Factory profile · Public sources reviewed

Reyhelm Electronics (Ji'an)

吉安市瑞鸿电子有限公司 · Founded 2015 · Not listed (private)

The Chinese site says 150 staff and 50,000 m2 a month; the English site says 300 staff and 30,000 m2, and neither version is marked as current.

Fits 4 to 12 layer FR-4, aluminium and rigid-flex work where the buyer confirms figures in writing. Does not fit anyone who reads the English site as the plant: its 10,000 m2, 300 staff and 30,000 m2 a month conflict with the Chinese site, and no certificate carries a number or scope.

Identity and record

Only entries that were checked against a source are shown. A blank field means we have not confirmed it, not that it does not exist.
Registered name (Chinese) 吉安市瑞鸿电子有限公司
Founded 2015
Listed Not listed (private)
Production sites Ji'an
Official website http://www.reyhelm.com
Evidence levelPublic sources reviewed
Last reviewed2026-11-11
Registered entity and published production sites Registered entity Reyhelm Electronics (Ji'an) and 1 named production sites, from the disclosures cited on this page. PUBLISHED RECORD Reyhelm Electronics (Ji'an) 吉安市瑞鸿电子有限公司 Founded 2015 · Not listed (private) Ji'an Site 1 Source: disclosures cited on this page
Entity and footprint map. Reyhelm Electronics (Ji'an) and the production sites named in the disclosures cited above.

Which language you read decides the factory

Two live pages describe the same Wan’an plant and disagree on its size, its workforce and its output. The Chinese overview gives over 15,000 m2 of floor, over 150 staff and more than 50,000 m2 a month, plus a 300 m2 R&D centre. The English overview gives 10,000-plus m2, 300-plus staff and 30,000-plus m2 a month. The company does not mark either set as current. For an overseas buyer the English page is the version that arrives first, which means the numbers a foreign RFQ is built on are the ones the Chinese site contradicts.

This is not a rounding difference. Floor area, people and monthly output all move in opposite directions at once: the English site is smaller in area and output but larger in headcount. No single correction reconciles them. Ask for one signed plant-data sheet and treat both web pages as unverified until it arrives.

2005, 2013, 2015, 2020 — a relocation, not a founding

The timeline on the profile is a migration, not a birthday. The team dates to July 2005, moved to Foshan in Guangdong in January 2013, answered an investment call and settled in Wan’an, Ji’an in January 2015, and opened a Shenzhen office in 2020. The Ji’an legal person, 吉安市瑞鸿电子有限公司, was registered on 7 January 2015 with RMB 20 million of capital, of which RMB 18.08 million is paid in, and five natural-person shareholders.

So 2005 is the age of the team and 2015 is the age of this factory. The brand Reyhelm belongs to the same entity as the Wan’an company, but a vendor form asking when the plant was established should be answered with 2015. A long process history cannot be assumed from an even longer brand history when the machinery moved counties in between.

Three headcounts, two monthly capacities

Staff is over 150 on the Chinese site, 300-plus on the English site, and 64 insured employees in the 2025 annual-report record, where the company is marked small. Monthly capacity is above 50,000 m2 in Chinese and above 30,000 m2 in English, and neither page says whether the figure covers the Wan’an plant alone or includes outside processing. A county-government notice lists Reyhelm among two completed major industrial projects, which confirms a built site, not a throughput.

Use the 64 insured figure as a prompt, not a verdict: the gap between it and both website counts is documented, but the record does not say what explains it. Ask how many people were on the Wan’an floor last month and how many square metres that floor shipped. One ratio from one month is worth more here than either homepage.

What the product pages actually show

The Chinese catalogue is specific and modest. Page one of the multilayer list shows FR-4 four-, six-, eight- and ten-layer boards; page two adds a twelve-layer board. The aluminium page carries single-sided and double-sided substrate lines. The rigid-flex page shows four-, six-, eight- and ten-layer builds. Quality is stated as IPC-600H with RoHS and REACH controls on the process.

That is the defensible product range. A third-party company blurb adds HDI-PCB and HF-PCB, but the site has no matching product page or parameters, and the source notes say FPC and HDI are only described as available through supporting supply, not as in-house lines. Rigid-flex has its own page and can be read as a real category; HDI cannot. Quote the twelve-layer FR-4 and the single- and double-sided aluminium, then put any HDI request in writing as a question rather than an assumption.

Certificate images, not certificate records

The certification page shows images of a business licence, a high-tech enterprise certificate, ISO 9001, ISO 14001, IATF 16949 and UL. Every one is a picture. No certificate number, issuing body, plant scope, authorised product range or expiry is published, and no UL file number is given. For a programme that needs a UL-marked laminate or an IATF scope tied to the Wan’an address, the page proves only that a certificate image was posted.

The practical consequence is narrow and firm: request the actual documents with numbers and validity dates, and check the legal name on each against 吉安市瑞鸿电子有限公司. A certificate issued to the earlier Foshan entity or to a different name will not cover a Wan’an purchase order.

Foshan to Wan’an: the division of work

The ownership note describes a Shenzhen office in Longgang handling overseas order-taking while production is concentrated at phase two of the Wan’an industrial park. That is the inland-cluster fact this profile can stand behind: the front office stayed near the coast and the factory moved inland under a 2015 investment programme. Nothing in the record gives freight distance, a port, transit time or a lead-time figure, so the address alone supports no delivery claim.

What it does support is a paperwork step. Confirm that the quotation, the invoice and the certificate all name the Wan’an entity, and that the Shenzhen office is only the sales channel. With a 2025 insured count of 64 against website counts of 150 and 300, the buyer should also get the staffing figure in writing rather than infer workforce stability from an inland location.

Who gets a quotation worth auditing

Shortlist this plant for four- to twelve-layer FR-4, single- and double-sided aluminium substrate, and four- to ten-layer rigid-flex, where a private, unlisted supplier is acceptable and the numbers are confirmed before the order. The product pages and the county project listing give it a real, if small, manufacturing footprint.

Pass on it if the enquiry depends on HDI or high-frequency boards as in-house capability, on the English-site figures as fact, or on certificate images as evidence of scope. Two conflicting self-descriptions and a wall of unnumbered certificates are reasons to audit, not reasons to reject, but the audit has to happen first.

Gaps in the record

No unified social credit code, no UL file number, no certificate numbers, no monthly capacity split by site and no verified HDI capability. The Chinese and English plant metrics are printed together rather than reconciled. The 2005 team founding and the 2015 Ji’an registration are both kept, as are the 150, 300-plus and 64 headcounts. The 50,000 and 30,000 m2 monthly figures remain untagged by plant, and no page identifies which language version is current.

Published limits

Every value below is quoted as published by the company or a public record.

ParameterValue as published
Plant and headcount Over 15,000 m2 plant, over 150 staff, plus a 300 m2 R&D centre
Monthly capacity Monthly capacity above 50,000 m2; site does not split Ji'an from Shenzhen
FR4 multilayer range (4-10L) FR-4 four-, six-, eight- and ten-layer boards on page one of the multilayer list
FR4 12-layer board FR-4 twelve-layer board shown on page two of the multilayer list
Aluminum substrate Single-sided and double-sided aluminium substrate product lines
Rigid-flex range Four-, six-, eight- and ten-layer builds on the rigid-flex product page
Quality standard Product to IPC-600H; process controlled to RoHS and REACH requirements
Company timeline Founded July 2005; moved to Foshan January 2013; settled in Ji'an Wan'an January 2015; Shenzhen office 2020
English-site plant metrics English site: 10,000+ m2, 300+ staff, 30,000+ m2 a month; differs from the Chinese site
Management-system scope Certificate page shows licence, high-tech enterprise, ISO9001, ISO14001, IATF16949 and UL images
Two language sites, two capacities Bar chart of 2 published figures in m2 per month, self-described capacity. The Chinese and English sites give different monthly capacities and neither says whether the Wan'an plant alone or outside processing is included. The 2025 registry shows 64 insured staff. No figure is reconciled. Chinese site 50,000 m2 above 50,000 m2 a month, scope unstated English site 30,000 m2 above 30,000 m2 a month, scope unstated
Two language sites, two capacities. m2 per month, self-described capacity. The Chinese and English sites give different monthly capacities and neither says whether the Wan'an plant alone or outside processing is included. The 2025 registry shows 64 insured staff. No figure is reconciled. Source: Chinese and English company sites, 2025 registry.

Certifications on record

A certificate covers a legal entity and a site, not a brand. Scope and expiry are recorded where published.

StandardWhat the record shows
IATF 16949:2016 Certificate image on the certification page; no number, issuer, plant scope or expiry published
ISO 9001:2015 Listed in the profile and shown on the certification page, with no number or expiry
ISO 14001:2015 Environment-system certificate image shown, with no number or scope statement
UL UL certificate image shown; no UL file number or authorised product range published
National high-tech enterprise High-tech enterprise certificate image on the page; no citable official notice or number found

Ask this factory for a quote

Send one technical package and compare the replies. The RFQ checklist lists what to include; the quote specifications say which parameters change the price for the process you are buying.

Request a quote

Source and review conventions are described in how we verify. Corrections can be sent through the contact channel.