Aoshikang Technology (Yiyang)
奥士康科技股份有限公司 · Founded 2008 · SZSE 002913 (listed 2017-12-01)
Aoshikang's 2024 output of 6.70 million m2 covers Zhaoqing and Thailand too; the Yiyang 6.00 million m2 is an EIA design limit, not output.
Suits large-format, automotive and HDI buyers who want an A-share filer whose registered address is the Yiyang fab. Does not suit anyone treating the 6.70 million m2 output or 5,097 staff as Yiyang-only: both are consolidated, spanning Zhaoqing and Ayutthaya. Ask which site each certificate covers.
Identity and record
| Registered name (Chinese) | 奥士康科技股份有限公司 |
|---|---|
| Founded | 2008 |
| Listed | SZSE 002913 (listed 2017-12-01) |
| Production sites | Yiyang · Zhaoqing · Ayutthaya (Thailand) |
| Official website | https://www.askpcb.com |
| Evidence level | Public sources reviewed |
| Last reviewed | 2026-11-11 |
A listed issuer whose registered address is the fab
Most listed PCB groups keep their factories inside subsidiaries. Aoshikang is the reverse: the company quoted on the Shenzhen main board as 002913 is itself the Yiyang plant, and its registered address, Longtang Village in the Changchun Industrial Park of Ziyang District, is the production site. Its predecessor was registered in May 2008 as a Yiyang limited company; the joint-stock issuer listed on 1 December 2017. On this page, then, the legal person, the ASKPCB brand and the Hunan factory are one entity rather than a parent and a distant subsidiary. Registered capital is recorded as RMB 317.3605 million.
That structure is unusual, and it sets up the trap on the rest of this page. The issuer is a single factory, yet nearly every headline number it publishes is a group number. Overseas buyers also routinely read the Shenzhen office listed in the annual report as the head office. It is not.
Six million square metres is a permit, not an output
In April 2023 the Yiyang ecology bureau published an expansion notice for the existing Yiyang site. Before the change, Plant 1 held HDI at 2 million m2 a year and Plant 2 held 1.2 million m2 of high-density board plus 0.8 million m2 of automotive board. After the rebuild, inside the same two buildings and on no new land, the design figure becomes 6 million m2 a year: 2 million HDI, 2.4 million high-density, 1.6 million automotive.
The word that matters is design. Six million is what the environmental approval allows the whole Yiyang plant to reach. It is not a measured output, and the company does not publish output by base. The factory page says only that the Hunan base started production in 2010 and now runs two large intelligent PCB plants; it gives no floor area, no headcount and no monthly figure. Any claim of a specific Yiyang monthly capacity has to be traced back to the EIA or verified separately.
The 6.70 million figure belongs to three plants
For 2024 the annual report records PCB output of 6.7024 million m2, up 8.82% from 6.1592 million m2 in 2023, sales of 6.676 million m2 and stock of 0.6748 million m2. Revenue was RMB 4.566 billion, up 5.45%, with net profit attributable of RMB 353 million. None of that is Yiyang-only. The consolidation includes Zhaoqing and, by then, Ayutthaya in Thailand. The company site separately claims 2025 revenue of RMB 5.53 billion, up 21.11%, and 32nd place in Prismark’s 2025 global PCB ranking.
Two big numbers sit close together, 6 million m2 of Yiyang design capacity and 6.7024 million m2 of group output, and that proximity is a coincidence, not a utilisation rate. Do not divide one by the other. The filing also splits headcount: 2,933 in the parent company, 2,164 in the main subsidiaries, 5,097 combined. Only the first can even be approximated as the Yiyang entity; the 5,097 often quoted as Yiyang plant staff is a group count.
Put the site on the purchase order. Nothing in the filing assigns the 6.7024 million m2 to a named plant, so an order placed against the Yiyang entity carries no published guarantee about which base built it.
Two spray-tin lines that arrived from a neighbour
The same 2023 EIA file records that two hot-air solder-levelling lines, originally built but never commissioned at Yiyang Mingzhenghong Electronics, were relocated into the Aoshikang Yiyang plant, with leaded tin dropped for lead-free. Part of the surface-finishing capacity on this site was therefore not designed in from the start. A buyer estimating Yiyang output from floor area or from an equipment list will misread the finishing stage.
The detail links the two companies on the ground without merging them. Mingzhenghong is a different legal person with its own page in this set; shared process equipment is not shared ownership.
Four certificates on one page, six in the prose
The system-certification page lists four systems: ISO 14001:2015 and ISO 45001:2018 valid to 13 September 2027, SA8000 to 25 August 2027, AS9100D to 2 March 2028. No certificate numbers, no issuing bodies, and the AS9100D entry does not say whether Yiyang or Zhaoqing is covered. The factory-profile text, meanwhile, says the Hunan base passed ISO 9001, IATF 16949, ISO 14001 and ISO 45001, then defers validity to that same certification page, which shows neither ISO 9001 nor IATF 16949.
For an automotive programme that gap is the one to close. IATF 16949 is named in prose and absent from the certificates that can be inspected. Ask for the current certificate with its scope, site address and expiry.
Where this supplier fits, and where it does not
Large-format work is the clearest fit. The sustainability report says the Hunan base mass-produces 25 by 37 inch and 25 by 43 inch panels, with impedance control, solder-mask registration, back-drilling and large-panel routing developed there. Automotive and HDI buyers get an A-share filer with audited accounts and a registered address that is a real factory. Customers named in the 2024 sustainability report include Samsung, Epson, AMD, ZTE and Desay SV.
It does not suit a buyer who needs a Yiyang-only capacity or headcount figure in writing today, or who will treat a group output as that figure. Nor does it suit anyone who assumes the Shenzhen address in the annual report, Tower A, 32nd floor, Shenzhen Bay Innovation and Technology Centre, Nanshan District, is headquarters. That is an office; the registered and head-office address is Yiyang.
What is not established
No unified social credit code, no certificate numbers, no Yiyang-only output in m2, no Yiyang-only headcount and no Zhaoqing capacity figure are public. The 6 million m2 design capacity and the 6.7024 million m2 group output will keep appearing side by side; this page keeps them apart rather than reconciling them. The Zhaoqing base, run by wholly owned Guangdong Xizhen Circuit Technology on about 400 mu with no less than RMB 3.5 billion invested, and the Thai base set up in 2023 with phase one producing at the end of 2024, both stay on the plant list without published per-site numbers. R&D adds one more untagged figure: 721 staff, 12.04% of the workforce, and 480 granted domestic patents including 203 invention patents as of 30 June 2026, all group-level.
Published limits
Every value below is quoted as published by the company or a public record.
| Parameter | Value as published |
|---|---|
| Yiyang capacity before the 2023 expansion | Plant 1 HDI 2 million m2/a; Plant 2 high-density 1.2 million m2/a and automotive 0.8 million m2/a |
| Yiyang capacity after the 2023 expansion | HDI 2 million + high-density 2.4 million + automotive 1.6 million = 6 million m2/a (EIA design, not output) |
| Plant count and first production | Hunan base began production in 2010; now 2 large intelligent PCB plants |
| Large-format PCB | Mass-produced 25x37 inch and 25x43 inch panels |
| 2024 PCB output and sales | Output 6.7024 million m2 (2023: 6.1592 million, +8.82%); sales 6.676 million m2; stock 0.6748 million m2 |
| 2024 financials | Revenue RMB 4.566 billion (+5.45%); net profit attributable RMB 353 million |
| 2025 revenue and global rank | 2025 revenue RMB 5.53 billion (+21.11%); 32nd in Prismark 2025 global PCB top 100 |
| Headcount split | Parent company 2,933; main subsidiaries 2,164; combined 5,097 at period end |
| R&D staff and patents | 721 R&D staff (12.04% of total); 480 granted domestic patents, 203 invention, as of 2026-06-30 |
| Zhaoqing base investment | Guangdong base: no less than RMB 3.5 billion, about 400 mu of land, the group's largest high-end base |
Certifications on record
A certificate covers a legal entity and a site, not a brand. Scope and expiry are recorded where published.
| Standard | What the record shows |
|---|---|
| ISO 14001:2015 | Listed on the system-certification page, valid to 2027-09-13; no certificate number published and no plant coverage stated |
| ISO 45001:2018 | System-certification page, valid to 2027-09-13; no certificate number published |
| SA8000 | System-certification page, valid to 2027-08-25; certifying body and certificate number not published |
| AS9100D | System-certification page, valid to 2028-03-02; the page does not say whether Yiyang or Zhaoqing is covered |
| ISO 9001 / IATF 16949 | Named only in the factory-profile text as passed by the Hunan base; the certification page lists just four systems and no numbers |
Ask this factory for a quote
Send one technical package and compare the replies. The RFQ checklist lists what to include; the quote specifications say which parameters change the price for the process you are buying.
Source and review conventions are described in how we verify. Corrections can be sent through the contact channel.