Factory profile · Public sources reviewed

Mankun Technology (Ji'an)

吉安满坤科技股份有限公司 · Founded 2008 · SZSE 301132 (ChiNext, listed 2022-08-10)

One Mankun page mixes a 2025 product mix of 22.22% with a Thailand design target of 67.27%, and states capacity that is a group total, not a Ji'an one.

Suits rigid multilayer and automotive power work with an audited SZSE filer. Does not suit anyone who quotes 16-30 layers, 0.10 mm lines or the 67.27% high-layer mix as Ji'an capability: those are Thailand project design figures, while 35 million ft2 and 2,400 staff are undated group totals.

Identity and record

Only entries that were checked against a source are shown. A blank field means we have not confirmed it, not that it does not exist.
Registered name (Chinese) 吉安满坤科技股份有限公司
Founded 2008
Listed SZSE 301132 (ChiNext, listed 2022-08-10)
Production sites Ji'an · Shenzhen · Prachinburi (Thailand, under construction)
Official website http://www.mankun.com
Evidence levelPublic sources reviewed
Last reviewed2026-11-11
Registered entity and published production sites Registered entity Mankun Technology (Ji'an) and 3 named production sites, from the disclosures cited on this page. PUBLISHED RECORD Mankun Technology (Ji'an) 吉安满坤科技股份有限公司 Founded 2008 · SZSE 301132 (ChiNext, listed 2022-08-10) Ji'an Site 1 Shenzhen Site 2 Prachinburi Thailand, under … Source: disclosures cited on this page
Entity and footprint map. Mankun Technology (Ji'an) and the production sites named in the disclosures cited above.

The 22.22 percent and the 67.27 percent are not the same plant

A single pair of percentages on the Mankun record describes two different things: a measured 2025 mix and a design target for a site still under construction. For 2025, six-layer-and-above boards plus HDI together made up 22.22 percent of what the company shipped. A Thailand project plan puts that same ratio at 67.27 percent. One is a present measurement at the current operation; the other is a plan for Prachinburi. The public pages do not label them as present versus planned, so a reader can easily take 67.27 percent as what Ji’an sends out today.

The gap is the whole story here. Mankun is a volume rigid-board maker moving up in layer count, and the number that describes the move is a plan, not a shipment. Ask for the last four quarters of six-layer-plus output before treating either figure as available capacity.

Thirty-five million square feet belongs to a group, not a phase

The About Us page states an annual capacity of 35 million square feet, about 3.25 million m2, and says it was formed after the Ji’an phase-two plant came on line at the end of 2018. That sentence is the only link between a number and a date in the whole capability set. It still does not say what phase one, phase two and the Shenzhen operation each contribute. The figure is a group total with no site split.

Headcount has the same problem, three ways. The homepage says 1,800, the About Us page says over 2,400, and a 2025 registry figure says 2,613, with no note on whether Shenzhen or Thailand staff are counted. Capacity utilisation is the exception: a convertible-bond reply gives 84.05, 90.95 and 87.18 percent for 2023, 2024 and 2025, so at least one series carries a stated reporting period. Use that series to frame the loading question, then ask what square metres were actually shipped last quarter, because nameplate and output are not the same thing.

2003, 2008, 2018 — which year is the factory

The group website says Mankun was founded in 2003, by which it means Shenzhen Mankun, the earlier entity. The Ji’an legal person, 吉安满坤科技股份有限公司, was registered on 9 April 2008 in the Jinggangshan development zone. Real volume at Ji’an followed the phase-two plant at end-2018. Those are three separate events and this page keeps them apart; the frontmatter founding year is 2008 because that is the Ji’an entity.

The listing is a separate date again. On 10 August 2022 the company joined the Shenzhen ChiNext board as 301132, issuing 36.87 million shares at RMB 26.80 and raising RMB 988 million, on 2021 revenue of RMB 1.189 billion and net profit of RMB 106.1 million. It is described as the first PCB listing in Jiangxi and the first local listing in the zone. That regulatory paper trail is real, but it dates the issuer, not the commissioning of any single line.

The layer count that lives in a Thailand filing

The 16 to 30 layer range, three-stage HDI and 0.10 to 0.15 mm line width that circulate for Mankun come from the Thailand project planning documents, not from a Ji’an production page. The plan is specific: 1.1 million m2 a year, RMB 470 million of raised capital, split into 360,000 m2 of four-layer, 560,000 m2 of six-layer-plus and 180,000 m2 of HDI. Zhiding reports 3300 W, 4200 W and 5500 W power-supply high-multilayer boards already in stable volume production, and positions the Thailand site at AI-server power.

Read the product scope accordingly. The 163 profile describes a base of single-, double-sided and multilayer rigid boards plus high-frequency, heavy-copper, metal-base, high-order HDI and embedded-component boards. That is the catalogue. The fine layer counts belong to a future plant. An RFQ for a 20-layer stack-up should ask which of the two sites, and which installed line, would run it.

Certificates without numbers, customers without scope

The About Us page lists IATF 16949, ISO 9001:2015, ISO 14001:2015, ISO 45001:2018, UL, CQC and RBA. None carries a certificate number, issuing body, plant scope or expiry, and no UL file number is published. The automotive product page names navigation, display terminals, centre consoles, EV batteries, lighting, lamps and instruments; the About Us page names Desay SV, Marelli, Visteon, Hella, CATL, Gree, CVTE, Hikvision and Dahua. Neither page says which site holds the automotive approval or fills those orders.

Two other figures are thin. The 166 patents including 28 invention patents, and the twelve straight years in the CPCA top 100 with 48th place in 2025, come from press and data pages rather than a filing quoted here. A 2025 revenue of RMB 1.647 billion and attributable profit of RMB 119 million appear only on a market-data page with no company announcement behind them, so this profile does not use them.

Where this leaves a sourcing decision

Ji’an is stated as the current main manufacturing base, Shenzhen as the group’s earlier entity and Thailand as the site under construction. That division is documented, and it is the inland-cluster fact this page can stand behind: the capacity sits in Jiangxi while the corporate origin sits on the coast. Nothing in the record gives freight, port or lead-time data, so no delivery conclusion is drawn from the address. What a buyer can act on is naming the base and the legal entity in the order, since a Shenzhen quotation and a Ji’an build are not the same paperwork.

Shortlist this issuer for rigid multilayer and automotive power work where an SZSE filing trail matters, and where 3300 W to 5500 W power boards or 166 patents are useful signals. Pass on it if the quotation depends on 16 to 30 layers, three-stage HDI or the 67.27 percent mix being available now at Ji’an; those are Thailand design values.

Still unverified

No unified social credit code, no certificate numbers, no Ji’an-only monthly capacity, no audited 2025 revenue from a primary announcement, and no Thailand capacity broken out by board type in a company filing. The 35 million ft2 total is undated and unsplit by site. The three headcounts and the 2003 versus 2008 founding years remain in tension, and this page keeps each side. The 22.22 percent present mix and the 67.27 percent project plan are printed separately rather than reconciled.

Published limits

Every value below is quoted as published by the company or a public record.

ParameterValue as published
Annual capacity 35 million ft2 a year; formed after the Ji'an phase-two plant started at end-2018
Headcount Over 2,400 staff per the About Us page
Product scope Single/double-sided and multilayer rigid mainly, plus high-speed, heavy-copper, metal-base, HDI and embedded boards
Power-supply high-multilayer 3300W, 4200W and 5500W power-supply high-multilayer boards in stable volume production
Capacity utilisation Utilisation 84.05%, 90.95% and 87.18% for 2023, 2024 and 2025
Product mix 2025: 6-layer-plus and HDI together 22.22%; Thailand project plans 67.27%
Patent portfolio 166 patents at end-2025, including 28 invention patents
CPCA ranking CPCA top-100 for 12 straight years 2014-2025; 48th among PCB makers in 2025
Automotive customers Customer list includes Desay SV, Marelli, Visteon, Hella, CATL, Gree, CVTE, Hikvision and Dahua
Capacity utilisation across three reported years Bar chart of 3 published figures in per cent, from a 2026 market write-up of the listed filer. A single write-up gives 2023, 2024 and 2025 utilisation. The 22.22% and 67.27% figures elsewhere on this page are product mix, not utilisation, and belong to different plants and periods. 2023 84.05% first year of the series 2024 90.95% highest of the three years 2025 87.18% latest year in the series
Capacity utilisation across three reported years. per cent, from a 2026 market write-up of the listed filer. A single write-up gives 2023, 2024 and 2025 utilisation. The 22.22% and 67.27% figures elsewhere on this page are product mix, not utilisation, and belong to different plants and periods. Source: 2026 market write-up quoting the utilisation series.

Certifications on record

A certificate covers a legal entity and a site, not a brand. Scope and expiry are recorded where published.

StandardWhat the record shows
IATF 16949:2016 About Us page lists the automotive quality system; no number, issuer or expiry published
ISO 9001:2015 About Us page lists the quality system with no certificate number or validity
ISO 14001:2015 / ISO 45001:2018 Environment and occupational health systems listed; no number and no scope published
UL / CQC / RBA Safety, CQC and RBA marks listed with no numbers; no UL file number published

Ask this factory for a quote

Send one technical package and compare the replies. The RFQ checklist lists what to include; the quote specifications say which parameters change the price for the process you are buying.

Request a quote

Source and review conventions are described in how we verify. Corrections can be sent through the contact channel.