Factory profile · Public sources reviewed

AT&S China (Shanghai)

奥特斯(中国)有限公司 · Shanghai · Founded 2001 · AT&S AG, Vienna Prime Market (ATS); Shanghai unit not listed

A Vienna-listed group's volume HDI line in Minhang, licensed for 970,000 m2 a year per a 2022 EIA - but IC substrates are Chongqing and Kulim business.

High-volume automotive HDI from a European-listed group's Minhang plant - a real Shanghai line, licensed for 970,000 m2/yr per a district EIA. Ask for certificate numbers and current utilisation; neither is published.

Identity and record

Only entries that were checked against a source are shown. A blank field means we have not confirmed it, not that it does not exist.
Registered name (Chinese) 奥特斯(中国)有限公司
Registered name (English) AT&S China Ltd.
Founded 2001
Listed AT&S AG, Vienna Prime Market (ATS); Shanghai unit not listed
Headquarters Shanghai
Production sites Shanghai (Minhang, Xinzhuang)
Official website https://ats.net/en/
Evidence levelPublic sources reviewed
Last reviewed2026-11-11
Registered entity and published production sites Registered entity AT&S China (Shanghai) and 1 named production sites, from the disclosures cited on this page. PUBLISHED RECORD AT&S China (Shanghai) 奥特斯(中国)有限公司 Founded 2001 · AT&S AG, Vienna Prime Market (ATS); Shangh… Shanghai Minhang, Xinzhua… Source: disclosures cited on this page
Entity and footprint map. AT&S China (Shanghai) and the production sites named in the disclosures cited above.

A Vienna group’s volume line inside Shanghai

AT&S China Ltd. is a 100% subsidiary of Austria’s AT&S AG, which trades on the Vienna Stock Exchange Prime Market under the symbol ATS. The Chinese entity was established in April 2001 at 5000 Jindu Rd, Minhang, and the plant has produced since 2002 — which makes this one of the rare Shanghai addresses where a PCB line actually runs. The site focuses on mobile devices, consumer electronics, computing and automotive, and the company page puts the Shanghai workforce at 3,488, an undated snapshot with no reference date attached.

Substrates are not made at this address

The group-level “substrate maker” claims belong to Chongqing and to Kulim in Malaysia. Shanghai makes HDI and mSAP boards — any-layer HDI up to 16 layers, mSAP lines at 25/25 µm. Even inside the company’s own pages the split is inconsistent: the 25/25 µm mSAP figure appears on the German-language Asia-Pacific plant page but not in the English Shanghai block, and the 16-layer any-layer claim is never separated into mass production versus sample capability. A substrate RFQ sent to Jindu Rd will end up in another city, or another country.

The 970,000 m² figure, and what it is not

Site capacity of 970,000 m² of PCB per year comes from a Minhang district environmental-impact disclosure for a 2022 technical modification — a regulator document, not a brochure. It is a site-wide permitted capacity, not product-specific output, not current utilisation, and not a number the plant’s own web pages repeat. Treat it as the ceiling the plant is licensed for, and ask for the loaded figure per product class.

Seven certificates, no numbers

The English plant page lists IATF 16949:2016, ISO 9001:2015, ISO 14001:2015, ISO 45001:2018, ISO 50001:2018, IECQ QC 080000:2017 and ISO/IEC 27001:2022 for Shanghai. The spread — energy management, hazardous-substance process control, information security — matches an automotive and computing customer base, but not one certificate number, scope statement or expiry date is shown. For an automotive PPAP that is the first request to make.

Press numbers: 180 mu and a smart-factory list

Two third-party facts frame the site’s scale. A press article puts the site at 180 mu (about 12 hectares) with cumulative investment above US$1 billion, and reported that the 2020 expansion was expected to lift output value by 16% to RMB 3.8 billion. Separately, the plant appeared on Shanghai’s 2023 municipal list of 100 smart factories, credited for HDI and SLP work. Neither is a company statement — the land area and the output projection both carry press attribution, so use them for orientation, not for an audit file.

Fit for automotive buyers

For a buyer who needs high-volume HDI from a Shanghai-addressed, European-listed group with a regulator-documented capacity figure, this is the strongest profile in this batch. The gaps are procedural rather than structural: no building area, no line count, no customer names and no certificate numbers appear anywhere, and the employee figure carries no date. None of that changes what the plant is; it changes what has to be requested before the first PO.

What the record does not settle

Building area, line count, certificate numbers, customer names and the unified social credit code are unpublished. Whether the 16-layer any-layer capability is a volume or a sample number is not stated, and no page confirms whether the English or the German bullet set for Shanghai is the current one.

Published limits

Every value below is quoted as published by the company or a public record.

ParameterValue as published
Anylayer HDI layer count, Shanghai Up to 16 layers
mSAP line/space, Shanghai 25/25 um
Annual PCB capacity, Shanghai site 970,000 m2 per year
Employees, Shanghai 3,488
Site area, Shanghai 180 mu (about 12 hectares)
Production start in Shanghai 2002

Certifications on record

A certificate covers a legal entity and a site, not a brand. Scope and expiry are recorded where published.

StandardWhat the record shows
IATF 16949:2016 Listed for the Shanghai plant; no certificate number, scope or expiry date shown.
ISO 9001:2015 Listed for Shanghai; certificate number and validity not stated.
ISO 14001:2015 Listed for Shanghai; no certificate details.
ISO 45001:2018 Listed for Shanghai; no certificate details.
ISO 50001:2018 Listed for Shanghai; energy-management scope not described.
IECQ QC 080000:2017 Listed for Shanghai; no certificate number or validity.
ISO/IEC 27001:2022 Listed for Shanghai; information-security scope not described.

Ask this factory for a quote

Send one technical package and compare the replies. The RFQ checklist lists what to include; the quote specifications say which parameters change the price for the process you are buying.

Request a quote

Source and review conventions are described in how we verify. Corrections can be sent through the contact channel.