Factory profile · Public sources reviewed

Kaifa (Shenzhen Kaifa)

深圳长城开发科技股份有限公司 · Shenzhen, Guangdong · Founded 1985 · SZSE 000021, listed February 1994

Kaifa's filing publishes its credit code, 150-plus SMT lines and a 15,000 m2 cleanroom. It is an EMS group, and its plant list depends on which page you read.

Kaifa is a reasonable shortlist entry for assembly of a metering, storage or medical product, with a cleanroom, a central lab and a state-owned parent behind it. It is not a bare-board supplier. The unusual feature is verifiability: credit code, headcount and plant list all sit in a filing.

Identity and record

Only entries that were checked against a source are shown. A blank field means we have not confirmed it, not that it does not exist.
Registered name (Chinese) 深圳长城开发科技股份有限公司
Registered name (English) Shenzhen Kaifa Technology Co., Ltd.
Founded 1985
Listed SZSE 000021, listed February 1994
Headquarters Shenzhen, Guangdong
Production sites Shenzhen · Suzhou · Dongguan · Chongqing · Chengdu · Hefei · Malaysia
Unified social credit code 91440300618873567Y
Official website https://www.kaifa.cn
Evidence levelPublic sources reviewed
Last reviewed2026-11-11
Registered entity and published production sites Registered entity Kaifa (Shenzhen Kaifa) and 4 named production sites, from the disclosures cited on this page. PUBLISHED RECORD Kaifa (Shenzhen Kaifa) 深圳长城开发科技股份有限公司 Founded 1985 · SZSE 000021, listed February 1994 Shenzhen Site 1 Suzhou Site 2 Dongguan Site 3 Chongqing Site 4 +3 more sites named in the profile Source: disclosures cited on this page
Entity and footprint map. Kaifa (Shenzhen Kaifa) and the production sites named in the disclosures cited above.

Start with the credit code

The 2025 annual report publishes the unified social credit code 91440300618873567Y and the registered address, 7006 Caitian Road, Futian District, Shenzhen 518035. That is unusual and useful: a buyer can check the entity in the national credit system before spending time on a call, and the code will match the one on the business licence.

The company was registered on 4 July 1985 as 开发科技(蛇口)有限公司, converted to a joint-stock company in October 1993, and listed on the Shenzhen exchange in February 1994. China Electronics Corporation, the central state-owned electronics group, is the controlling shareholder and actual controller.

For a foreign buyer, a state-owned EMS provider with a forty-year history is a low-risk counterparty on paper, and a slow one on process. Expect formal approvals and a documented supplier onboarding.

What it actually does

One-stop electronics manufacturing across computers and storage, communications, consumer electronics, semiconductor packaging and test, medical devices, automotive electronics, industrial products, utility metering and IoT. The utility metering business is worth noting because it is a niche where Chinese manufacturers have led for decades, and it drives a particular kind of reliability requirement.

Output figures are published and specific: 50 million smartphones a year, 30 million storage modules a year, 45 million DRAM and flash packages a month. A 15,000 m² cleanroom rated from Class 10,000 to Class 100 supports the medical and storage work.

The numbers are group figures

More than 150 SMT lines, more than 490,000 m² of site across nine bases, 29,330 employees. None of these are per plant. A buyer with a 20,000-unit programme needs the line count and headcount of one site, not of nine.

The headcount itself is a small lesson in why filings beat websites: the company’s own site says more than 25,000 staff, while the annual report states 29,330 at 31 December 2025. Use the filing.

A central lab, which is the useful part

The company runs a technical research and central laboratory set up in 1992, with six specialist labs and two engineering groups spread across Shenzhen, Dongguan, Suzhou, Chengdu, Chongqing, Hefei and Malaysia. The published scope is failure analysis rather than incoming inspection: X-ray and CT, C-SAM, solder-joint cross-sections, material composition, vibration and resonance testing, and ESD control.

For an EMS that buys boards rather than making them, this is the capability that decides how a defect gets closed. A solder-joint failure on a 0.4 mm pitch BGA is resolved by cross-sectioning the joint and reading the intermetallic layer, not by swapping the panel — and a supplier without a lab sends the question back to you.

Two different plant lists

The English About page lists nine bases: Shenzhen, Suzhou, Huizhou, Dongguan, Chengdu, Chongqing, Guilin, Malaysia and the Philippines. The 2025 annual report lists Shenzhen, Suzhou, Dongguan, Chongqing, Chengdu, Hefei and Malaysia, plus a new-product introduction base in the United States.

Huizhou and Guilin appear in one, Hefei in the other. That is the kind of discrepancy that comes from a site being closed, sold or absorbed without the website being updated. Before allocating a programme to a city, confirm the site is operating.

Certifications without numbers

The annual report names ISO 9001, IATF 16949, ISO 13485, QC 080000, ISO 27001, ISO 22301, ISO 14001 and ISO 14064 as systems in place. No certificate number, validity date or issuing body is published, and no scope is given, so the question of which site holds which certificate is open.

For a medical or automotive programme, that is the first document request. The breadth of the list is reassuring; the absence of identifiers is not.

How to use this profile

Send the BOM, the assembly drawing, the test requirement and the annual volume. Ask which site and which subsidiary will quote, since a group this size usually contracts through an operating company rather than the listed parent.

Ask four things in writing: the certificate numbers and the sites they cover, the line count dedicated to your product class, the test strategy and fixture ownership, and whether component sourcing is turnkey or consigned. On a metering or medical product, add the traceability requirement and how unit-level records are retained.

What is not established

No per-site SMT line count, floor area or headcount. No PCB fabrication capability, because this is an EMS and memory-module business rather than a board house. No certificate numbers or validity dates. No unit capacities per site, and no customer concentration.

Published limits

Every value below is quoted as published by the company or a public record.

ParameterValue as published
SMT production lines More than 150, group-wide
Cleanroom 15,000 m², Class 10,000 to Class 100
R&D and manufacturing bases Nine, including sites in China, Malaysia and the Philippines
Total site area More than 490,000 m²
Smartphone output 50 million units per year
Semiconductor storage module output 30 million units per year
DRAM and flash packaging capacity 45 million units per month
Employees, 31 December 2025 29,330
Revenue and net profit, 2025 RMB 15.75 billion, up 6.21%; net profit RMB 1.14 billion, up 22.07%

Certifications on record

A certificate covers a legal entity and a site, not a brand. Scope and expiry are recorded where published.

StandardWhat the record shows
ISO 9001 Listed among the management systems adopted in the 2025 annual report; no number or scope
IATF 16949 Named in the same annual-report statement
ISO 13485 Named in the same statement; medical device QMS
QC 080000 Hazardous substance process control, named in the same statement
ISO 27001 and ISO 22301 Information security and business continuity
ISO 14001 and ISO 14064 Environmental management and greenhouse-gas quantification

Ask this factory for a quote

Send one technical package and compare the replies. The RFQ checklist lists what to include; the quote specifications say which parameters change the price for the process you are buying.

Request a quote

Source and review conventions are described in how we verify. Corrections can be sent through the contact channel.