Mingzhenghong Electronics (Yiyang)
明正宏电子(益阳)股份有限公司 · Founded 2013 · Not listed (converted to a joint-stock company in 2026)
The English page claims 410,000 m2 a month but its own items sum to 590,000; Shenzhen and Jiangmen are finishing plants under one Yiyang legal person.
Suits multilayer, HDI and metal-based buyers who can audit a supplier whose Chinese and English sites disagree. Does not suit anyone treating 410,000 m2 a month as Yiyang full-process capacity: Shenzhen and Jiangmen are finishing nodes of the same legal person, and the totals conflict. Ask which plant and which process step.
Identity and record
| Registered name (Chinese) | 明正宏电子(益阳)股份有限公司 |
|---|---|
| Founded | 2013 |
| Listed | Not listed (converted to a joint-stock company in 2026) |
| Production sites | Yiyang · Shenzhen · Jiangmen |
| Unified social credit code | 914309000771972196 |
| Official website | http://www.mzhpcb.cn |
| Evidence level | Public sources reviewed |
| Last reviewed | 2026-11-11 |
Which city actually builds the order?
The English About page opens with a confident 410,000 m2 a month. Its own four line items do not support it. Plant I is 250,000 m2 a month (150,000 multilayer plus 100,000 single-sided), Plant II is 200,000 m2 a month under construction, Shenzhen is 120,000 m2 a month and Jiangmen 20,000 m2 a month. Those sum to 590,000, not 410,000. The page offers no reconciliation.
For a buyer the first question is not the total but the perimeter. The Chinese site describes Yiyang as the full-process plant, from circuit imaging and lamination through to surface finish, while Shenzhen and Jiangmen are finishing or commercial nodes. So an order for a finished multilayer board is built in Yiyang; the two southern sites plate gold, deposit immersion gold or apply nickel-palladium-gold on panels that belong to the same company. The 120,000 and 20,000 are not extra Yiyang board capacity.
Why 410,000 does not add up
Read the four numbers again. 250,000 plus 200,000 plus 120,000 plus 20,000 is 590,000 m2 a month, well above the headline. One plausible reading is that Plant II, still being built, was excluded from the top line while left in the text; another is that the top line is a Chinese-site total carried over without editing. The company does not say which. This page reports both the headline and the sum rather than choosing.
Notice also what 410,000 equals: 41万 on the Chinese site, the sum of Phase 1 at 200,000 and Phase 2 at 210,000 m2 a month. The English page therefore mixes a Yiyang-only total with an itemised list that includes Shenzhen and Jiangmen. Two different perimeters are printed on one screen.
One legal person, three postcodes
Corporate records describe a single entity. The Yiyang company was registered on 13 September 2013 with RMB 100 million of capital and unified social credit code 914309000771972196, at the Changchun Industrial Park in Ziyang District. In 2026 the limited company was reorganised into a joint-stock company, 明正宏电子(益阳)股份有限公司, with a board and a supervisory board; the announcement says existing contracts, orders and qualifications stay valid. The Shenzhen branch and the Jiangmen finishing plant are nodes under that same legal person, not independent declarants.
This is the Shenzhen/Yiyang relationship the batch is about. Shenzhen is where the business started and where a commercial centre and a surface-treatment branch still sit; Yiyang is the registered legal person and the full-process factory. A quotation can carry a Shenzhen address and still be manufactured in Yiyang, because both addresses belong to one company.
The Chinese page moved on; the English one did not
Phase 1 has two published figures: 200,000 m2 a month on the Chinese site, 250,000 m2 a month on the English one, the latter split into 150,000 multilayer and 100,000 single-sided. Phase 2 has three: 210,000 m2 a month and already producing from 2025 on the Chinese site, 200,000 m2 a month still under construction on the English site, and 200,000 m2 a month once three lines run in the WeChat account. The EIA approval, a fourth source, allows 3 million m2 a year, which is 250,000 m2 a month.
The English page still says Plant II is being built. The Chinese page says Phase 2 M2 went live in 2025, and a trade-association article dates the first line to March 2025 with one line at 62,000 m2 a month by June and 185,000 m2 of total output that month. These are not contradictions to be smoothed over; they are snapshots taken at different times on pages that were not kept in step.
Four totals that cannot be compared
Four totals circulate: 410,000 m2 a month on the Chinese site (200,000 + 210,000); 320,000 m2 a month for both phases at full ramp in the WeChat account; 5.48 million m2 a year, about 457,000 m2 a month, from the EIA approval; and 185,000 m2 actually produced in June 2025. They measure a plan, a target, a permit and a month of output. None can be substituted for another.
Product mix matters too. The 2024 boiler EIA report says the existing 2.48 million m2 a year is 480,000 single-sided, 600,000 double-sided and 1,400,000 multilayer, yet actual multilayer output was only 600,000 to 700,000 m2 a year while first-half 2024 multilayer orders ran at 1,100,000 to 1,300,000 m2 a year. The marketing image is HDI and high-frequency; the permitted base is still mostly single and double sided.
Founded in 2003, registered in 2013
The company history says a factory was founded in 2003, in Shenzhen. The Yiyang legal person’s registration is 13 September 2013. Both are on the record and this page keeps both. A 2003 founding describes the business; a 2013 registration describes the entity a purchase order would name.
Other splits stay open as well. Staff are 1,600+ on the site and 1,133 insured in 2025 on Qichacha. Revenue is RMB 750 million for 2024 per district media and RMB 1.095 billion for 2022 per Qichacha; the years differ and no 2023 figure is public, so it is not possible to tell whether that is a different perimeter or a decline. A new HDI base was published in August 2026 at RMB 1.08 billion on 209.23 mu for 480,000 m2 a year, and the site also mentions a Phase 3 due May 2027; public sources do not say whether these are the same project.
Where this supplier fits
Use it for single-sided, double-sided, multilayer, HDI, high-frequency and metal-based boards where the process table is credible: 16 layers in volume with a 30-layer limit, 3/3 mil line and space down to 2.5/2.5 mil, 0.3-6.0 mm board thickness, 10:1 aspect ratio with an 18:1 limit, HDI up to 3+N+3 and 6 oz copper. Automotive is the declared industry. Customers named by district media include General Motors, Lenovo, Samsung, Xiaomi, SAIC Volkswagen, ZTE and Kingsignal.
It does not suit a buyer who needs one authoritative capacity number, or who will read 410,000 m2 a month as available Yiyang full-process capacity. Put the plant, the process step and the month on the RFQ, and ask which site’s certificate covers the order.
What remains open in the file
No certificate numbers, no certifying bodies, no expiry dates, no independently verified Phase 1 monthly output, no confirmed 2025 revenue and no statement of Phase 3’s status are public. IATF 16949, ISO 9001, ISO 14001, ISO 45001, QC 080000 and ISO 13485 appear only as dated entries in the company history, with no scope attached to Yiyang, Shenzhen or Jiangmen. The 410,000 headline and the 590,000 sum will keep appearing together; this page leaves both standing.
Published limits
Every value below is quoted as published by the company or a public record.
| Parameter | Value as published |
|---|---|
| Yiyang Phase 1 and Phase 2 | Phase 1 200,000 m2/month; Phase 2 210,000 m2/month (M2 live in 2025); Phase 3 due 2027-05 |
| Group totals as published (Chinese site) | Total 410,000 m2/month, 1,600+ staff, RMB 1.8 billion invested |
| English-site capacity wording | Top line 410,000 m2/month; text: Plant I 250,000, Plant II 200,000 being built, Shenzhen 120,000, Jiangmen 20,000 |
| Shenzhen and Jiangmen finishing plants | Shenzhen 120,000 m2/month; Jiangmen 20,000 m2/month: immersion gold, electro-gold, gold fingers, NiPdAu |
| Phase 2 EIA approval | RMB 630 million for a new 3# plant; +3 million m2/a; 5.48 million m2/a total once built |
| Existing capacity mix (2.48 million m2/a) | 480,000 single + 600,000 double + 1,400,000 multilayer m2/a; multilayer actually 600,000-700,000 m2/a |
| Phase 2 ramp-up record | March 2025 start; June single line 62,000 m2/month, total 185,000 m2; three lines 200,000; total 320,000 m2/month |
| Process capability | 16 layers volume, 30 limit; 3/3 mil L/S (2.5/2.5 limit); 0.3-6.0 mm; aspect 10:1 (18:1); HDI 3+N+3; 6 oz copper |
| 2026 new HDI base (EIA) | RMB 1.08 billion, 209.23 mu (139,489 m2), 273,000 m2 floor, 3 plants, 480,000 m2/a HDI once built |
| 2024 revenue and export mix | 2024 revenue RMB 750 million, domestic about 58%, overseas about 42%; 2025 forecast RMB 1.1 billion |
Certifications on record
A certificate covers a legal entity and a site, not a brand. Scope and expiry are recorded where published.
| Standard | What the record shows |
|---|---|
| IATF 16949 | Company history lists it in 2017 and 2020; no certificate number, body or expiry, and no plant coverage for Yiyang, Shenzhen or Jiangmen |
| ISO 9001 / ISO 14001 | Company history lists both in 2019; certificate numbers and expiry dates not published |
| ISO 45001 / QC 080000 | History lists ISO 45001 in 2022 and QC 080000 in 2023; no certificate numbers or expiry dates |
| ISO 13485 | Listed as obtained in 2024 for medical devices; scope, certificate number, body and expiry not published |
Ask this factory for a quote
Send one technical package and compare the replies. The RFQ checklist lists what to include; the quote specifications say which parameters change the price for the process you are buying.
Source and review conventions are described in how we verify. Corrections can be sent through the contact channel.