Factory profile · Public sources reviewed

Xunjiexing (JXPCB)

深圳市迅捷兴科技股份有限公司 · Shenzhen, Guangdong · Founded 2005 · SSE STAR Market 688655 (2021-05-11)

Xunjiexing's site gives 2.8 million m2 a year, 2.6 million in an article, and 1.84 million when the four plants are added up one by one.

Use Xunjiexing for prototype and small-batch work where a 24-hour two-layer turnaround and a wide material menu matter more than a single big plant. The three published capacity totals differ by a million square metres, so quote against the plant that will actually run the job and ignore the headline number.

Identity and record

Only entries that were checked against a source are shown. A blank field means we have not confirmed it, not that it does not exist.
Registered name (Chinese) 深圳市迅捷兴科技股份有限公司
Registered name (English) Shenzhen Xunjiexing Technology Corp. Ltd.
Founded 2005
Listed SSE STAR Market 688655 (2021-05-11)
Headquarters Shenzhen, Guangdong
Production sites Shenzhen · Xinfeng (Ganzhou) · Zhuhai
Official website https://www.jxpcb.com/
Evidence levelPublic sources reviewed
Last reviewed2026-11-11
Registered entity and published production sites Registered entity Xunjiexing (JXPCB) and 3 named production sites, from the disclosures cited on this page. PUBLISHED RECORD Xunjiexing (JXPCB) 深圳市迅捷兴科技股份有限公司 Founded 2005 · SSE STAR Market 688655 (2021-05-11) Shenzhen Site 1 Xinfeng Ganzhou Zhuhai Site 3 Source: disclosures cited on this page
Entity and footprint map. Xunjiexing (JXPCB) and the production sites named in the disclosures cited above.

Two hundred and eighty, two hundred and sixty, one hundred and eighty-four

Xunjiexing publishes its capacity three times and gets three answers. The home page says 2.8 million m² a year of designed PCB capacity. A company article says the three provinces total more than 2.6 million m². The same article then itemises the plants: Shenzhen at 120,000 m² a year, Xinfeng at more than 1 million, Zhuhai phase one at 720,000. Add those and you get 1.84 million.

The spread between the smallest and the largest total is 960,000 m², which is more than Shenzhen and Zhuhai together. That is not a rounding difference. It is a different definition of what counts.

Note the word the site uses: 设计产能, designed capacity. None of the three numbers is described as output, and none is described as qualified capacity. Designed capacity is what the building and the wet lines were drawn for. It is a real number for a lender and a weak number for a purchase order.

The arithmetic that produces the middle figure

If you take Xinfeng at 1 million and Shenzhen at 120,000, the Zhuhai number decides everything. Phase one, which is what has been built, is 720,000 a year and gives 1.84 million. The full Zhuhai plan is quoted in the company’s own article at 1.5 million a year, and 120,000 plus 1,000,000 plus 1,500,000 gives 2.62 million.

That is within rounding of the 2.6 million the article states. So the middle figure is very likely the same plant list counted with Zhuhai’s whole plan instead of its first phase. The home page’s 2.8 million is a further 180,000 above that, and nothing on the site explains the extra.

This is a guess about arithmetic, not a disclosure. But it is a guess you can test with one question: what is installed today, and what is the qualified monthly output of each plant in the last quarter?

Zhuhai is a prototype plant, and its numbers are internally consistent

Zhuhai is described as 60,000 m² a month and 120,000 part numbers a month. Multiply the first by twelve and you get 720,000 a year, which matches the phase-one figure exactly. That kind of internal check is rare on Chinese factory sites and it is worth something: those two numbers were not written by different people on different days.

Divide area by jobs and you get half a square metre per part number. Shenzhen, at 120,000 m² a year and more than 6,500 part numbers a month, works out at about 1.5 m² per job. Zhuhai is designed for jobs a third of that size. A “smart prototype plant” in this case means panel utilisation built around very small, very mixed work, not around throughput.

Thirty-six layers live in one article

The company article says the group can process 0 to 36 layers, copper to 10 oz, and rigid-flex up to 8 flex layers, and credits 183 granted patents of which 46 are inventions. The product pages are more modest: a 16-layer rigid-flex with a 2-layer flex section, a 20-layer high-speed board on a VU9P acquisition module, a 2-layer 7 oz thick-copper build, an 8-layer first-order HDI and a 6-layer second-order HDI.

Every one of those is an example, not a ceiling. The 36-layer and 10 oz figures appear in a news article, not in a capability table, and the site carries no maximum-layer table at all. If your design needs 24 layers, the honest question is not “can you do 36” but “send me the stack-up you built last quarter at 24”.

The 24-hour claim, and where it comes from

The two-layer 24-hour turnaround is attached to the Shenzhen prototype plant specifically, not to the group. That is the useful version of the claim, because Shenzhen is the small-batch site and the fast lane presumably sits there. Whether Zhuhai, which only started production in the first half of 2025, holds the same clock is unstated.

The 130,000 prototypes a month on the home page also disagrees with the itemised figures, in the same way the capacity totals do. Zhuhai at 120,000 plus Shenzhen at 6,500 gives 126,500. Same pattern: the headline counts the plan, the plants count the floor.

Ten thousand customers, and what that is worth to you

Ten thousand customers served, cumulative, is a claim about the sales book rather than about service. What it does tell you is that the quoting desk handles a high volume of small enquiries, which usually means fast DFM feedback and a standard price list.

The flip side is queue position. A prototype plant with that many accounts will not hold a line for a buyer who sends four jobs a year. Ask what the standard slot is for a repeat customer and whether a scheduled weekly release is available.

What is not established

No employee count, no unified social credit code, no customer names, no certificate numbers. Zhuhai’s 1.5 million m² a year is a plan, not an installed figure, and nothing on the site confirms that the plant has reached even its 720,000 first phase. Xinfeng is in Ganzhou prefecture but the site names it as a place, not a city, so the plant’s administrative address should be confirmed before any audit is booked. The 0-36 layer range is unsupported by a capability table.

Published limits

Every value below is quoted as published by the company or a public record.

ParameterValue as published
Shenzhen prototype plant, two-layer lead time 24 hours
Zhuhai smart prototype plant, phase-one capacity 60,000 m2 a month
Zhuhai monthly part-number capability 120,000 part numbers a month
Xinfeng high-end plant, HDI capacity 10,000 m2 a month
Xinfeng volume plant capacity More than 1,000,000 m2 a year
Rigid-flex build example 16 layers with a 2-layer flex section
Thick-copper build example 2 layers at 7 oz
High-speed build example 20 layers on a VU9P acquisition module
HDI build example, first order 8 layers, 1st-order HDI
HDI build example, second order 6 layers, 2nd-order HDI
Five builds on the product pages Bar chart of 5 published figures in layers, published build examples. These are examples of boards the product pages show, not maximum capability. A news article claims 0-36 layers, but the site publishes no maximum-layer table; that figure is excluded here. High-speed 20 layers VU9P acquisition module Rigid-flex 16 layers includes a 2-layer flex section 1st-order HDI 8 layers first-order HDI build 2nd-order HDI 6 layers second-order HDI build Thick copper 2 layers 7 oz thick-copper build
Five builds on the product pages. layers, published build examples. These are examples of boards the product pages show, not maximum capability. A news article claims 0-36 layers, but the site publishes no maximum-layer table; that figure is excluded here. Source: Product pages and company article cited on this page.

Certifications on record

A certificate covers a legal entity and a site, not a brand. Scope and expiry are recorded where published.

StandardWhat the record shows
ISO 9001 / 14001 / 45001 Listed on the manufacturing-base page without certificate numbers or validity dates
IATF 16949 Attributed to the Shenzhen prototype plant; no certificate number, scope or expiry published
ISO 13485 Medical system listed without scope or validity, so covered product families are unclear
QC 080000 / ISO 50001 Hazardous-substance and energy management named; no certificate numbers given
UL 796 / UL 796F PCB-specific UL standards named, but no UL file numbers, so laminate coverage cannot be checked
CQC Product certification listed with no number and no scope

Ask this factory for a quote

Send one technical package and compare the replies. The RFQ checklist lists what to include; the quote specifications say which parameters change the price for the process you are buying.

Request a quote

Source and review conventions are described in how we verify. Corrections can be sent through the contact channel.