327XY; legal representative Okano Shinji
Registered address Baolong Zhizao Park, Longgang District; an older Xili, Nanshan address still appears on the parent group's site
Joint venture shareholders Invested by Rexxam Co., Ltd. of Japan and Suzhou Sanlong Trading Co., Ltd.
Registered business scope Licensed scope covers electronic products, controllers and components, with most output for export
Delivery quality claim Product delivery pass rate stated at 99.5 percent on both home pages
Three headcounts on one website Bar chart of 3 published figures in employees stated on different pages of the same site. The English home page says 75+, the Chinese home page 500+, and the About page 400. No page states a date or whether contractors are included. English home 75+ Plant facts strip Chinese home 500+ Plant facts strip About page 400 Company profile
Three headcounts on one website. employees stated on different pages of the same site. The English home page says 75+, the Chinese home page 500+, and the About page 400. No page states a date or whether contractors are included. Source: English home, Chinese home and company profile.

Certifications on record

A certificate covers a legal entity and a site, not a brand. Scope and expiry are recorded where published.

StandardWhat the record shows
ISO 9001:2015 Standard and version stated on the About page; no certificate number, issuing body or expiry appears in text.
ISO 14001:2015 Standard and version stated on the About page; no certificate number, issuing body or expiry appears in text.
ISO 45001:2018 Standard and version stated on the About page; no certificate number, issuing body or expiry appears in text.
AEO Advanced Certified Enterprise Shenzhen Customs AEO advanced certification named in the Chinese About page; no certificate number or date published.
Shenzhen Customs AAA credit AAA credit enterprise of Shenzhen Customs named in the Chinese About page; no rating period or certificate number published.
Guangdong Top 500 Manufacturing Described as selected for many consecutive years; no specific year or publishing body given in text.

Ask this factory for a quote

Send one technical package and compare the replies. The RFQ checklist lists what to include; the quote specifications say which parameters change the price for the process you are buying.

Request a quote

Source and review conventions are described in how we verify. Corrections can be sent through the contact channel.