Factory profile · Public sources reviewed

Camelot Electronics (Qingyuan)

金禄电子科技股份有限公司 · Guangdong · Founded 2006 · SZSE ChiNext 301282, listed 2022-08

Camelot quotes 4.3m m2 of annual PCB capacity as of end-2025, but two new lines only started in July and September 2026. The figure is a snapshot.

Camelot is a listed automotive-board maker with 2,824 staff and three bases. Use it for multilayer automotive and new AI-power work, but treat every capacity figure as dated: two lines started only in July and September 2026, and the homepage brand list is not a supplier qualification. Get the current site list.

Identity and record

Only entries that were checked against a source are shown. A blank field means we have not confirmed it, not that it does not exist.
Registered name (Chinese) 金禄电子科技股份有限公司
Founded 2006
Listed SZSE ChiNext 301282, listed 2022-08
Headquarters Guangdong
Production sites Qingyuan (Guangdong) · Anlu (Hubei) · Suining (Sichuan)
Unified social credit code 914418007929985760
Official website https://www.camelotpcb.com/
Evidence levelPublic sources reviewed
Last reviewed2026-11-11
Registered entity and published production sites Registered entity Camelot Electronics (Qingyuan) and 3 named production sites, from the disclosures cited on this page. PUBLISHED RECORD Camelot Electronics (Qingyuan) 金禄电子科技股份有限公司 Founded 2006 · SZSE ChiNext 301282, listed 2022-08 Qingyuan Guangdong Anlu Hubei Suining Sichuan Source: disclosures cited on this page
Entity and footprint map. Camelot Electronics (Qingyuan) and the production sites named in the disclosures cited above.

Every capacity number here has a date

The homepage puts several figures on one screen: about 514 mu of land, monthly output above 330,000 m2, and more than 4.3m m2 of annual PCB capacity built by the end of 2025 across Qingyuan, Anlu and Suining. That last phrase is the important one. The company’s third-quarter 2026 announcement then says an Anlu multilayer expansion began production in July 2026 adding 25,000 m2 per month, and the first Qingyuan line for AI compute products started in September 2026 adding 50,000 m2 per month.

So the 4.3m figure is a snapshot, not a ceiling. Two lines now running were outside it. If you are building a capacity model for a 2027 programme, do not add the homepage annual number and the two monthly additions together without knowing what the annual figure already includes, and do not treat a line commissioned in September as qualified volume. Ask for a current line list with commissioning dates.

A price mix shift, not just more boards

The same Q3 announcement reports order value up about 112 percent and average unit price up about 55 percent year on year, with Q3 average price 51 percent above Q2. It attributes this to AI power supplies, AI server CPU and connector boards, AI edge hardware, satellite phased-array antennas and humanoid robots, alongside deliberate shedding of low-margin, small-volume business. Nine-month revenue reached RMB 2,401.31m, up 64.28 percent, and net profit RMB 185.73m, up 202.21 percent.

That is a meaningful change in what the factory wants to make. A buyer with a conventional multilayer automotive programme should ask whether its product still fits the mix and which base it will be scheduled on. Rising average selling prices can reflect richer boards, but they can also reflect laminate pass-through; the announcement mentions broad price adjustments while copper-clad laminate and prepreg costs rose. Operating cash flow fell 19.28 percent because precious-metal purchases consumed more cash.

The brand list is an application list

The homepage names a long run of vehicle marques whose products the boards eventually reach, and separately lists ZTE, Siemens, LG, Honeywell and ABB as end customers. A terminal application is not an approved-vendor status. Nothing in the sources reviewed says Camelot holds a direct supplier code with any of those carmakers, and automotive PCB supply normally runs through a tier-one module maker with its own qualification chain.

For a real automotive order, the documents that matter are the IATF 16949 certificate with its holder and site address, the PPAP or APQP package for the specific part number, and the change-control agreement for a line transfer between Qingyuan and Anlu. The homepage acronym list includes UL, CQC, IATF 16949, ISO 13485 and AEO, but gives no file numbers, holders or scopes for any of them.

One more registry category that misleads

The registry classifies the company under C3981, resistor, capacitor and inductor component manufacturing, while its business scope covers research, production and sale of hybrid integrated circuits and fine printed circuit boards. It shows 2,824 employees, incorporation on 19 October 2006 and a September 2026 capital increase from RMB 151.140m to RMB 210.934m. The company says production began in 2012, six years after incorporation.

As with several other profiles on this site, the four-digit industry code is a poor filter for finding a board shop. The plant address, the environmental approval and the business scope are the usable fields. And a six-year gap between registration and production is a normal build-out timeline, not an anomaly, but it means a “founded in 2006” claim should not be read as “making boards since 2006”.

How to write the RFQ

Put three dated questions first. Which of the three bases will run this part, and is that base named on the current certificate set? Does the quoted lead time assume the July or September 2026 lines, and what is their current yield? What is the laminate price-adjustment clause given the pass-through described in the Q3 announcement? The company publishes more useful operating detail than most PCB suppliers in this directory, but the homepage and the filings describe different moments in time.

A limits table that answers the wrong question

Camelot is one of the few groups here that publishes an actual process table. Dated 2025, it gives a 28-layer maximum, board thickness from 0.3 to 5.0 mm, a 0.1 mm minimum hole, 16:1 maximum plated through-hole aspect ratio and 1:1 for microvias, base copper from 1/3 to 6 oz on both inner and outer layers, 0.05/0.05 mm minimum line and space, ±8 percent impedance, a 0.15 mm minimum BGA pad at 0.4 mm pitch and warp of no more than 0.5 percent. Surface finishes are itemised by thickness — immersion gold 0.025–0.125 μm over 3–5 μm nickel, immersion silver 0.12–0.5 μm, HASL 1.0–40 μm, carbon ink 10–30 μm — and a separate column lists long-short and segmented gold fingers, depth-controlled drilling, back drilling, via filling, mechanical blind vias and buried copper blocks.

The trouble is not missing data; it is what the data proves. Each number is an independent maximum or minimum. Nothing says 28 layers can be combined with 0.05 mm traces, 6 oz copper and 0.1 mm holes on one part, or that any of it applies to the line that started in September 2026. The table itself separates prototypes from volume: CNC tolerance is ±0.05 mm for samples and ±0.1 mm for production, and maximum panel size drops from 600 × 1180 mm to 600 × 860 mm. A prototype built inside the sample column is therefore not evidence that the volume column is qualified for your part number. Ask for the limits that apply to this part, at this base, in volume.

Reading the product list as a process question

The homepage product display shows four applications: battery-management boards, motor controllers, supercharger piles and on-board chargers. Each makes a different demand on a board shop, and none appears in the 2025 limits table as a combined requirement. High-current work needs heavy copper and controlled thermal paths; high-voltage sections need creepage and isolation rules tied to the end standard; a BMS board needs lot traceability that survives the life of the vehicle platform.

None of that is established by an application photograph or a marque list. For a real order the release documents are per part number: an IATF 16949 certificate naming the holder and the site address, the PPAP or APQP package, the change-control agreement if the work moves between Qingyuan and Anlu, and the agreed laminate price-adjustment clause. The capability table is useful for screening out a shop that plainly cannot build the geometry. It is not a substitute for any of those four documents, and it does not tell you whether a conventional multilayer automotive programme still fits a mix that the Q3 disclosure says is shifting toward AI power, server and connector boards.

What is not established

  • No UL, IATF 16949 or CQC certificate number, holder or site scope was located.
  • Per-base capacity and utilisation after the two 2026 line starts are not published here.
  • Direct approved-vendor relationships with the named vehicle brands were not verified.
  • The scope of the 2025 CNAS laboratory accreditation was not found.
  • Whether the Suining base is fully operational was not stated in the sources reviewed.

Published limits

Every value below is quoted as published by the company or a public record.

ParameterValue as published
Capacity snapshot with an explicit cutoff Over 4.3m m2 of annual PCB capacity built as of end-2025 across three bases
Homepage operational figures About 514 mu of site area; over 330,000 m2 monthly capacity; sales in more than 20 countries
Incorporation, production start and listing Founded 2006; production began 2012; listed on ChiNext in August 2022 as 301282
Registry category against product Industry code C3981 resistor, capacitor and inductor manufacturing; scope covers fine PCBs
Registry: staff, capital and credit code 2,824 employees; USCC 914418007929985760; capital rose to RMB 210.934m in 2026-09
Hubei expansion line, July 2026 Anlu multilayer expansion started production in 2026-07, adding 25,000 m2 per month
Qingyuan AI line, September 2026 First line for AI compute products started in 2026-09, adding 50,000 m2 per month
Order book shift in the first three quarters of 2026 Order value up about 112%; average unit price up about 55% year on year
Nine-month 2026 results Revenue RMB 2,401.31m, up 64.28%; net profit RMB 185.73m, up 202.21%
Why cash flow lagged profit Operating cash flow RMB 95.71m, down 19.28% as copper, gold salt and tin purchases rose
Homepage end-brand list Names Tesla, BMW, Audi, Mercedes, BYD, Geely, VW and Toyota among end applications
Published 2025 process ceiling 28 layers max; 0.3-5.0 mm board thickness; 0.1 mm min hole; 16:1 plated through-hole aspect ratio
Feature sizes and electrical tolerance 0.05/0.05 mm line and space, inner and outer; ±8% impedance; 0.15 mm BGA pad; 0.4 mm BGA pitch
Prototype versus volume limits on the same table CNC tolerance ±0.05 mm for samples, ±0.1 mm for volume; max panel 600x1180 mm vs 600x860 mm
Special processes listed alongside the limits Depth-controlled drilling, back drilling, via filling, mechanical blind vias, buried copper blocks
Monthly capacity additions disclosed in 2026 Bar chart of 3 published figures in m2 per month, from the homepage and the Q3 2026 results coverage. The homepage figure and the two 2026 line starts come from different dates and different disclosures; they must not be added together. Homepage figure 330,000 m2 Over 330,000 m2 monthly; cutoff not stated on the page Anlu, July 2026 +25,000 m2 Multilayer expansion began production in July 2026 Qingyuan AI line +50,000 m2 First AI-compute line began production in September 2026
Monthly capacity additions disclosed in 2026. m2 per month, from the homepage and the Q3 2026 results coverage. The homepage figure and the two 2026 line starts come from different dates and different disclosures; they must not be added together. Source: company homepage and Q3 2026 results coverage.

Certifications on record

A certificate covers a legal entity and a site, not a brand. Scope and expiry are recorded where published.

StandardWhat the record shows
Acronyms without file numbers The homepage lists ISO9001, ISO14001, UL, CQC, IATF16949, ISO13485 and AEO but gives no numbers, holders or scopes.
CNAS laboratory accreditation, 2025 A company news item dated 2025-08-14 reports CNAS accreditation; the scope of the laboratory was not located.

Ask this factory for a quote

Send one technical package and compare the replies. The RFQ checklist lists what to include; the quote specifications say which parameters change the price for the process you are buying.

Request a quote

Source and review conventions are described in how we verify. Corrections can be sent through the contact channel.