Factory profile · Public sources reviewed

Dongguan Lianqiao Electronics (L-Bridge)

东莞联桥电子有限公司 · Dongguan, Guangdong · Founded 2002 · Not listed

A 16,000 m2 appliance-board plant that publishes real dimensions for four boards and dates for four of its five certificates. The fifth is contested.

A small foreign-owned plant in Chashan making 2 to 16 layer appliance and power boards at about 93,000 m2 a month, with copper and aluminium substrate capability. Suits power supply, air-conditioner, LED and automotive lighting boards. Thin on everything else, and its QC080000 status is disputed.

Identity and record

Only entries that were checked against a source are shown. A blank field means we have not confirmed it, not that it does not exist.
Registered name (Chinese) 东莞联桥电子有限公司
Registered name (English) Dongguan Lianqiao Electronics Co., Ltd.
Founded 2002
Listed Not listed
Headquarters Dongguan, Guangdong
Production sites Dongguan (Chashan)
Official website http://www.l-bridge.com.cn
Evidence levelPublic sources reviewed
Last reviewed2026-11-11
Registered entity and published production sites Registered entity Dongguan Lianqiao Electronics (L-Bridge) and 1 named production sites, from the disclosures cited on this page. PUBLISHED RECORD Dongguan Lianqiao Electronics (L-… 东莞联桥电子有限公司 Founded 2002 · Not listed Dongguan Chashan Source: disclosures cited on this page
Entity and footprint map. Dongguan Lianqiao Electronics (L-Bridge) and the production sites named in the disclosures cited above.

Four boards with numbers attached

Most small PCB websites publish a capability line and a photograph of the shop floor. This one publishes four boards, each with a specification.

A six-layer power supply board: 2.0 mm thick, 0.4 mm minimum hole, 7.874 mil minimum line and space. An eight-layer camera module board: 1.0 mm, 0.2 mm minimum hole, 3 mil line against 4 mil space. A two-layer automotive lamp board: 1.6 mm, a stated 24 mil minimum hole, 146 × 274 mm outline. A single-sided aluminium LED heat-sink board: 1.0 mm, 198 × 276 mm.

Two details in that list tell you engineers wrote it. The 7.874 mil is 0.2 mm converted into mils and left unrounded — nobody in marketing produces that number. And the pairing of 3 mil line with 4 mil space is a real design rule, not a rounded claim.

The spread is the story. A camera board at 3/4 mil needs fine-line etching, thin laminate and controlled handling. A 2.0 mm power board at 0.4 mm holes needs heavy copper and a drill programme that will not snap. Those are different production disciplines running in a 16,000 m² building.

The 24 mil minimum hole on the lamp board deserves a second look. That is 0.61 mm, which is a large minimum for a two-layer board and reads more like a connector or mounting hole than a drilled via. Ask before you copy it into a drawing.

Five certificates, and the sixth is disputed

The certification page shows five: ISO 9001:2015, IATF 16949:2016, ISO 14001:2015, ISO 45001:2018 and IECQ QC080000:2017, presented as certificate images in Chinese and English versions, with no numbers in the text.

Third-party certificate databases fill in the dates, and this is where a small supplier becomes unusually checkable. IATF 16949 runs from 21 November 2023 to 20 November 2026. ISO 14001 and ISO 45001 were both reissued on 21 May 2025, valid to 25 July 2028 and 27 May 2028. Two systems reissued in the same week is the signature of a surveillance audit done properly.

QC080000 is the exception. The company’s own page lists it as a valid certificate. A certificate database records its status as suspended from 7 October 2025. Both statements are on the record; neither has been withdrawn, and nothing published reconciles them.

For an appliance or power-supply buyer that matters more than it sounds. QC080000 is the process-control certificate behind hazardous-substance declarations. Its suspension does not mean the plant is shipping restricted materials — it means the process audit that supports the declaration is not currently in force. If your contract requires a valid QC080000, request the certificate as of today, in PDF, before you accept the compliance annex. If your requirement is RoHS compliance only, ask for test reports instead and treat the certificate as a separate question.

A hundred thousand square feet a month, and who is left to run it

Capacity is one million square feet a month, roughly 93,000 m². On a 36,000 m² site, according to the 2019 government profile, that is a high output density — this is a plant running tight, not a plant with space to spare.

Headcount is where the record wobbles. A 2017 company social-media post says more than 1,300. The 2019 government profile says 810. The 2025 registry digest says 491, and another cut of the same record says 476.

Work the arithmetic. At 476 people and 93,000 m² a month, each employee would be producing about 195 m² of finished board a month. That is well above what this class of work supports. At 810 the figure is about 115 m², which is credible for a plant with this much single-sided and aluminium in the mix. At 1,300 it is 72 m², comfortable.

So the 476 figure most likely counts one legal perimeter — insured staff, or one workshop — rather than the plant. The honest reading is that nobody has published a current headcount for the whole site, and that a supplier questionnaire asking for one will produce a number that needs a definition attached.

Capital shows the same pattern: USD 25 million registered in both the government profile and the registry, against USD 32.5 million of “total capital” in company material. Site area is 36,000 m² officially and 38,000 m² in company material, with 16,000 m² of building mentioned only by the company.

Sixteen, fourteen or twelve

The layer range has three versions. The company site says 2 to 16. The 2019 government profile lists 2, 4, 6, 8, 12 and 14 — no 16. The registry digest says 2 to 12.

A 16-layer quotation and a 12-layer quotation may therefore come from the same plant on different days, and the difference is not academic: 16 layers needs more lamination cycles and tighter registration than 12, and a plant that has run 12 for years may take a 16-layer enquiry as a special.

Ask which range the process control plan covers. If the answer is 12, a 16-layer design is a first-off, and first-offs are where yield surprises live.

What the file supports, and what it does not

What it supports is a genuine appliance and power-board speciality. Etching and plating are in-house, with OSP, ENIG, lead-free HASL, halogen-free, ENEPIG, immersion tin and immersion silver available. Products named on the site are air-conditioner boards, power boards, LED heat-sink aluminium and automotive lamps. The government profile names Foxconn, Philips, Delta and CIP as customers and says output goes to Europe, the US and Japan. Foreign-owned, one legal person, founded 28 March 2002.

What it does not support is anything modern beyond that. The site’s copyright line still reads 2011, the news section has not moved, and the production equipment page is a single photograph with no equipment list. There is no impedance claim, no HDI, no blind or buried via statement and no panel size maximum.

Fit: 2 to 8 layer power and appliance boards at volume, aluminium and copper substrate, automotive lighting, and buyers who value a supplier that answers with dimensions. Not a fit: HDI, high-speed controlled impedance, more than 16 layers, or any programme that needs a current, complete web presence as part of its due diligence.

What is not established

No unified social credit code. No headcount for the whole site that any two sources agree on. No registered capital beyond the USD 25 million figure repeated by two sources. No shareholder name — a third party names Moment International Holdings, the company publishes nothing. No capacity utilisation, no actual monthly output and no customer concentration. And no resolution of the QC080000 status.

Published limits

Every value below is quoted as published by the company or a public record.

ParameterValue as published
Monthly capacity 1 million square feet a month, about 93,000 m2
Layer range Mainly 2 to 16 layer high-performance PCB
Metal-core substrates Copper-based and aluminium-based boards both produced
Six-layer power supply board 2.0 mm thick, 0.4 mm minimum hole, 7.874 mil minimum line and space
Eight-layer camera module board 1.0 mm thick, 0.2 mm minimum hole, 3 mil line and 4 mil space
Two-layer automotive lamp board 1.6 mm thick, 24 mil minimum hole, 146 x 274 mm outline
Single-sided aluminium LED heat-sink board 1.0 mm thick, 198 x 276 mm outline
Sixteen, fourteen or twelve Bar chart of 3 published figures in layers, upper bound of each published layer range. Three sources give three ceilings for the same plant and none is reconciled. The monthly capacity of about 93,000 m2 and the 476 / 810 / 1,300 headcount arithmetic are separate questions and are excluded. Company site 16 layers 2 to 16 layers on the company site 2019 profile 14 layers 2, 4, 6, 8, 12 and 14; no 16 Registry digest 12 layers 2 to 12 layers in the registry digest
Sixteen, fourteen or twelve. layers, upper bound of each published layer range. Three sources give three ceilings for the same plant and none is reconciled. The monthly capacity of about 93,000 m2 and the 476 / 810 / 1,300 headcount arithmetic are separate questions and are excluded. Source: Company site, 2019 government profile and registry digest.

Certifications on record

A certificate covers a legal entity and a site, not a brand. Scope and expiry are recorded where published.

StandardWhat the record shows
ISO 9001:2015 Listed as a certificate image in Chinese and English versions; no number in the page text
IATF 16949:2016 Third-party certificate database gives 21 November 2023 to 20 November 2026; the site itself shows no number
ISO 14001:2015 Database shows reissue on 21 May 2025, valid to 25 July 2028; site lists the system only
ISO 45001:2018 Database shows reissue on 21 May 2025, valid to 27 May 2028; site lists the system only
IECQ QC080000:2017 Site lists it as valid; a certificate database records status as suspended from 7 October 2025. Both stand

Ask this factory for a quote

Send one technical package and compare the replies. The RFQ checklist lists what to include; the quote specifications say which parameters change the price for the process you are buying.

Request a quote

Source and review conventions are described in how we verify. Corrections can be sent through the contact channel.