Hangzhou Lin'an Pengyu
杭州临安鹏宇电子有限公司 · Hangzhou, Zhejiang · Founded 2000 · Not listed
Pengyu has 16,807 m2 of site in Lin'an, 4 to 12 layer boards and named appliance customers. It also states its headcount three different ways.
Pengyu is what a real small factory looks like: 16,807 m² of site, a 4 to 12 layer range, named appliance customers and no capacity claim in square metres. Shortlist it for a single-sided or 4 to 8 layer board where a small supplier and a direct engineering conversation are acceptable, not for anything above 12 layers.
Identity and record
| Registered name (Chinese) | 杭州临安鹏宇电子有限公司 |
|---|---|
| Registered name (English) | Hangzhou Lin'an Pengyu Electronics Co., Ltd. |
| Founded | 2000 |
| Listed | Not listed |
| Headquarters | Hangzhou, Zhejiang |
| Production sites | Hangzhou (Lin'an District, Jinnan Street) |
| Official website | https://www.pengyupcb.cn |
| Evidence level | Public sources reviewed |
| Last reviewed | 2026-11-11 |
What a small factory’s numbers look like
16,807.6 m² of site, more than 12,000 m² of standard workshop, 180 employees and a board range of 4 to 12 layers. Founded in March 2000 in Jinnan Street, Lin’an District, Hangzhou, with an M2 plant built in 2012 for double-sided and multilayer work and an M3 plant added in 2023 to expand capacity.
That is a small factory by Chinese standards, and the profile lists it because the scale is stated precisely. A site area to one decimal place is the kind of number that comes from a cadastral document rather than a marketing deck.
The headcount does not agree with itself
The Chinese site’s news page says 180 employees. The Chinese homepage has a counter reading 200-plus. The English About page says 550-plus.
Three numbers, one company, no dates. The 180 figure appears in a dated news item and is used here, but a buyer should treat any of them as approximate. This is the sort of discrepancy a video call resolves in two minutes: ask how many people are on the line that will build your board.
Two published boards with real specifications
The site shows finished examples rather than a capability table, and the examples are specific. An 8-layer industrial control board on Ventec Tg175 laminate, 1.6 mm thick, ENIG finish, with BGA, impedance control and a half-hole edge, at 0.1/0.1 mm lines and a 0.2 mm minimum hole with an 8:1 aspect ratio. A 2-layer heavy-copper board at 2 oz outer copper, 0.3 mm minimum hole, 5:1 aspect and HASL.
Those two boards describe the factory’s real range better than a maximum table would. 0.1 mm lines and 8:1 aspect are modest numbers, consistent with industrial control and power work rather than phone boards.
Appliance customers are the customer base
The company names Philips, Samsung, Yamaha, Panasonic, SMK, LG, Midea and Gree as customers, and its product scope is single-sided, carbon single-sided, carbon through-hole, silver through-hole, copper through-hole, PTH double-sided and multilayer of 4 to 12 layers.
This is a supplier built around consumer appliances and small electronics, where cost per square metre and delivery reliability decide the order. That is a different business from prototype quick-turn, and it explains the layer range: appliance boards are rarely more than eight layers.
The Hangzhou location matters for one reason
Lin’an is a district of Hangzhou with a long PCB cluster, and this is one of the few verifiable factories there with a published address and specification pages. For a buyer sourcing in Zhejiang, that is the practical value: a nearby supplier for a board that does not need a tier-one factory.
If your programme needs IATF discipline with site-level certificates, keep looking. The IATF listing here is a claim without a number, and there is no evidence of an automotive customer base in the named accounts.
How to use this profile
Send the Gerber set, the stack-up, the surface finish and the annual quantity. Ask for the process capability sheet and the certificate numbers, and ask which plant, M2 or M3, will run the order.
Given the size, the useful questions are commercial: minimum order quantity, panel utilisation policy, how many days from file release to shipment, and whether the factory handles the impedance test report or expects you to specify the coupon.
What is not established
No monthly output or annual capacity in square metres is published. A 2022 energy-review approval for a 2.1 million m² expansion exists in a government portal that could not be retrieved, and secondary reports say the project was suspended, so it is not counted as capacity here. No certificate numbers, no UL file number, no unified social credit code. A layer count above 12 is not offered.
Published limits
Every value below is quoted as published by the company or a public record.
| Parameter | Value as published |
|---|---|
| Multilayer board range | 4 to 12 layers |
| Min line width and space, published 8-layer industrial board | 0.1/0.1 mm |
| Min hole diameter and aspect ratio, that board | 0.2 mm, 8:1 |
| Construction and finish of that 8-layer board | Ventec Tg175 laminate, 1.6 mm, ENIG, BGA, impedance control, half hole |
| Heavy copper, published 2-layer board | 2 oz outer copper, 0.3 mm minimum hole, 5:1 aspect ratio, HASL |
| Plant site area | 16,807.6 m² |
| Standard workshop area | More than 12,000 m² |
| Employees, per the Chinese site news page | 180 |
Certifications on record
A certificate covers a legal entity and a site, not a brand. Scope and expiry are recorded where published.
| Standard | What the record shows |
|---|---|
| IATF 16949 | Stated in the certificate list, with 2016 certification noted in the company history; no number or body |
| ISO 9001 | Stated; no number or issuing body published |
| ISO 14001 and ISO 45001 | Stated; no numbers published |
| UL and CQC | Stated as product safety certifications; no UL file number published |
Ask this factory for a quote
Send one technical package and compare the replies. The RFQ checklist lists what to include; the quote specifications say which parameters change the price for the process you are buying.
Source and review conventions are described in how we verify. Corrections can be sent through the contact channel.