Factory profile · Public sources reviewed

Jiangsu Yuantai Electronic Technology

江苏源泰电子科技有限公司 · Jiangsu · Founded 2020 · Not listed; private with a Jiangyan state-capital minority shareholder

Yuantai's 1.8 million m2 a year and RMB 1.5 billion sales are planned or full-production targets, not achieved output. First phase started in late 2023.

Yuantai is an early-stage Jiangyan plant: rigid, flexible and rigid-flex boards with four management systems claimed but no certificate numbers. Use it only after an on-site capability review, because every published volume and revenue figure is a target, not a delivered result. Confirm the Chinese legal entity before ordering.

Identity and record

Only entries that were checked against a source are shown. A blank field means we have not confirmed it, not that it does not exist.
Registered name (Chinese) 江苏源泰电子科技有限公司
Registered name (English) Jiangsu Yuantai Electronic Technology Co., Ltd.
Founded 2020
Listed Not listed; private with a Jiangyan state-capital minority shareholder
Headquarters Jiangsu
Production sites Jiangyan (Taizhou)
Official website https://www.origintek.cn/
Evidence levelPublic sources reviewed
Last reviewed2026-11-11
Registered entity and published production sites Registered entity Jiangsu Yuantai Electronic Technology and 1 named production sites, from the disclosures cited on this page. PUBLISHED RECORD Jiangsu Yuantai Electronic Techno… 江苏源泰电子科技有限公司 Founded 2020 · Not listed; private with a Jiangyan state-… Jiangyan Taizhou Source: disclosures cited on this page
Entity and footprint map. Jiangsu Yuantai Electronic Technology and the production sites named in the disclosures cited above.

Every headline number is a forecast

Read the Yuantai material once and it looks like a large, running factory; read the verb tenses and almost every figure turns out to be a plan. The Chinese legal entity is 江苏源泰电子科技有限公司, in English Jiangsu Yuantai Electronic Technology Co., Ltd. It is a private mixed-ownership company, not a subsidiary of a listed group: it was set up in January 2020 in the Jiangyan Economic Development Zone by three shareholders — Taizhou Sanshui Investment Development (a Jiangyan state-capital platform), Jingjiang Ruifeng Electronic Technology and Jingjiang Ruitai Electronic Materials. The chairman, Su Ping, came from Shenzhen. There is no parent annual report here and no consolidated group filing to lean on; the company builds its own plant and lines rather than acting as a trading or contract-manufacturing shell.

The project is stated at RMB 1 billion of total investment on 93,666.7 m² of land with 150,709.77 m² of buildings. Planned annual capacity is 1.8 million m² of rigid and flexible board with an RMB 3 billion sales target. Taizhou News puts full-production invoiced sales at RMB 1.5 billion and tax at RMB 100 million a year, and the Jiangyan district government repeats the 1.8 million m² figure as a full-output projection. Every one of those is labelled planned, at full production, or projected. No achieved output or realised revenue for 2024 or 2025 has been published.

A first phase that only started at the end of 2023

The gap between the plan and the plant is the most useful fact in the file. Phase 1 was completed and entered production only at the end of 2023. A local report from that ramp says orders were full after a little over a month, four customer products were in sampling, and the workforce was nearly a hundred. The 2026 government hiring notice still describes phase 1 with about 1,600 staff — a figure that sits awkwardly beside the ramp number and is not reconciled anywhere. A January 2024 district-leader visit says the line uses domestically leading processes with imported key equipment, which is a government observer’s phrase, not a third-party audit. So a buyer touring in 2026 is looking at a young first phase, not the seven-figure output the headline numbers imply.

Four management systems, no certificate numbers

The company says it has passed ISO 9001, IATF 16949, ISO 14001 and IECQ QC 080000. That is a full set for automotive and hazardous-substance work, but it appears only as a self-statement on the about page — no certificate numbers, no scope, no validity dates and no certification body. A district-government note about “domestically leading” process equipment is likewise an observation without an audit behind it. Request the four certificates with their scopes before treating any of them as qualification evidence.

Who actually owns the company

Ownership is where this page differs from the Japanese and Taiwanese subsidiaries in the same batch. Yuantai has no foreign parent and no stock-exchange listing; its shareholders include a Jiangyan state-capital investment platform alongside two Jingjiang electronics companies. The ultimate beneficial owner and actual controller are not published. For procurement that means there is no listed-parent annual report to read and no group consolidated disclosure to cross-check — the company’s own site and local government notices are the entire public record. Jiangyan has no city page in this series, so this profile is filed under Jiangsu; the county-level notices quoted above are the administrative paper trail a site visit would have to follow, with no municipal portal sitting above them.

A 4L-PCB product page

The product centre currently lists 4L-PCB and similar rigid boards. That is the only concrete product named anywhere. The site publishes no layer ceiling, no minimum line width or spacing, no hole diameter and no board thickness, even though the scope text talks about high-end rigid-flex. The gap between “high-end rigid-flex” as a positioning phrase and a product page showing a four-layer rigid board is worth keeping in view. Ask for a current capability table rather than assuming the FPC and rigid-flex lines are qualified.

What a buyer can and cannot ask of Yuantai today

Rigid and, in principle, flexible and rigid-flex boards from a new domestic plant are the plausible fit, especially for a buyer willing to qualify a young supplier. What cannot be asked on this record is a committed monthly volume at 1.8 million m² a year, a certified automotive process without certificate numbers, or a layer ceiling. Confirm the legal entity on the order, request the four certificates, and ask which phase is actually running the quoted line.

Questions the published material leaves open

The registry code, the layer maximum, minimum line width, a current 2026 headcount, realised 2025 output and registered capital are all missing from the public material. The founding year is taken from “January 2020 settlement” because the registry date has not been verified. Every volume and revenue figure in the file is a target, and the four management-system claims carry no verifiable detail.

Published limits

Every value below is quoted as published by the company or a public record.

ParameterValue as published
Total project investment RMB 1 billion
Land and floor area 93,666.7 m2 of land; 150,709.77 m2 of total building area
Planned annual capacity 1.8 million m2 of rigid and flexible board; RMB 3 billion sales target
Product scope R&D, design and production of rigid PCB and FPC, positioned at high-end rigid-flex
Product listing Product centre currently lists 4L-PCB and similar rigid boards
Management systems claimed ISO 9001, IATF 16949, ISO 14001 and IECQ QC 080000
Full-output tax and sales RMB 1.5 billion invoiced sales and RMB 100 million tax a year at full production
Government projection District review: 1.8 million m2 of rigid and flexible board a year at full output
Phase 1 ramp Phase 1 completed and started end-2023; full orders after one month, nearly 100 staff
Plant address 518 Weijiu Road, Sanshui Sub-district, Jiangyan District, Taizhou, Jiangsu
Two sales projections, neither achieved Bar chart of 2 published figures in RMB million, projected annual sales at full output. The project material gives an RMB 3bn sales target; Taizhou News gives RMB 1.5bn invoiced sales at full production. Both are forecasts, with no realised 2024-2025 revenue published. Investment and tax plans are excluded. Sales target 3,000m RMB 3bn sales target for the project Full output 1,500m RMB 1.5bn invoiced sales at full run
Two sales projections, neither achieved. RMB million, projected annual sales at full output. The project material gives an RMB 3bn sales target; Taizhou News gives RMB 1.5bn invoiced sales at full production. Both are forecasts, with no realised 2024-2025 revenue published. Investment and tax plans are excluded. Source: Project material and Taizhou News quoted on this page.

Certifications on record

A certificate covers a legal entity and a site, not a brand. Scope and expiry are recorded where published.

StandardWhat the record shows
ISO 9001 / IATF 16949 Company-stated quality and automotive QMS; no certificate number, scope or validity published
ISO 14001 / QC 080000 Company-stated environmental and hazardous-substance systems; no certificate number or validity

Ask this factory for a quote

Send one technical package and compare the replies. The RFQ checklist lists what to include; the quote specifications say which parameters change the price for the process you are buying.

Request a quote

Source and review conventions are described in how we verify. Corrections can be sent through the contact channel.