Factory profile · Public sources reviewed

Suntak Technology

崇达技术股份有限公司 · Shenzhen, Guangdong · Founded 1995 · SZSE 002815

Suntak publishes no capability table. Its layer and line figures exist only in annual-report prose, and substrate work sits in a partly owned subsidiary.

Use Suntak when you want a five-plant manufacturer that splits high-volume industrial work from phone-class HDI work by site, and you are willing to run the qualification yourself. Do not use its website to qualify it: there is no process table, so every number has to come from a filing or from the factory directly.

Identity and record

Only entries that were checked against a source are shown. A blank field means we have not confirmed it, not that it does not exist.
Registered name (Chinese) 崇达技术股份有限公司
Registered name (English) Suntak Technology Co., Ltd.
Founded 1995
Listed SZSE 002815
Headquarters Shenzhen, Guangdong
Production sites Shenzhen (FPC) · Zhuhai (phases 1 and 2) · Jiangmen (plants 1 and 2) · Dalian (Jinzhou) · Kunshan (IC substrate, via Pnovo) · Thailand (Prachin Buri, under construction)
Official website https://www.suntakpcb.com
Evidence levelPublic sources reviewed
Last reviewed2026-11-11
Registered entity and published production sites Registered entity Suntak Technology and 4 named production sites, from the disclosures cited on this page. PUBLISHED RECORD Suntak Technology 崇达技术股份有限公司 Founded 1995 · SZSE 002815 Shenzhen FPC Zhuhai phases 1 and 2 Jiangmen plants 1 and 2 Dalian Jinzhou +2 more sites named in the profile Source: disclosures cited on this page
Entity and footprint map. Suntak Technology and the production sites named in the disclosures cited above.

The website will not qualify this supplier, and that is the first finding

Most Chinese PCB factories publish a capability page with layer counts, trace widths and panel sizes. Suntak’s site does not. There is a company profile, a factory list and an English landing page stating that IATF 16949 was obtained in 2005, but no numeric process table anywhere on the public site.

That is unusual enough to be a buying signal in itself. Either the numbers are not considered marketing material, or the site has not been maintained. The practical consequence is that every capability figure in this profile comes from the annual report’s prose, which is written for investors rather than for design engineers: 68 layers maximum in mass production, HDI at one to five steps, and substrate limits that belong to a company Suntak only partly owns.

Five plants, and two of them have a job description

The annual report is unusually explicit about what each site is for, and this is the most useful part of the record. Jiangmen plant 1 carries industrial control, automotive, EMS and medical work as the high-volume site. Jiangmen plant 2 is positioned for HDI, rigid-flex and thin boards for phones, LED displays and tablets. Zhuhai is the newer, larger build-out: 400 mu of land, a designed annual capacity of 6.4 million m² across three phases, with plant 2 starting production in June 2024 and adding 120,000 m² per month of high-layer-count capacity aimed at servers and communications.

Dalian handles the northern book. Shenzhen holds the FPC plant. A buyer with an automotive control board and a buyer with a phone mainboard are therefore not talking to the same factory even when they are talking to the same company, and the quote should name the site.

The substrate line is not Suntak’s to promise

12/12 μm line width, 25 μm trace pitch and 0.11 mm finished thickness are substrate figures, and they belong to 江苏普诺威电子, in which Suntak holds 47.79%. Pnovo is consolidated but separately listed on the NEEQ under 875148 and has applied for a Beijing Stock Exchange listing. A purchase order placed with the parent for substrate work will be executed by an entity with its own shareholders, its own auditors and its own capacity commitments.

This structure is common and not improper. It does mean that a substrate enquiry should ask which legal person contracts, and that due diligence on the subsidiary is not covered by reading the parent’s annual report. Suntak’s own plants do not make substrate; they make boards.

Quoting without a published table

Because there is no table, the RFQ has to carry the specification work. Send the stack-up, the target impedance with tolerance, the panel utilisation you expect, the surface finish, and the annual quantity split by model. Ask for the process capability sheet for the specific site as an attachment rather than a link, and ask which of the five plants the file was written for.

Two questions are worth asking early. First, whether the order will be built at Jiangmen plant 1 or Zhuhai, since the two have different volume economics and different layer ceilings in practice even though the group number is 68. Second, whether the Thailand subsidiary, registered in August 2025 with 70 rai of land, is intended to take any of the volume, because a site that is still being built cannot be qualified by a first article.

What the record does not show

No UL file number is published, and UL listing is per legal entity and per plant, so the parent’s brand tells you nothing about which site is listed. No per-plant layer maximum, panel size or surface-finish list is published; the factory pages give floor area, headcount, product focus and monthly capacity instead. ISO 14001 and ISO 13485 are not stated anywhere we could find, which is a gap that matters for a medical or an environmental-procurement programme. The IATF certificate is described only as obtained in 2005, with no number, so the scope has to be requested as a document.

Published limits

Every value below is quoted as published by the company or a public record.

ParameterValue as published
Max mass-production layer count, high-layer-count PCB 68 layers
HDI mass-production capability 1 to 5 steps (1–5阶)
Min line width and spacing, IC substrate (Pnovo) 12/12 μm
Trace pitch, SiP substrate line (Pnovo) 25 μm
Min finished board thickness, SiP substrate (Pnovo) 0.11 mm
Zhuhai site, designed annual capacity 6.4 million m² of boards, built in three phases on 400 mu of land
Zhuhai plant 2, added June 2024 120,000 m² per month of high-layer-count capacity
Thailand subsidiary, registered August 2025 70 rai of land (about 112,000 m²), registered capital THB 1 billion

Certifications on record

A certificate covers a legal entity and a site, not a brand. Scope and expiry are recorded where published.

StandardWhat the record shows
IATF 16949 The English site states the certificate was first obtained in 2005; no number, scope or issuing body is published
UL No file number published on the site or in the annual report; check UL Product iQ against the legal entity

Ask this factory for a quote

Send one technical package and compare the replies. The RFQ checklist lists what to include; the quote specifications say which parameters change the price for the process you are buying.

Request a quote

Source and review conventions are described in how we verify. Corrections can be sent through the contact channel.