Delton Technology (Guangzhou)
广州广合科技股份有限公司 · Guangdong · Founded 2002 · SZSE 001389 (2024); HKEX 01989 (2026)
A Hong Kong listing document says Guangzhou handles high-end server boards while Huangshi takes consumer and industrial work. The order split is written down.
Delton is a listed, four-base PCB group with unusually good public capacity data. The catch is that its own prospectus says orders are allocated between the Guangzhou and Huangshi plants, so the entity on your quote may not be the plant that builds the boards. Strong for server and switch work; confirm the site in writing.
Identity and record
| Registered name (Chinese) | 广州广合科技股份有限公司 |
|---|---|
| Founded | 2002 |
| Listed | SZSE 001389 (2024); HKEX 01989 (2026) |
| Headquarters | Guangdong |
| Production sites | Guangzhou (Huangpu) · Dongguan · Huangshi (Hubei) · Prachinburi (Thailand) |
| Unified social credit code | 91440116739749431N |
| Official website | http://www.delton.com.cn |
| Evidence level | Public sources reviewed |
| Last reviewed | 2026-11-11 |
A prospectus that says where your order goes
Most PCB groups describe their plants as a list. Delton’s Hong Kong listing document goes further and states the allocation rule: the Huangshi base mainly handles consumer and industrial boards plus part of the mid-to-low-end server range, while the Guangzhou base concentrates on high-end server boards, and the group periodically moves sales orders between the two to optimise each site’s capacity. That single paragraph is more useful to a buyer than a product brochure, because it tells you the plant is a variable in the quotation.
If you send a server-board enquiry to the Guangzhou headquarters, the commercial entity and the manufacturing site can be different companies in different provinces. Ask which one will appear on the purchase order, which one holds the quality approvals, and whether the order can be reassigned after placement. Reassignment is not a defect here; it is disclosed practice. It only becomes a problem when nobody told the customer’s incoming inspection team.
Why a falling capacity number was not a cut
The same document gives designed capacity by base. Guangzhou runs 954,000 m2 in 2022, 917,000 m2 in 2023 and 1,003,000 m2 in 2024, with 780,000 m2 for the first nine months of 2025. Huangshi rises from 560,000 to 834,000 to 873,000 m2 over the same three years. Read alone, the 2023 dip at Guangzhou looks like lost capability. The footnote explains it: consumer and industrial orders were shifted to Huangshi, leaving Guangzhou to build more complex boards with higher layer counts and harder processes, and the same lines therefore produce fewer square metres per year.
A 2024 note adds that the Dongguan plant starting up let some process steps move out, lifting Guangzhou’s designed capacity again. So square metres per year is a function of product mix, not a fixed measure of plant size. Never use a single year’s capacity figure from this table to rank two suppliers, and never compare it with a competitor’s monthly output without knowing what product the number assumes.
Utilisation is the more honest signal
For the nine months to September 2025, the document reports 98.7 percent utilisation at Guangzhou, 76.3 percent at Huangshi and 12.0 percent in Thailand on 150,000 m2 of designed capacity and 18,000 m2 of actual output. Guangzhou is effectively full, which matches the company’s own description of a capacity bottleneck. Thailand is a new line in ramp, not a mature alternative yet.
For scheduling, these three numbers mean three different conversations. A high-end server programme routed to Guangzhou has almost no slack in the disclosed figures and should be quoted with a realistic lead time. A consumer or industrial programme can plausibly be offered from Huangshi, where headroom exists. An order proposed for Thailand in 2026 should be treated as a qualification project with a learning curve, not as a drop-in second source.
Planned layers are not shipped layers
The company’s May 2026 news page describes the Yunqing base in Huangpu: about RMB 2.6bn of investment, 27,452.5 m2 of land, roughly 122,900 m2 of floor area, product averaging 30 layers with five-stage HDI, and production expected in December 2026. A separate encyclopaedia entry on the same project quotes a maximum above 120 layers, ten-stage HDI and annual output of about 3.6m square feet. Those are different measures, one an average and one a ceiling, from sources of different authority.
As of this review the topping-out has happened; volume production has not. Keep the 30-layer and 120-layer claims out of a current capability matrix. Ask for the commissioned line list and the first-article results after start-up, then re-check the numbers.
Two records that do not describe the same thing
The homepage gives a 29,500 m2 site figure and 4,998 staff; the registry classifies the company under other technology promotion services (M7590) even though its business scope explicitly includes printed circuit board manufacturing, and shows registered capital rising from RMB 425.265m to RMB 472.446m in September 2026. A buyer screening suppliers by industry code alone would discard an operating PCB group. Use the business scope, the licence and the plant address, not the statistical category.
A product page supplies the vocabulary the prospectus omits
The Hong Kong document is unusually good on square metres and unusually thin on process: it says which base takes which class of order, but publishes no drills, trace widths or stack-ups. The company’s own AI switch-board page fills that gap for one board family. It describes a typical design of 20 or more layers, board thickness of at least 3 mm, a 0.2 mm minimum drill, aspect ratio of 15:1 or above, double-sided back drilling, and optional Skip Via and POFV constructions. Very Low Loss laminate or better, fast-speed ink and low-profile brown oxide are specified for signal integrity, with line and space around 0.09/0.09 mm and impedance held to ±8 percent on some nets.
Read that as a design envelope, not a factory capability sheet. Nothing on the page says those limits can all be met on one board, that a 0.09 mm feature and a 15:1 plated hole are qualified together, or which of the four bases owns the equipment. The product page names no site; the prospectus names sites but no process. A buyer has two documents that each answer half a question, and neither is a quotation. Use the product page to frame the technical exchange, then require a dated, site-specific capability document before treating any of those numbers as buildable for your stack-up.
What the first technical package has to fix
Because the prospectus discloses that sales orders are periodically reallocated between Guangzhou and Huangshi, a specification describing only the finished board will not hold a quotation together. Agree the stack-up, laminate grade and insertion-loss test method before comparing prices. Mark the nets that need ±8 percent impedance and state how the coupons will be measured and reported. Set the back-drill stub allowance and say which via types get POFV or resin plugging. Name the press-fit connector series before drilling is released, because the finished-hole tolerance follows the connector, not the drill chart.
Attach three commercial items to the same package: the legal entity issuing the quotation, the site that will run the order and the certificate holder covering that site; a written answer on whether the order may be reassigned after placement and on what notice; and the records due with each lot — impedance coupons, back-drill cross-sections, laminate lot traceability and the first-article report. None of these is in the listing document, and none can be inferred from a capacity table. Agreeing them in the first exchange is cheaper than discovering a plant transfer at incoming inspection, particularly when the Guangzhou line is disclosed at 98.7 percent utilisation and has almost no slack.
What is not established
- No UL, IATF or ISO certificate numbers, holders or scopes were located for any named base.
- The current product mix actually running at each plant was not verified beyond the 2025 disclosure.
- Whether a given order can be moved between bases after placement is not stated in these sources.
- Yunqing output after December 2026, and the higher maximum-layer claim, remain unconfirmed.
- The product-page figures are typical design values for one board family; site-level equipment lists and qualified capability limits are not published in the material reviewed.
Published limits
Every value below is quoted as published by the company or a public record.
| Parameter | Value as published |
|---|---|
| Group scale stated on the homepage | Founded 2002; 4,998 staff; RMB 5.485bn annual revenue; 29,500 m2 site |
| Two listing venues | SZSE main board 001389 in 2024; HKEX main board 01989 in 2026 |
| Four production bases named by the company | Guangzhou, Dongguan, Huangshi and Prachinburi (Thailand) |
| Guangzhou designed capacity, 2022 to 2025 | 954,000 / 917,000 / 1,003,000 m2 per year; 780,000 m2 for nine months of 2025 |
| Huangshi designed capacity, 2022 to 2025 | 560,000 / 834,000 / 873,000 m2 per year; 724,000 m2 for nine months of 2025 |
| Utilisation rates, nine months to September 2025 | Guangzhou 98.7%; Huangshi 76.3%; Thailand 12.0% on 150,000 m2 designed capacity |
| Written rule for allocating orders between bases | Huangshi takes consumer, industrial and some mid-to-low-end server boards; Guangzhou focuses on high-end server boards |
| Why Guangzhou designed capacity fell in 2023 | Consumer and industrial orders moved to Huangshi, so more complex higher-layer boards reduced designed capacity |
| Yunqing base project scope | About RMB 2.6bn; 27,452.5 m2 land; 122,900 m2 floor area; average 30 layers and 5-stage HDI |
| Yunqing timing stated by the company | Topped out 2026-05-20; production expected to start in December 2026 |
| Registry category against business scope | Industry code M7590 other technology promotion, while business scope includes PCB manufacturing |
| 2026 capital increase | Registered capital rose from RMB 425.265m to RMB 472.446m on 2026-09-16 |
| AI switch-board design envelope on the product page | 20+ layers; 3 mm+ thickness; 0.2 mm min drill; 15:1 aspect ratio; double-sided back drill |
| Materials and feature sizes for that same board | Very Low Loss laminate or better; 0.09/0.09 mm line and space; ±8% impedance on some nets |
| Constructions named on the same product page | Skip Via, POFV, low-profile brown oxide and fast-speed ink; optional on this board family |
Certifications on record
A certificate covers a legal entity and a site, not a brand. Scope and expiry are recorded where published.
| Standard | What the record shows |
|---|---|
| No certificate number in the sources | The capacity table and the two company pages reviewed give no UL, IATF or ISO certificate numbers or holder names tied to a specific base. |
Ask this factory for a quote
Send one technical package and compare the replies. The RFQ checklist lists what to include; the quote specifications say which parameters change the price for the process you are buying.
Source and review conventions are described in how we verify. Corrections can be sent through the contact channel.