Factory profile · Public sources reviewed

Zhejiang Leuchtek (Roche Tech)

浙江罗奇泰克科技股份有限公司 · Zhejiang · Founded 1986 · Not listed

Leuchtek stamps aluminium LED boards in Pan'an at 150,000 m2 a month. Its ISO certificates are withdrawn revisions and its own name appears three ways.

Leuchtek is a lighting board factory: stamped aluminium substrates, T5 and T8 strips up to 1.5 m, single-sided and CEM consumer boards at volume. Use it for lamp boards, not for controlled-impedance multilayer work, and ask for current certificate numbers rather than reading the ones on its site.

Identity and record

Only entries that were checked against a source are shown. A blank field means we have not confirmed it, not that it does not exist.
Registered name (Chinese) 浙江罗奇泰克科技股份有限公司
Registered name (English) Zhejiang Leuchtek Technology Co., Ltd.
Founded 1986
Listed Not listed
Headquarters Zhejiang
Production sites Pan'an (Jinhua) · Ningbo · Nanjing
Official website http://leuchtek.com.cn/en/index.php?catid=23
Evidence levelPublic sources reviewed
Last reviewed2026-11-11
Registered entity and published production sites Registered entity Zhejiang Leuchtek (Roche Tech) and 3 named production sites, from the disclosures cited on this page. PUBLISHED RECORD Zhejiang Leuchtek (Roche Tech) 浙江罗奇泰克科技股份有限公司 Founded 1986 · Not listed Pan'an Jinhua Ningbo Site 2 Nanjing Site 3 Source: disclosures cited on this page
Entity and footprint map. Zhejiang Leuchtek (Roche Tech) and the production sites named in the disclosures cited above.

An LED board plant, measured in stamped aluminium

Zhejiang Leuchtek publishes two capacity figures and both are large: 150,000 m² a month of single-sided rigid board, and 100,000 m² a month of LED board across aluminium substrate, FR-4, CEM-3 and CEM-1. The Pan’an plant is listed at 100,000 m² of building, with 30 punch presses between 80 and 200 tonnes, a 1.2 by 2.0 m photoplotter, and a stated ability to produce lamp boards between 1 and 1.5 m long.

Thirty presses is the detail that identifies the business. A plant running presses at that ratio to its etchers is stamping aluminium for T5 and T8 tubes, not routing FR-4. Lamp boards are punched because the substrate is soft, the outline is a straight strip, and the volume runs into millions of pieces.

Three names for one company

The English site cannot agree on its own name. The profile page reads Zhejiang Leuchtek Technology Co., Ltd.; the page header reads Zhejiang Roche Tech Technology Co., Ltd; the body text renders it Zhejiang Luoqitaike Technology Co., Ltd. The Chinese legal name settles it — 浙江罗奇泰克科技股份有限公司 — where Leuchtek is a transliteration of 罗奇泰克 and the header form is an unedited machine translation of 罗氏科技.

This matters at the registry. Search the English name and nothing comes back. Search 浙江罗奇泰克 and the record appears, with 磐安县线路板厂 as its predecessor: a county-level board workshop that has been running since 1986, which makes it older than most of the factories on this site.

The certificates are withdrawn revisions

Quality and environmental management are quoted as ISO 9001:2008 and ISO 14001:2004. Both revisions were replaced by the 2015 editions, and certificates to the old editions stopped being valid at the September 2018 transition deadline. No certificate number, no issuing body and no expiry date is published for either.

UL and CQC are claimed for products, again with no file number. For a lighting board that is the one certificate a customer cannot skip: the UL file number determines which laminate the assembly may carry and which marking it may print.

The compliance page therefore has not been touched since at least 2018. That is not evidence the certificates lapsed — plenty of Chinese factories hold current certificates and never update a website — but it does mean the paperwork has to be requested rather than read.

Ningbo is a separate company, and its website is gone

Leuchtek describes two wholly owned subsidiaries: Ningbo Economic and Technological Development Zone Dongya Circuit Board Co., Ltd., and a Nanjing company. The Ningbo entity sits on Lijiang Road in Beilun’s Dagang industrial zone, and appears in a third-party trade card with 50,000 m² a month of single-sided board plus 10,000 m² a month of double-sided and multilayer at a 1:6 aspect ratio.

Two cautions. Those Ningbo numbers come from a directory card rather than from the company, and directory cards are often a decade stale. And Dongya’s own domain, dypcb.com, now resolves to a parked lander: no product pages, no capability data, nothing left to check. If a quotation arrives from the Ningbo entity, establish which plant will build the order and put it in writing.

What this factory is good for

Lighting, at volume. Aluminium substrates, T5 and T8 strips, single-sided control boards, CEM-1 and CEM-3 consumer boards. A 1.5 m lamp board is a real capability — it needs a press bed and an exposure area that small shops do not own.

What is not on offer: no layer count is published anywhere. Double-sided and multilayer are named without a maximum, and there is no impedance control, no HDI and no heavy copper claim. Do not send this factory a 6-layer industrial control board and expect a competent answer.

How to use this profile

Send the drawing, the substrate, the finish and the monthly volume, then ask for three things: the UL file number with the laminate it covers, current ISO 9001 and ISO 14001 certificate numbers with expiry dates, and whether the quotation comes from Pan’an or from Ningbo.

For stamped aluminium, add the tooling question — punch die cost, lead time and who owns the die. Lamp board programmes live or die on tooling amortisation, and a supplier holding your die holds your programme.

What is not established

No unified social credit code, no registered capital, no employee count, no listing status and no current certificate numbers. Revenue and output value are not published. The 1:6 aspect ratio attributed to Ningbo is a directory figure that could not be matched against any first-party page, and no second source confirms the 50,000 m² monthly figure for that plant.

Published limits

Every value below is quoted as published by the company or a public record.

ParameterValue as published
Single-sided rigid board capacity 150,000 m² per month
LED board capacity, aluminium, FR-4, CEM-3, CEM-1 100,000 m² per month
Pan'an plant building area 100,000 m²
Punch presses 30 presses, 80 t to 200 t
Photoplotter and exposure size 1.2 x 2.0 m
Longest lamp board produced, T5 and T8 stamped aluminium 1 m to 1.5 m

Certifications on record

A certificate covers a legal entity and a site, not a brand. Scope and expiry are recorded where published.

StandardWhat the record shows
UL Claimed for products; no UL file number published, so the laminate and marking it covers are unknown
CQC Claimed for products; no certificate number published
ISO 9001:2008 Withdrawn revision; certificates to the 2008 edition lapsed at the September 2018 transition deadline
ISO 14001:2004 Withdrawn revision; superseded by the 2015 edition, same 2018 transition deadline

Ask this factory for a quote

Send one technical package and compare the replies. The RFQ checklist lists what to include; the quote specifications say which parameters change the price for the process you are buying.

Request a quote

Source and review conventions are described in how we verify. Corrections can be sent through the contact channel.