Factory profile · Public sources reviewed

S&L Circuits (Sunly PCB)

深圳市深联电路有限公司 · Shenzhen, Guangdong · Founded 2002 · Not listed

The same Shenzhen manufacturer appears as S&L Circuits, Sun&Lynn and Sunly PCB. Its certificate count differs by page, and its plants are split by board type.

A privately held group with a clear split between high-density work in Shenzhen and volume HDI in Ganzhou, and a capability table that is specific enough to quote from. The reason to be careful is identity, not capability: three English names circulate for this company and the certificate count changes with the page.

Identity and record

Only entries that were checked against a source are shown. A blank field means we have not confirmed it, not that it does not exist.
Registered name (Chinese) 深圳市深联电路有限公司
Registered name (English) Shenzhen Shenlian Circuit Co., Ltd. (S&L Circuits)
Founded 2002
Listed Not listed
Headquarters Shenzhen, Guangdong
Production sites Shenzhen (Bao'an, Shajing) · Ganzhou (Jiangxi) · Zhuhai (Doumen)
Official website https://www.slpcb.com
Evidence levelPublic sources reviewed
Last reviewed2026-11-11
Registered entity and published production sites Registered entity S&L Circuits (Sunly PCB) and 3 named production sites, from the disclosures cited on this page. PUBLISHED RECORD S&L Circuits (Sunly PCB) 深圳市深联电路有限公司 Founded 2002 · Not listed Shenzhen Bao'an, Shajing Ganzhou Jiangxi Zhuhai Doumen Source: disclosures cited on this page
Entity and footprint map. S&L Circuits (Sunly PCB) and the production sites named in the disclosures cited above.

Three names, and a contract that needs one

Search for this manufacturer and you will find S&L Circuits, Sun&Lynn Circuits and Sunly PCB. The legal entity is 深圳市深联电路有限公司, registered in 2002 as 深联线路 and renamed in 2006. The English-language site uses the first two names; the third is how third-party directories render the Chinese name, and it is the name many foreign buyers have on file.

None of this is fraud, but it creates a specific risk: a purchase order, an NDA or a certificate copy can end up addressed to a trading name rather than the legal person, and a certificate issued to 深圳市深联电路有限公司 does not cover a contract signed with “Sunly PCB”. Put the Chinese name on the first page of the RFQ and ask for the business licence scan; that single step resolves the confusion permanently.

The group also states RMB 6 billion of total investment, about 114,000 m² of plant land and 5,600 employees including 400 engineers with more than 20 years of PCB experience. Those are company figures, not audited ones, and the headcount is the kind of number that is worth asking about again at the plant visit.

The plant split is the genuinely useful part

Unlike most groups that publish one merged table, this one states capacity per site, and the split describes three different factories. Shenzhen, at 80,000 m² per month, is positioned for high-density multilayer, metal-base, high-frequency mixed lamination and thick copper. Ganzhou, at 400,000 m² per month, carries HDI, through-hole, FPC and rigid-flex. Zhuhai, at 300,000 m² per month, does through-hole and HDI, with a group total of 780,000 m².

A sister site breaks Ganzhou down further: plant 1 for HDI and through-hole at 80,000 m², plant 2 as an Industry 4.0 high-volume through-hole site at 250,000 m², plant 3 for FPC and rigid-flex at 70,000 m². If that breakdown is right, Ganzhou is where a volume through-hole order belongs and Shenzhen is where a mixed-material high-frequency stack belongs. Ask which site is quoted, then ask for the capacity number for that site rather than the group total.

Certificates: pick a number, then check it

The company’s pages do not agree on how many certificates it holds. The slpcb.com home page says eight international systems; the slpcb.cn profile says twelve; the profile page lists nine by name. All three can be literally true if some are counted at group level and some at plant level, but a buyer cannot tell which.

What the record does support is a sequence with dates: UL for single and double-sided boards in December 2003, UL multilayer in November 2005, ISO/TS 16949 at the Ganzhou plant in December 2013, ISO 13485 in May 2013, and UL rigid-flex in June 2016. Dated entries are more useful than a count, because they show the order in which the quality system was extended to new processes. The UL file number itself is still not published, so UL Product iQ has to confirm it.

GJB on a commercial directory

The GJB listing is worth a note because it means the Chinese military standard, and it appears on a page aimed at commercial buyers without a scope statement. In practice GJB certification is granted per product and per process, not as a general badge, and a commercial customer should not read it as indicating anything about its own order. It does suggest the company runs documentation and traceability controls beyond what a consumer-board plant needs.

Where this profile is weak

There is a fourth manufacturing base, Thailand, named on one company page and absent from the profile page that lists Shenzhen, Ganzhou and Zhuhai. A site that appears on one page and not another cannot be qualified from the website. The capability table is group-level, so the 48-layer figure is not tied to a plant, and the PCB, HDI and FPC tables are separate documents. Finally, the English site never states which legal entity operates it, which is exactly how the three-name problem started.

Published limits

Every value below is quoted as published by the company or a public record.

ParameterValue as published
Layer count, standard / advanced 40 / 48 layers
Board thickness, standard / advanced 5.5 / 6.5 mm
Aspect ratio, standard / advanced 10:1 / 14:1
Copper thickness, standard / advanced 6 oz / 12 oz
Min line width and spacing, standard / advanced 0.075/0.075 mm / 0.065/0.065 mm
Min hole and pad, standard / advanced 0.20/0.40 mm / 0.15/0.35 mm
HDI build-up, standard / advanced 3+N+3 / anylayer
Min blind via, HDI 0.10 mm / 0.09 mm
Min CSP/BGA pitch, HDI 0.40 mm / 0.35 mm
Impedance tolerance, differential ±8% / ±6%
Stated plant capacity, Shenzhen / Ganzhou / Zhuhai 80,000 / 400,000 / 300,000 m² per month, group total 780,000
Max single panel, 1-layer board 500 × 2000 mm standard, 540 × 2000 mm advanced
Capacity stated per site, not as one group number Bar chart of 3 published figures in square metres per month, by plant. The corporate site gives capacity per site: Shenzhen 80,000, Ganzhou 400,000 and Zhuhai 300,000 m2 a month. The three add to its published 780,000 group total; the finer Ganzhou split is kept off this chart. Shenzhen 80,000 m2 high-density multilayer, metal-base and thick copper Ganzhou 400,000 m2 HDI, through-hole, FPC and rigid-flex Zhuhai 300,000 m2 through-hole and HDI
Capacity stated per site, not as one group number. square metres per month, by plant. The corporate site gives capacity per site: Shenzhen 80,000, Ganzhou 400,000 and Zhuhai 300,000 m2 a month. The three add to its published 780,000 group total; the finer Ganzhou split is kept off this chart. Source: corporate site plant capacity table.

Certifications on record

A certificate covers a legal entity and a site, not a brand. Scope and expiry are recorded where published.

StandardWhat the record shows
IATF 16949 Listed in the certification sequence; the roadmap page dates the Ganzhou plant certificate to December 2013
ISO 13485 Listed; roadmap dates it to May 2013
UL Listed without a file number; the roadmap dates UL multilayer to November 2005 and UL rigid-flex to June 2016
GJB (Chinese military standard) Named among the certifications; scope and certificate not published
IECQ QC080000 Listed in the certification sequence
EICC / RBA Listed as EICC, the former name of the Responsible Business Alliance code

Ask this factory for a quote

Send one technical package and compare the replies. The RFQ checklist lists what to include; the quote specifications say which parameters change the price for the process you are buying.

Request a quote

Source and review conventions are described in how we verify. Corrections can be sent through the contact channel.